Jump to content
SAU Community

Recommended Posts

All part have been on the car less then 1000km

plazmaman plenum and throttle body comes with all bolts $ 950

6boost high manifold $ 850

kompact turbosmart bov with gasket $100

50mm 6boost turbosmart waste gate with 17psi spring and v band clamps $450

z32 afm with harness $100

gt3076r .82 with turbo fittings $ 900

r34 gtt ecu with nistune $400

turbo to cat 3 inch exhaust with race cat $300

oil relocate kit $120

Siemens deka 550cc injectors with harness direct fit for the r34 gtt $210

if anyone is interested in all the part im willing to do a deal and il include a intercooler and piping with silicon joints and clamps and everything else needed

You can contact me on 0405659093 if u need any more details or anything else

I couldn't add all pics for some reason i can send them to anyone interested

thank you Simo

post-61653-0-03690800-1400919793_thumb.jpgpost-61653-0-60716100-1400919817_thumb.jpg

post-61653-0-29287700-1400919711_thumb.jpg post-61653-0-80486500-1400919844_thumb.jpg

post-61653-0-54332800-1400919607_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/443575-r34-gtt-performance-parts/
Share on other sites

guy and girls

the garret gt3076r is still up for sail it in perfect condition it will come with all fittings and turbo lines r by gcg and gaskets

turbo smart kompact bov is still for fail it has r34 gtt flang on it perfect condition

oil relocate kit is still for sail the lines are brand new never been used

turbo back exhaust

all the people that have got my other things can tell you everything was in perfect or new condition

everything has been on the car less then 1000km

post-61653-0-31666100-1401084352_thumb.jpgpost-61653-0-26842200-1401085460_thumb.jpg

post-61653-0-75030700-1401085492_thumb.jpg

post-61653-0-37757800-1401084294_thumb.jpg

Edited by grim reaper
  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok i will get those 310mm. I found one but on a different site. This is the description on those...is it ok? Technical parameters: - Axle: front. - Disc type: ventilated. - Number of holes: 5. - Disc diameter: 310mm. - Total height with center: 54mm. - Thickness (new/min.): 30/28mm. - Designed for brake calipers manufacturer: Sumitomo.
    • You Gregged a whole racetrack!?
    • Look for broken wire or bad connector at the motor. Might not be it, but is worth starting there, as it is easy.
    • Hi everyone, I’m having an issue with my R32 GT-R. Sometimes, when the car goes over a bump or experiences some vibration, the 4WD warning light comes on the dashboard. When I check the code from the control unit in the trunk, it shows Code 19 – ETS Motor. However, everything seems to be working fine — if I turn off the engine and restart the car, the light goes away and everything functions normally. Has anyone experienced this before? Where should I start troubleshooting this issue? Thanks in advance!
    • I'm back from the dyno - again! I went looking for someone who knew LS's and had a roller dyno, to see how it shaped up compared to everything else and confirm the powerband really is peaking where Mr Mamo says it should. TLDR: The dyno result I got this time definitely had the shape of how it feels on the road and finally 'makes sense'. Also we had a bit more time to play with timing on the dyno, it turns out the common practice in LS is to lower the timing around peak torque and restore it to max after. So given a car was on the dyno and mostly dialled in already, it was time for tweaking. Luis at APS is definitely knowledgable when it came to this and had overlays ready to go and was happy to share. If you map out your cylinder airmass you start seeing graphs that look a LOT like the engine's torque curve. The good thing also is if you map out your timing curve when you're avoiding knock... this curve very much looks like the inverse of the airmass curve. The result? Well it's another 10.7kw/14hp kw from where I drove it in at. Pretty much everywhere, too. As to how much this car actually makes in Hub Dyno numbers, American Dyno numbers, or Mainline dyno numbers, I say I don't know and it's gone up ~25kw since I started tinkering lol. It IS interesting how the shorter ratio gears I have aren't scaled right on this dyno - 6840RPM is 199KMH, not 175KMH. I have also seen other printouts here with cars with less mods at much higher "kmh" for their RPM due Commodores having 3.45's or longer (!) rear diff ratios maxing out 4th gear which is the 1:1 gear on the T56. Does this matter? No, not really. The real answer is go to the strip and see what it traps, but: I guess I should have gone last Sunday...
×
×
  • Create New...