Jump to content
SAU Community

Recommended Posts

For sale is my 1997 Nissan Pulsar VZR. This car was specially sourced and imported by Iron Chef Imports and complied by JLM. I am the first Australian owner.I bought the car in
August 2012 with 62 000 genuine KM. This car was completely stock and has a full Japanese logbook service history from the day it left the Nissan dealer. It has been my daily and now has
88 xxx KM, and has been serviced every 5-10 thousand Km. All servicing has been carried out by JLM. The car now runs beautifully as i have spared no expense in
maintaining it, and since owning it i have replaced the following:

- Clutch
- Front brake Rotors
- All four brake pads
- Left and right front, outer CV boots (october 2013)

- Rocker cover gasket
- All coolant hoses
_ Radiator with SSS core (nov 2013)

-Front engine mount
-rear engine mount
- Vct solenoid (may 2014)

This car is a non accident car and the body is in excellent condition. Since owning the car i've had two panel beaters inspect the body and both have found that all
bolts , welds, seals and panel gaps are as per factory. The doors, boot, bonnet and guards have never been removed, and the chassis is very straight.

post-95869-0-56158000-1400984233_thumb.jpgpost-95869-0-34228200-1400984272_thumb.jpgpost-95869-0-42859300-1400984399_thumb.jpgpost-95869-0-88320700-1400984424_thumb.jpgpost-95869-0-30619100-1400984470_thumb.jpgpost-95869-0-99195800-1400984506_thumb.jpgpost-95869-0-42067000-1400984537_thumb.jpgpost-95869-0-90748800-1400984571_thumb.jpgpost-95869-0-43264800-1400984600_thumb.jpgpost-95869-0-69028000-1400984662_thumb.jpgpost-95869-0-33754600-1400984692_thumb.jpgpost-95869-0-61728200-1400984728_thumb.jpgpost-95869-0-58038600-1400984757_thumb.jpgpost-95869-0-23130700-1400984790_thumb.jpgpost-95869-0-85212000-1400984826_thumb.jpgpost-95869-0-43519700-1400984857_thumb.jpgpost-95869-0-03699200-1400984886_thumb.jpgpost-95869-0-75137300-1400984916_thumb.jpgpost-95869-0-82171600-1400987197_thumb.jpgpost-95869-0-16010700-1400987247_thumb.jpgpost-95869-0-23398900-1400987587_thumb.jpg

Having previously owned an Aus delivered Pulsar SSS, i can tell you that the performance of the VZR is considerably better and the NEO VVL also provides better fuel
economy. The VZR is also cheaper to Insure as it's 1.6 L engine does not classify it as a sports car. In short a perfect P Plater Car or a great daily that's still
plenty of fun on the weekend.

Car has 6 months rego.

I am selling to make way for a skyline. :D

All inspections are welcome, this is a very clean and original car. Condition will not dissapoint.
Location - Sydney
Price-$ 10 000 ONO
Please PM me for contact details.

Jason

Edited by the spruce moose
Link to comment
https://www.sau.com.au/forums/topic/443605-pulsar-vzr-sr16ve-iron-chef-sourced/
Share on other sites

Recently i was given the figure of 12k to import a car similar to the condition of mine by JLM, that is if you are able to find one without accident damage.

As per the rules, if you are not interested in buying the car DONT post.

Thanks

nice clean example.

jump on http://forum.pulsar.org.au/forum.php maken an account and advertise. will be more likely to get interest there than here.

  • 2 weeks later...

https://m.facebook.com/story.php?story_fbid=655958541140055&substory_index=0&id=109130862489495

Not sure if the link works, but it's for a n1 VZ-R selling for 12.9k.

Guess I will have to eat my words.

  • 4 weeks later...
  • 2 months later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...