Jump to content
SAU Community

Personal Import

theforce

By theforce,
in Victoria

 Share

Recommended Posts

theforce Community Regular

theforce

Posted
Posted (edited)

Hey Guys/Girls,

I'm in the process of making up my mind on importing a car from Japan but read on VicRoads website that cars after 1988 can't be imported unless its a personal import or by a registered shop.

Eligibility

Only a Registered Automotive Workshop can import a vehicle that is manufactured after 1988 and that is not a personal import.

If you wish to personally import a vehicle you must:

  • be of driving age
  • be an Australian citizen or a migrant holding permanent residency in Australia
  • have owned and used the vehicle while overseas for a period of not less than twelve consecutive calendar months
  • not have imported another vehicle into Australia in this category in the last 12 months.

So where does this leave the average joe who hasn't owned the car for 12 months overseas or doesn't own a workshop? or does the above quote only apply to less than 15 year old cars?

Obviously I don't wish to dish out a couple of G's for someone to do the importing for me, I've looked it up and it can be done quite easily.

Any help would be much appreciated.

:D

Edited by theforce
Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/
Share on other sites
Odium Grand Master

Odium

Posted
Posted

Go through an importer, it's not worth the extra headaches to do it yourself... They know the in's and out's of the system, and they know how to fill out all of the paperwork and who needs to be paid when... All it takes is one letter to be wrong on some of the forms and it's delayed in the wrong place for a few days, and you're suddenly hit with Storage and Holding fees...

Do it yourself if you wish, but I've seen a lot of people on here who have had it come back and bite them in the arse.

Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7295973
Share on other sites
viper2002 Rising Star

viper2002

Posted
Posted

Yep definitely get an import shop to do it for you. If you were to import it, would you be going over to Japan personally to inspect it?

The benefit of the importers is if you can't make it over to Japan to inspect it, a lot of them provide detailed inspections by mechanics and give you a full report on what's wrong with the car, along with hundreds of photos before shipping it over (you'll need to pay a deposit before getting this information).

Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7295984
Share on other sites
theforce Community Regular

theforce

Posted
  • Author
Posted

I'm deciding between a R32/R33 GTR or a Mitsubishi GTO (or 3000GT whatever its called) but recently just found out pre-1996 GTO cannot be imported which rules out the pop-up headlight front end :angry:

Can anyone quote a route estimate of what an importer may charge? I might call around soon but I'm really keen on going through the process myself just see what its like...a learning experience. And No, I won't be going to Japan to inspect the car, if the pictures look good and the cabin/engine bay clean then that's good enough for me.

#@xALmoN

Who's Iron Chef?

Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7296493
Share on other sites
viper2002 Rising Star

viper2002

Posted
Posted

Have a look on J-spec's website:

http://www.j-spec.com.au

Generally, you're looking at around $2,500 for shipping + 5% import duty + 10% GST + $3,000 compliance + $700 rego + stamp duty + $1,100 importer fee. So a $7,500 car can end up costing $15,000 on the road. The costs do add up, so check if it's worth it over buying locally.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7296617
Share on other sites
Tony Olsson Mentor

Tony Olsson

Posted
Posted

I'm deciding between a R32/R33 GTR or a Mitsubishi GTO (or 3000GT whatever its called) but recently just found out pre-1996 GTO cannot be imported which rules out the pop-up headlight front end :angry:

Can anyone quote a route estimate of what an importer may charge? I might call around soon but I'm really keen on going through the process myself just see what its like...a learning experience. And No, I won't be going to Japan to inspect the car, if the pictures look good and the cabin/engine bay clean then that's good enough for me.

#@xALmoN

Who's Iron Chef?

Honestly an import broker will save you so many headaches and stress :)

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7296663
Share on other sites
(OO)SKYLINE(OO) Grand Master

(OO)SKYLINE(OO)

Posted
Posted

I'm deciding between a R32/R33 GTR or a Mitsubishi GTO (or 3000GT whatever its called) but recently just found out pre-1996 GTO cannot be imported which rules out the pop-up headlight front end :angry:

Can anyone quote a route estimate of what an importer may charge? I might call around soon but I'm really keen on going through the process myself just see what its like...a learning experience. And No, I won't be going to Japan to inspect the car, if the pictures look good and the cabin/engine bay clean then that's good enough for me.

#@xALmoN

Who's Iron Chef?

Or speak to an importer and give them the details of the car you want to bring in and see if they can do it for you.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7296856
Share on other sites
KURAUN Grand Master

KURAUN

Posted
Posted

recently I've heard of a few stories of people buying cars from Japan personally and not knowing whether they can be imported etc, pretty much bought a massive paperweight
Iron chef or j-spec would be the two companies to go through

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7297358
Share on other sites
Odium Grand Master

Odium

Posted
Posted

#@xALmoN

Who's Iron Chef?

No offence intended, but if this^ tripped you up, you do not want the headaches of entering this world without someone holding your hand every complicated step of the way...

https://www.google.com.au/?gfe_rd=cr&ei=w9mGU-eSKcKN8QeT54GIBQ#q=iron+chef+imports

  • Like 2
Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7297361
Share on other sites
theforce Community Regular

theforce

Posted
  • Author
Posted

I take it no one here has imported one themselves who could tell us about the process?

Several years ago when I was really keen on a FC RX7 I researched the import process like a Phd Thesis, pretty much got all the dots lined up. The place you buy it from in Japan normally have their own or recommended transport and so landing in at an Australian dock is no big deal. Even the paperwork to get it cleared from the docks is very doable if you plan it in advance. What I mean to say is, the process is pretty straight forward if you sit down and do the homework.

Have a look on J-spec's website:

http://www.j-spec.com.au

Generally, you're looking at around $2,500 for shipping + 5% import duty + 10% GST + $3,000 compliance + $700 rego + stamp duty + $1,100 importer fee. So a $7,500 car can end up costing $15,000 on the road. The costs do add up, so check if it's worth it over buying locally.

That's true actually, normally I just double the price in Japan to get an estimate when comparing to local cars.

No offence intended, but if this^ tripped you up, you do not want the headaches of entering this world without someone holding your hand every complicated step of the way...

https://www.google.com.au/?gfe_rd=cr&ei=w9mGU-eSKcKN8QeT54GIBQ#q=iron+chef+imports

Yeah I haven't heard of him before. If I were to buy I'd buy directly from the seller in Japan, no middle man.

recently I've heard of a few stories of people buying cars from Japan personally and not knowing whether they can be imported etc, pretty much bought a massive paperweight
Iron chef or j-spec would be the two companies to go through

That's what I mean, if you don't sit down and do the homework then you're bound for headaches, if you research the process and plan out the process, it'll be a cakewalk.

Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7297735
Share on other sites
KURAUN Grand Master

KURAUN

Posted
Posted

tbh it's more work than what the $1100-$1200 costs that the agents charge, also they have people that check out the cars in Japan which gives you a better idea of the cars condition etc as auction sheets can miss out on some things

Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7297746
Share on other sites
Tony Olsson Mentor

Tony Olsson

Posted
Posted

Going from experience with importing (other things than cars) I would again advise an import broker. But from looking at this thread it looks like you have made up your mind so I say do it and be sure to post back here on how you go :)

Link to comment
https://www.sau.com.au/forums/topic/443707-personal-import/#findComment-7297763
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Welp, good to know. Will have to wait awhile until steady hands with drills and taps are available. In other news, these just arrived! I will weigh them for posterity.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      100% the factory sender is tapered, that is how it seals (well, that and teflon paste or tape)
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      Thanks folks - I've saved a few links and I'll have to think of potential cable/adapters/buying fittings. First step will be seeing if I can turn the curren abortion of a port into something usable, then get all BSPT'y on it. I did attempt to look at the OEM sender male end to see if it IS tapered because as mentioned you should be able to tell by looking at it... well, I don't know if I can. If I had to guess it looks like *maybe* 0.25 of a mm skinnier at the bottom of the thread compared to where the thread starts. So if it is tapered it's pretty slight - Or all the examples of BSPT vs BSPP are exaggerated for effect in their taper size.
    • Duncan
      Mistakes were made, my R34 Story

      By Duncan · Posted

      Have a look at that (shitty) pic I posted. You can see AN -4 braided line coming to a -4 to 1/8 BSPT adapter, into a 1/8 BSPT T piece. The Haltech pressure sender is screwed into the long arm of the sender and factory sender (pre your pic) into the T side. You can also see the cable tie holding the whole contraption in place. Is it better than mounting the sender direct to your engine fitting......yes because it removes that vibration as the engine revs out 50 times every lap and that factory sender is pretty big. Is it necessary for you......well I've got no idea, I just don't like something important failing twice so over-engineer it to the moon!
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      Yup. You can get creative and make a sort of "bracket" with cable ties. Put 2 around the sender with a third passing underneath them strapped down against the sender. Then that third one is able to be passed through some hole at right angles to the orientation of the sender. Or some variation on the theme. Yes.... ummm, with caveats? I mean, the sender is BSP and you would likely have AN stuff on the hose, so yes, there would be the adapter you mention. But the block end will either be 1/8 NPT if that thread is still OK in there, or you can drill and tap it out to 1/4 BSP or NPT and use appropriate adapter there. As it stands, your mention of 1/8 BSPT male seems... wrong for the 1/8 NPT female it has to go into. The hose will be better, because even with the bush, the mass of the sender will be "hanging" off a hard threaded connection and will add some stress/strain to that. It might fail in the future. The hose eliminates almost all such risk - but adds in several more threaded connections to leak from! It really should be tapered, but it looks very long in that photo with no taper visible. If you have it in hand you should be able to see if it tapered or not. There technically is no possibility of a mechanical seal with a parallel male in a parallel female, so it is hard to believe that it is parallel male, but weirder things have happened. Maybe it's meant to seat on some surface when screwed in on the original installation? Anyway, at that thread size, parallel in parallel, with tape and goop, will seal just fine.
×
×
  • Create New...