Jump to content
SAU Community

Recommended Posts

Hello,

I had once bought a Ross Balancer kit from the company, i am sure many of you have heard of them as they are a local australian company, the kit came with two magnetic sensors. Now these sensors have 3 wires coming out of them but I have no idea where to stick them, as a person using a piggy back ecu there is one main confusion. Even if i plug it in the ecu wiring look should i connect it with the stock ecu or the after market?

Is there someone noted in Australia that does this on a daily basis? I am keen to learn. Omega technical factories the new owners have told me to look for someone by the name of checkered performance australia but i only find crazy results in google and facebook. Perhaps all people will also benefit from this knowledge, especially thos who cannot afford a tuner to do this. I was surprized the maker doesnt have a jedi technique on how to install the item they have on sale and I need to get in touch with someone.

I really bought it as i knew stock cam sensor is just retard as poised to die anyday, plus id love to rev past 10K, as my engine is full tomei internals and solid lifters on with 270 degree cams.post-66871-14016840030476_thumb.jpg

There is a lot of discussion on these things (Ross crank triggers) on these forums already. You could do some searching around on here and learn a lot.

Piggyback ECU setups are not going to be a pleasant thing to make work with a crank trigger system. And if you have a crank trigger (with a proper aftermarket ECU) it's generally wise to still have the cam angle sensor, or at least a modified version of it for your sync. So throwing away the Nissan CAS is not as simple as you might hope.

Checkered is not "Checkered" it is "Chequered Performance". Look for STATUS as a user on here. That's him.

Oh no guys, that was the look coz it had been with the garage guy for 2 years, he still has the car. Needs proper cleaning and need to make really organised brake lines. Not to mention these guys are arabs and they kept on doing their thing saying "its gonna look awsome just wait and see". They had it for a long while, i will definitely make improvements once i get it back.

Send Yavuz at Unigroup Engineering an email and ask him if he can give you some insight into what is going on. Whilst i am sure any reputable workshop would be able to help you, Yavuz worked with Ross Balancers to design this crank trigger so he will be able to tell you exactly what you need.

Nah boys thanks alot i just spoke to him over facebook really helpful guy i never met anyone this helpful. He figured i had the wrong parts under 5 minutes.

Edited by FalahR33

Nah boys thanks alot i just spoke to him over facebook really helpful guy i never met anyone this helpful. He figured i had the wrong parts under 5 minutes. Now next problem is will ross accept my returns and replacement or not? Never buy from a company during an acquisition. Worst mistake, or luck.

post-66871-14018465237586_thumb.jpg

Dont buy these if u run a piggy back or fcon by the way as he says.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...