Jump to content
SAU Community

Recommended Posts

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

I don't at 14psi don't get me wrong if just wanted to know what other supporting mods I need and this was the tune that came with the car I sold it to a fella who put a bigger front mount on tuned it to this and 6 months later I have brought it back

You need more supporting psi's in the manifold. :P

You can make 300 on your current turbo, your current engine. not sure what your injectors are i think you mentioned 550cc. that might be enough

wind 20psi through the stock motor on that turbo. t66 is massive by today's standard BTW.

I reckon you'll get 300 pretty easy. above 20psi and you want to do some headwork I believe but maybe you can squeeze a bit more boost on the factory valvesprings seeing as the turbo is so big.

You can make 300 on your current turbo, your current engine. not sure what your injectors are i think you mentioned 550cc. that might be enough

wind 20psi through the stock motor on that turbo. t66 is massive by today's standard BTW.

I reckon you'll get 300 pretty easy. above 20psi and you want to do some headwork I believe but maybe you can squeeze a bit more boost on the factory valvesprings seeing as the turbo is so big.

Yeah well it's on a stock exhaust manifold they just pumped the t66 on there and hoped for the best haha but when it comes on boost it comes on hard!

Okay son of rajab son of rajab this is a roller coaster.

Keep your R33 head and slap it on an RB30 bottom end.

Keep your turbo.

Buy X-Spurt 1000cc injectors.

Sell your Power FC and buy a Link/Haltech.

Keep standard intake manifold.

Keep the hot side (turbo side) all the same.

Get it tuned by a REPUTABLE tuner. Run it at 20psi and enjoy obscene amounts of power, who cares what it makes, 300kw is just a number. I guarantee you will be happy with whatever it makes.

This is the best/cheapest/easiest/least f**king about way to do what you want.

while i agree with everything here he can still use the powerfc.

out of those 2. bang for buck GT3076. but look up hypergearturbos.com and they have dyno sheets on RB25's for most of their turbos. for 300kw on P98 internally gated on the factory manifold you could probably do that with the SS2. You can do it with an R34 highflow I think too which is guaranteed direct bolt on + stock looking

TD06

GTX3071

There are plenty of others, but your choices will change my recommendations. External gate and e85 would be the most important upgrades I could suggest you do at the moment.

Do you have access to an e85 pump? Where are you located? Are the police happy to ream you after popping your bonnet? Do you have yearly RWC inspections? etc, etc.

TD06

GTX3071

There are plenty of others, but your choices will change my recommendations. External gate and e85 would be the most important upgrades I could suggest you do at the moment.

Do you have access to an e85 pump? Where are you located? Are the police happy to ream you after popping your bonnet? Do you have yearly RWC inspections? etc, etc.

No e85 on pump no sadly the best we get on pump is 98 and no yearly Rwc and cops are easy going I drove this around on my p's for nearly a year and my rb20 s13 as well not even pulled over

out of those 2. bang for buck GT3076. but look up hypergearturbos.com and they have dyno sheets on RB25's for most of their turbos. for 300kw on P98 internally gated on the factory manifold you could probably do that with the SS2. You can do it with an R34 highflow I think too which is guaranteed direct bolt on + stock looking

I'll jump on and have a look now

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • And I just realised that that advice is slightly nonsensical for a GTR, because you need 2 of them. But it is otherwise true.
    • Having had a reasonable look at the car, I'll be able to remove the (one time) rams and retract the hinge (they are held in the down location by a tiny (m3?) sacrificial screw) which will get it physically back in shape. From there if you remove the rams you need a resistor to turn off the airbag light (as Mark said, there are plug in kits and I might go that way because its reversible). And...per all the threads on here, even if you have the resistors to turn off the airbag light, the bonnet light will stay on as it writes to the airbag computer history - that is either replace the airbag controller, reprogam the EPROM (if I can work out how), or remove the globe from the dash. Having seen how sensitive this system is, if I had my time over I'd pre-emptively remove the rams, even on a road car, because this is all a very unnecessary pain in the arse. Reminds me, time to go and have a look at the Fuga too....
    • Hi, I need same this wing nismo , Does anyone have one for sale?  if any one have can contact me  00966546888343
    • Nah, lots of insurance repairs on V36 and V37 for pedestrians deployments. Reasons ranging from possums, to extremely severe potholes have deployed them. However, paying for the full repair can still be upto $5k AU some people have noted!
    • Hi, i got 1998 r34 4 door auto abs model and its manual converted with bigbox when i bought it . I successfully find the neutral and reverse light wire but can’t find the speed signal wires for speedo drive. I know its grey plug but on my loom no grey plug with 2 wires . I opened the loom upto where it getting branch with other wire, i’m amazed they is no wire. So need help how to fix the speedometer problem. I search on google it says some r34 model measure speed from diff sensor. Is it right? I talk to a wrecker he say no this isn’t right, i’m kinda stuck. Please help
×
×
  • Create New...