Jump to content
SAU Community

Recommended Posts

While rebuilding the S1 Dayz RS4, I measured the thickness of the core at 25mm. I compared it to the other RS4, the one that has the "gurgles", and was very surprised to see it was only 17mm.. Even the 25G is 25mm.

I now recall that when I was fitting the FFP I broke the top hose connection and bought a replacement radiator off the forum, never noticing the different thickness. Someone flogged me a bodgie rad. My BAD..Buyer beware. When the 25G got front shunted I used the core off the RS4 to get the rad fixed. Hence it being 25mm now. It runs cool as a cucumber.

Just maybe, the reason the 17mm Stag has the gurgles is because the rad is too thin and it boils when pushed?

Next thing is to get a Rad with a 25 plus core.

Link to comment
https://www.sau.com.au/forums/topic/444154-c34-radiator-core-thickness/
Share on other sites

  • 8 months later...

Not only an FMIC but also a tranny cooler. I had thought of putting in an oil cooler but I have a remote oil filter also and it would have been a PITA to fit. The alloy rad fixed all.

Edited by 66yostagea

S1 is quite thin (approx 15mm, same as R33 GTST IIRC)

An aftermarket koyo rad (standard construction, plastic top and bottom tanks) is thicker at about 25mm, but has fewer flutes than the stock rad, as the flutes are wider.

No idea which would flow better, could be a close call (fewer large flutes v's more smaller flutes) but surely additional thickness will improve cooling?

Y31 Cima rad is identical in width/height as the C34/R33 rad, but is double row, so a good upgrade for cheap if you can get one!

Edited by crazy86

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're going to miss not worrying about rust in the strut towers like the Skyline shitboxes out there
    • A few little updates that weren't filmed due to not taking long to do or not interesting enough for their own video. My new K&N Air Filter arrived, I went with an RU-4180 which matched the dimensions of the universal cone filter the car originally had.  The battery had gone flat, while that was charging I tidied up the spaghetti wiring at the bulk head and down the sides of the engine Next job was to swap the stereo The Kenwood harness had the female ISO plugs cut off and the male ISO plugs cut off the adaptor loom and joined with bullet connectors. I ordered in a repair loom through work and re-did it all. New Kenwood unit installed (Android Auto, DAB, Bluetooth, Reverse Camera) The bonnet/hood gas struts have been poor since collecting the car. I couldn't find any suitable replacements locally so took a chance on a pair from AliExpress.  The originals don't use a retaining clip to secure the cup onto the ball fixture, would explain why I struggled for 10-15mins trying to pry off the cups. The ball fixtures unscrew using a 12mm spanner, new ones are the same size. Sadly no photo of them fitted, you're not missing much lol The dished Momo steering wheel got replaced with my Momo Tuner, turns out I ordered counter sunk bolts for the horn trim ring (like they normally are for the steering wheel) instead of allen cap (flat seat)  A terrible photo of a Quaife style gear shift knob I've had stashed in my tool box for many years after purchasing the incorrect thread size (I can see a pattern emerging with ordering incorrect parts...) Also threw in a cup holder and a (empty) Boss Coffee can, because why not  
    • GT-R clearly the better choice! The 300 is certainly not insaly fast but has a decent amount of poke. Does a nice little drift around the corners with a decent amount of throttle. It's VERY predictable in a slide too.  Feels so progressive! People probably presume there's a 25 year old driving it based on my behaviour this week! 🤣
    • Yeah Jap import. Fairlady Z then! I'm a bit the same.  They've been on my radar for a fair while but then just impulsively decided to buy one!  Was going to just buy an NA and add turbos to it later but decided to save the f'ing around and just buy the turbo version. 
    • Thanks mate, well done to you too! Yeah not looking forward to doing any major work to it!
×
×
  • Create New...