Jump to content
SAU Community

R34 Gtt Sedan Melb

Mangune
 Share

Recommended Posts

Mangune Mentor

Mangune

Posted
Posted

Just bought a new car, so need to move the skyline on as I have no room for it to work on or to store as we are renting.

Nissan Skyline R34 Gtt Silver Sedan Auto

206xxx km Had it since 105xxx, have had for 6 years.

Some of the additions are;

3" Dump/Front pipe

3" Cat Back

Hks FMIC Return Flow

SAFC II

Aftermarket Gauges, also got stock ones to come with. Note: Boost gauge is flashing atm due to loose wire on back of gauge, easy fix.

Kenwood Double din CD player

Stock 17" turbo Wheels are on the car

Zeal Coilovers, stiff for road

Spare Rear bar supplied, as someone backed into current and did a runner. Just have not got around to changing over.

Spare Glove box

Black Automotive vinyl if interested in doing pillars

Pictures can be supplied via email or text. Just too large to upload atm, and will be taking more over the weekend.

Located S.E Melb Looking for $6,200neg

Can contact me via pm or email [email protected] with any further questions ect.

Link to comment
https://www.sau.com.au/forums/topic/444903-r34-gtt-sedan-melb/
Share on other sites
  • 3 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 gtr transmission strength, billet plate

      By GTSBoy · Posted

      Just put skinny tyres on it.
    • cosline
      R32 gtr transmission strength, billet plate

      By cosline · Posted

      Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • Piggaz
      R32 gtr transmission strength, billet plate

      By Piggaz · Posted

      You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • MBS206
      R32 GTS (RB20DE) Injectors Replacement

      By MBS206 · Posted

      Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...