Jump to content
SAU Community

Recommended Posts

Cheers, seems like I'll need some larger diameter fuel hose there then it can step down to 5/16th on the outlet end as per the standard fuel system.

Just thinking any reason I can't fit the pump to the tank directly with suitable connectors and have no hose in between? Mounting heights permitting so it's all level/no load on the fittings.

Edited by ActionDan
  • Replies 49
  • Created
  • Last Reply

Top Posters In This Topic

Question regarding the feed from the surge to the pump.

Given the feed out of the pump and into the fuel system will be 5/16 EFI fuel hose like what's already there, can the feed into the pump be the same or must it be bigger?

I ask only because that fitting is 10AN compared to the 6AN used everywhere else.

My plane was simply to buy AN to 5/16th barb fittings like these. Though I'm having trouble finding a 10AN to 5/16 barb to so I might have to go 10AN to 8AN then to 5/16.

http://www.ebay.com.au/itm/Speedflow-5-16-8mm-Barb-to-6AN-AN6-AN-6-Female-Hose-Fitting-Adapter-Push-On-/271437188344?pt=AU_Car_Parts_Accessories&hash=item3f32eaccf8&_uhb=1

And then just use something like this hose for everything and these clamps.

http://www.ebay.com.au/itm/370906965297?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

http://www.ebay.com.au/itm/160749548016?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Im using 8an fitting from surge to my 044 then the an8 5/16 barb fitting from pump to engine. Dont know about other pumps but I know 044 no issues with AN8 feed.

Can someone help me find the bloody part numbers.



Rather than use standard barbs and clamps I thought pushlock fittings would be better, but trying to find 6an to 5/16 pushlock is proving difficult, I'm waiting to hear back from Speedflow but if anyone knows let me know.



Also any idea if I can just use standard EFI fuel hose with pushlock or if it must be the specific aeroflow/speed flow pushlock hose?

Can someone help me find the bloody part numbers.

Rather than use standard barbs and clamps I thought pushlock fittings would be better, but trying to find 6an to 5/16 pushlock is proving difficult, I'm waiting to hear back from Speedflow but if anyone knows let me know.

Also any idea if I can just use standard EFI fuel hose with pushlock or if it must be the specific aeroflow/speed flow pushlock hose?

What do you mean 6an to 5/16? As in you want a 5/16 push lock end instead of barb? the pushlock ends are made specifically for those hoses as they are there own diameters made specifically for those fittings so you wont find a push lock fitting made for convential hose sizes, I wouldnt be using normal hoses on push locks. What is your reason of wanting the push locks over the normal barbs?

I simply assumed it would be a better/tighter fit than hose clamps (which I'm not super keen on - though they are used in the standard fuel system).

If there's no gain from them I'll just use standard hose and 5/16th barbs.

I simply assumed it would be a better/tighter fit than hose clamps (which I'm not super keen on - though they are used in the standard fuel system).

If there's no gain from them I'll just use standard hose and 5/16th barbs.

There is absolutely nothing wrong with the normal barbs and clamps like I said mine have been on for years and I actually could not remove the barb from the hose i had to cut the hose its that tight, imo even when I use pushons I always still put a clamp on as I still dont like to rely on a push fitting.

Potentially you could use a push on -6 fitting on 3/8 size hose as they are pretty the same dia but yeah I wouldnt recomend it.

heres a pic of my setup anyway super simple and reliable.

post-50426-0-08459600-1404800873_thumb.jpg

Edited by boostn0199

They look nicer again and a 10 pack on eBay is only a few bucks more. Might get those,

I can see they come in various sizes. Any idea what the OD is of 5/16 hose? I'm assuming the 13-15mm clamps are the go?

They look nicer again and a 10 pack on eBay is only a few bucks more. Might get those,

I can see they come in various sizes. Any idea what the OD is of 5/16 hose? I'm assuming the 13-15mm clamps are the go?

Outer diameter is 14.7mm so prob go with 14-16 or 15-17 i cant remember which ones I got. The norma sell really good quality clamps if you want good intercooler clamps you can also have a look at these I use them aswell and have never had one pop off.

http://www.norma.net.au/products/hose-clamps/norma/norma-constant-tension-hose-clamps

Outer diameter is 14.7mm so prob go with 14-16 or 15-17 i cant remember which ones I got. The norma sell really good quality clamps if you want good intercooler clamps you can also have a look at these I use them aswell and have never had one pop off.

http://www.norma.net.au/products/hose-clamps/norma/norma-constant-tension-hose-clamps

Try bumping the boost a bit, the fuel will leak past that Norma clamp eventually given enough pressure. I would be running some new 400 series push on hose at a minimum. I guess I worry about ethanol compatibility and leaks/smells inside the car more than most...

You don't like these Scott? http://www.norma.net.au/products/hose-clamps/norma/aba-small-bore-hose-clips

Given I was just going to use the Tridon ones and that's all that's on the standard fuel system (using barbs) I'm not too worried about it not sealing.

It's going to have to use a standard barb fitting at 2 points anyway, as that's what comes out /goes into of the fuel tank.

Plus where I join the surge to standard fuel lines into/out of engine, that's just standard efi fuel hose also.

Yes, but that is in the engine bay, not inside the car. Still, under the heat of the track and hot fuel, the efi hose will soften and the clamp isn't spring loaded to take up the slack. I guess you don't worry about things like that until it happens to you.

Im not sure about your car, but mine get's pretty hot in the engine bay, yet to see a clamp come loose, not bad for original clamps on a 25yr old car :D

I understand what you're saying, I just don't feel that it's as much of a factor for me on a car that only does a few thousand k's a year at most and gets very regular eyes on it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Fark what are the changes of that snapping like that, clean. Nek minnit, custom radiator goes in, with built in oil cooler like those discontinued PWR ones from yesterdeacades ago
    • I thought I'd do a write up on an auto transmission fluid change for a the nissan 7 speed Automatic. At some stage the genius engineers decided that the fluid in the trans was "for the life of the transmission", (which seems kind of self supporting to me) and removed the dip stick and fill tube (funnily enough there is still a casting for it). Anyway, for this job you do need 2 specialist tools in addition to regular hand tools, jack and good chassis stands. You need a way to pump fluid up to the transmission; I got one of these but there are plenty of other options: https://www.ebay.com.au/itm/364584087070 Don't trust the generic listing though, it does not come with the required adapter for the Nissan 7 Speed. You need one of these, can't do the job without it: https://navarapart.com.au/product/genuine-nissan-patrol-y62-d23-np300-navara-re7-dipstick-fill-connector1 You need a heap of compatible transmission oil. Could be Nissan, could be anything else rated for Nissan Matic S. You need at least 10 litres, I had 15 to give it a better flush... Also, you need some biiig oil catch trays, at least one of these, or bigger if possible (volume was fine, size was very marginal): https://autobarn.com.au/ab/Autobarn-Category/Tools-%26-Garage/Specialty-Tools/Oil-Service/Garage-Tough-Oil-Drain-Pan-Black-16L---GT1068/p/TO03191 Finally, a measuring jug is very useful if your pump does not have volumes marked on it, I got a 6l one: https://www.repco.com.au/oils-fluids/fluid-accessories/measuring-jugs/penrite-measuring-jug-6l-pmj006/p/A5322648 Oh, and gloves.....this stuff is horrible (not as bad as diff oil, but getting there) ....First, jack up your car.....
    • So I mentioned the apprentice, @LachyK helped take the bonnet off. We just undid the nuts on the hinges and unclipped the gas struts, then pulled the bonnet back a little as the front was catching on the front bar.  I had a good look at everything today and have removed the rams, repaired/reset the hinges and bolted it back together like it never happened. I'll do a separate write up on the repair, and I also removed the poppers from the Fuga today too to save grief down the road.....as said above it is at least $5k to repair retail. I'm also happier about my ability to prepare a race car, and less happy about Nis-nault's engineering (I can hear @GTSBoy sAfrican Americaning) because the top hose of the radiator didn't slip off.......it snapped clean off. By practice I put the hose clamp hard up against the flare on a neck to make it least likely to ever move (thanks @Neil!). I guess that puts a little more pressure on the end of the pipe as it is further away from the rad, but still, that is pretty shit. I've put it back on for now as there was a fair bit of neck still there, but obviously there is no lip on the neck any more so I don't think I'll track it again until I have a new rad. Speaking of which....more research required. It looks like Koyo makes a standard size radiator in ally which I'll grab in the meantime, but I really want something thicker so might have to go custom in the medium term (ouch) Coolant still needs a refill and I have the pressure tester on it over night, but other than a wash down of the engine bay it seems alright. And @MBS206 noted something noisy on the front of the engine and I think I agree....time for a new accessory belt and tensioners I think.
    • our good friends at nismo make a diff for it, I have one (and a spare housing to put the centre in) on the way. https://www.nismo.co.jp/products/web_catalogue/lsd/mechanical_lsd_v37.html AMS also make a helical one, but I prefer mechanical for track use in 2wd (I do run a quaife in the front, but not rear of the R32)
×
×
  • Create New...