Jump to content
SAU Community

Recommended Posts

Well, apparently R33 stuff fits straight in. IT DOESN'T. The springs in the rear are wider on the R33, so won't fit back over the stock struts and under the strut cap. I'm unsure whether you can change to the R33 struts as well, which of course would fix this problem, but the rear springs from an R33 are not the same as those in the C34 Stagea. Fronts are not a problem though :thumbsup:

 

Gary bought Kings Springs, straight from Kings I believe.

Sounds like R34 springs, they are smaller diameter coils than R33. I am not going to change the springs on ours, unless I find them too soft. I will simply lower it with the circlip height on the Konis. The question now is R33 or R34 shocks? :confused:

  • Replies 99
  • Created
  • Last Reply

Top Posters In This Topic

Stagea insured for $20K with NRMA was $2.4K, for me.  I have 4 cars insured with them, all on 65% NCB, house and contents policies, 4 geenslip policies etc.  Guess who is not going to get my Stagea insurance? :wassup:  

Thanks for the tips guys, I emailed off a quote request to Shannons yesterday.  Just Cars will get a call today.    :thumbsup:

Have you suggested to them that you will be taking all your insurance to whoever insures the Stagea for the most reasonable cost?? :D

Stagea insured for $20K with NRMA was $2.4K, for me.  I have 4 cars insured with them, all on 65% NCB, house and contents policies, 4 geenslip policies etc.  Guess who is not going to get my Stagea insurance? :wassup:  

Thanks for the tips guys, I emailed off a quote request to Shannons yesterday.  Just Cars will get a call today.    :thumbsup:

2.4k @ $20k is horrid..i was quoted $2400 @ 50k for 260rs at famous 60% no one under 30driver .sat track alarm ...i thought this was two much ...but the good old NRMA can make anything look a bargain

My Stagea is currently on a ship from Japan.

I can't wait as I've been in little N/A silvia for way too long.

I already have 18" white Nismio rims to put on it + BOV and Striaght pipe exhaust. Does anyone knoe if R-34 Nismo suspension will fit?

Have been told many conflicting stories about this.

Mine is getting a AUtech Kit from AJM motorsport and is getting resprayed black. Also is leather with twin sunroofs.

And big sound system soon to follow. :wassup:

for the suspension, front is exactly the same as 33 gtst but the rears are a different story.  I sourced my new suspension of an Autech RS 260.... get it back tomorrow will let you know how it handles..

Cheers

Gary

Hi Gary, what is the rear like, R32 GTR I heard was pretty close? Did you keep your standard shocks?

GTR is all different the hub is different therefore the bottom of the shock is different. You can change hub carriers and then it should fit. The easiest way is to modify the top hat of the shock.. I had Kings springs make the rear springs but the front are just lowered, heavy duty 33 gtst off the shelf items. Standard shocks are gone, replaced with Autech

Cheers

Gary

P.S Don't try the manual conversion yourself.......What a nightmare!!!

Hey all,

I have recently purchased a RS4 due to baby one the way. Sold my heavily modded 32 gts4 but am very happy with the new toy. Have got Tein S springs to drop her a little, gtr fmic, exhaust, boost guage timer etc etc. Might have a go at the group buy for the stainless mainfold too. Tein springs are ex Japan only (correct type for 4wd staj's), if any one is interested I can organise some more, $350 inc gst + ship. Will post photos when car is done. Nailed a VY SS commode off the line up to 100kph, mate did he have the shits. hahahahah.

Cheers,

Ken

Wife got a 33 turbo 4 door. (no point is going backwards is there)

Had my stagea since Feb

Bought it fully complied, I was wondering about the NEO version, but went

for the 1997 RS4. Looks great, dual sunroofs/blue.

Just cars gave me a $990 per annum deal, but I have got

a good record (rating, no accident claims for years and years etc, and over 40)

My insurance is through Shannons. I pay $550 per year full comp. Insured for $22k. I think i got a good deal due to my last car r32 gtst4 and my gtr race car was insured with them. Got my wifes 33 turbo 4 door insured for $530 per year. Give them a call.

Ken

Hey Gary,

You wouldn't happen to know anyone else who has any autech suspension and what price i'd be looking at?

How much did king springs charge you for that setup. How much did it lower the car?

I wish the manual conversion was easier! That will be the only thing i'll miss about my lil' silvia...

Can't wait til mine is done!!! Arrives on the 30th but straight to compliance GRRRR. And then the transformation begins from family wagon to V8 EATER.

My insurance is through Shannons. I pay $550 per year full comp. Insured for $22k. I think i got a good deal due to my last car r32 gtst4 and my gtr race car was insured with them. Got my wifes 33 turbo 4 door insured for $530 per year. Give them a call.

Ken

Shoot that must be a "Darwin" price, "Sydney" price is double that. I will give them a call back and ask whether that's the case.

Shoot that must be a "Darwin" price, "Sydney" price is double that.  I will give them a call back and ask whether that's the case.

Yep, it was a "Darwin" price, less accidents and lots less chance of getting it stolen, so cheaper insurance. So far Shannons wins at $1.2K with $400 excess, Just Car second at $1.3K with $1.2K excess, NRMA last at $2.4K. :P

Yep, it was a "Darwin" price, less accidents and lots less chance of getting it stolen, so cheaper insurance.  So far Shannons wins at $1.2K with $400 excess, Just Car second at $1.3K with $1.2K excess, NRMA last at $2.4K. :)

97 260RS @ $50;000 insured w Just Car $2887 60% nc no driver under 30, sydney

  • 2 weeks later...
Yep, it was a "Darwin" price, less accidents and lots less chance of getting it stolen, so cheaper insurance.  So far Shannons wins at $1.2K with $400 excess, Just Car second at $1.3K with $1.2K excess, NRMA last at $2.4K. :D

"Darwin price" - hahahahahha.

Got to be kidding. Open speed limit, no local approved panel beating wshops for imports. Guys, cars cost a heap to insure up here. The major problem is getting a company to insure the imports in the first place. I have got a good deal through previous business done with Shannons, thats it.

Masa kit Primo? Looks like a winner.

Ken

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Johnny is sad now... Because you didn't get Bosch Motorsport ABS.  
    • Hey keep the ideas coming, I'm always keen on projects! But, problem fixed!  I got a cheapie ozito scope from Bunnings and had a good look in and around the bearing and sensor hole. I couldn't see a smoking gun but the bearing looked a bit strange, especially when comparing with a new one. I thought the cover had come off the bearing magnets.  Sorry for pics of a screen, I didn't have an SD card.     Good thing I had the old one to inspect. So, given I'm like a pit crew with wheel bearings and luckily I had a spare bearing because I f**ked up my parts order, I decided to just smash it out. Got the old one out in about an hour. So much easier when the parts haven't had a chance to rust together yet. 😂 And, well, found the problem.    In the second pic at about the 8 o'clock position, you'll see what I think is the tip of the old sensor.  The new sensor has definitely been rubbing but it's all intact, just a little shiny so I'm hoping it's fine.  The car brakes perfectly now and no errors.  I think the job took about 2.5h in the end. 👍🏻 I really appreciate the help in here as usual. Thanks guys.
    • I was only looking because I saw some drops on the ground but it wasn't alot. Recently had it serviced will ask the mech to confirm. Find it strange that it looks standard though, can see in another photo of a random box 
    • So...not sure if you know if that has always been there or why you went looking. It could be old damage from a clutch explosion, or even just the gearbox got dropped somewhere along the line. Basically, you should seal it up to stop oil and dust getting into the bellhousing, but it doesn't matter too much and is not structural. I'd suggest something like a glob of JB Weld. BTW what gearbox oil are you running, I would guess the breather has been spewing it everywhere.
    • Hey Duncan thanks for your reply. Sorry mate I know the photos are shit.  Took another photo for reference. Seems the casing does have a hole in it looking on the net, fluid seeping out. Added a photo   
×
×
  • Create New...