Jump to content
SAU Community

Recommended Posts

Hi All,

Need your help with this one. I am looking to buy a Slyline 370 SP and have shortlisted a couple of cars with Jap Auto World & Nagoya Motors(Have a time & finance constraint, hence can't import). My questions are:

  • Has anyone had any good / bad experiences with any of the above dealers.
  • One of them has sent me the Dereg papers for the car. Can you please let me know if there is anything obviously wrong with this.
  • I am planning to get an NRMA inspection done on the car I select. Anything else I should be doing?

Thanks

post-135578-0-35437000-1405428151_thumb.jpg

I got my stagea from nagoya motors and have had no problems with them I found Alexi to be very helpful even got different tyres put on the car for me as the ones on the car were a brand I wasn't familiar with at not cost haven't had any issues with then even after the car died after shopping one day as the battery was old he sorted towing and a replacement battery very helpful I will highly recommend them. Happy shopping mate.

Doesn't look like a dereg Certs, but an export cert, simply posting the details I'd the car as it was shipped.

A dereg will state two different dates and the recorded mileage at the points.

Why not use one of the jap history check companies to find the auction papers and Certs, it's a small price to pay for the investment of a car.

So, the car was travelling 12,733kms per year on average for the first 3 years of it's life. According to RAWS that car was imported in April 2013 (http://raws.infrastructure.gov.au/rawswebpublic/RAWPubVehSearch.asp), implying it spent at least another two years in Japan after March 2011.

The dealer is asking you to believe that in those two years, the car suddenly only travelled 3,800kms.

Did you try asking the dealer for the auction papers?

Edited by dodgyimports

Don't bother with an NRMA check - generally RAA/NRMA are freaking useless with imports. Take it to your nearest import specialist/workshop and get them to look it over.

And as dodgy said above, get the auction papers. Something sounds fishy. Don't trust a car salesman as far as you can kick them. And don't believe them about any implied or specific warranty - they are not worth the paper they are printed on.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Impossible to remove the housing while turbo is installed on the manifold on the engine. So I have to do it anyways. I plugged it so there will not be any debris in there. Will vacuum aswell 
    • would a r34 gtr hood line up with gt/gtt stock fenders? after latch, front bumper and hinges are swapped for gtr ones? or would the fenders be too low or high in relation to the hood surface? ( I believe seeing somewhere that gtr front fenders use some type of riser for the sides, but do not know how that relates to stock gt/gtt fenders.)    
    • You just need to remove the compressor housing, not the entire turbo. I would not be drilling and tapping anything with the housing still on anyways. 
    • So, I put my boat on a boat. First of all, I'm going to come out and say it. Why is Tasmania not considered a holy goal, an apex that all road-legal modified cars go to, to experience? This place is an absolute wonderland of titanic proportions. If people are already getting club runs for once in a lifetime 30 person cruises to Tassy then I've never seemed to see it. It is like someone replaced the entire place with an idyllic wonderland for cars, and all of the people living there with paid actors who are kind, humble, and friendly. Dear god. After doing a lap of almost all of the place I've found that it's a great way to find out all of the little things that the car isn't doing quite right and a great way to figure it all out. All in all, I drove for 4 hours a day for a week and nothing broke. I didn't even need to open the engine bay. This is by all means a great success, but it has left me with a list of things to potentially address. I also now have a 3D printed wheel fitment tool which annoyingly hasn't got any threads in it to actually assemble it. I might be able to tape it together to check the sizing I actually want to use, but it'll likely involving pulling the shocks out to properly measure travel at least at the front, and probably raise the car while I'm at it, at least in the rear. I scraped on quite a few things and I'm not sure how else to go about it. I was taking anything with a bump at what felt like 89 degree angles. And address those 10 other tasks. And wash the car. God damn it is dirty. And somehow, the weather was perfect the entire time - And because I was on the top of Mt Wellington it turns out it was very much about to freeze up there. I did something I typically never do and took some photos up there in what must have been -10 and the foggy felt like suspended ice, rather than mere fog. If you own a car in Australia, you owe it to yourself to do it.
    • Damn that was hilarious, and a bit embarrassing for skylines in general 😂 vintage car life ey. That R33 really stomped. Pretty entertaining stuff
×
×
  • Create New...