Jump to content
SAU Community

Recommended Posts

On my way to work this morning I got hit with some school traffic and decided to find an alternate route, and I found a cracker of a road (even if it is only a short one).

The road was a bit wet this morning from some light showers overnight, and with some multiple surfaces it creates some unexpected surprises.

Please note that this review is taken within legal road limits. I do not encourage 'hooning' or performing illegal acts on public roads. Please respect the road rules at all times and take note of advised speeds (marked in yellow) before making your own judgement.




Protheroe Rd - Forgan Rd, Cashmere (Speed Limit: 80kph)

When heading from Protheroe Road, the first left hander (40kph) is slightly banked and has an open rough asphalt surface. The apex of the corner doesn't have much grip when wet, so be careful not to hit it too quickly. As the road opens you get a nice high speed winding section up to the top of the hill before a set of blind esses (50kph) dropping down a 16% grade. The esses tighten and open up again, but be careful not to tackle too quickly as there is a solid concrete gutter on the outside that's going to make a mess of your rims if you come over the crest with too much speed. As you arrive at the end of the road keep to the inside line - the road narrows over a blind crest with loose gravel on the side of the road.

28aeff6638a891774ce3f00621274455.png


If you have any good cruise roads please share them. I'll endeavour to keep updating this first post with your favourite roads to make it easy for everyone to find them.

Edited by Simink
Link to comment
https://www.sau.com.au/forums/topic/445962-good-cruise-roads-in-se-qld/
Share on other sites

I drive this section of road regularly, it's ok but there are much more fun roads around ;)

Haha, yeh definitely. Wouldn't go out of my way to sight this one, just an alternative to boring ol' Youngs Crossing! Thought it might be a good idea to start sharing these by starting with a nice little one to gauge interest.

Be good to eventually pull a map together of good drives that we can link up. My brothers and father are really into bikes. They have an awesome layout they go cruising on throughout the Sunshine Coast hinterland. I'll try to map it out sometime. It's at least a 90min loop.

The ultimate cruising road would have to my the Mt Lindsey highway through the bellbird ranges, between Rathdowne and the Kyogle turnoff (following road toKyogle isn't bad either). A lot of people take the Lions road instsead, but honestly i think the main road is better.

The road from Kyogle back to the coast isn't a bad drive either, but last i was there the surface was terrible.

Its a long way from anything though.

Thanks Pete, I'll add it :)




Mount Lindesay Highway, Rathdowney - Lindesay Creek
Submitted by 'sneakey pete'

The ultimate cruising road would have to be the Mt Lindesay Highway through the Bellbird Ranges, between Rathdowney and the Kyogle turnoff (following road to Kyogle isn't bad either). A lot of people take the Lions Road instead, but honestly I think the main road is better.

7de6868835071f1529e5d2302463735f.png

Thanks Cadmoon, that one looks like a cracker! I'll add it (with a finishing touch from Mount Mee into Dayboro - been on that drive before, it's pretty nice)




The Gap - Mount Nebo - Mount Glorious - Kilcoy - Woodford - Mount Mee - Dayboro
Submitted by 'Cadmoon'

Mt Nebo, Mt Glorious, out to Kilcoy then back via Woodford and Mt Mee...

e9757bb3cb456bf571db9e5e46221d5c.png

Edited by Simink

This is the better version of this road, starts at the bottom of Mt Nebo

Cheers. Updated using Google Maps Engine. Anyone using Google Maps on their phone should be able to save it as a GPS route.

Here's a loop I'm going to check out this weekend up in the Sunshine Coast Hinterland. If you're ever doing a cruise up that way I highly recommend planning a stop at the Mary Cairncross Cafe, especially on early morning winter drives. They do massive awesome breakfasts, and have a big fireplace burning in the middle of the cafe. Toasty! Been up there a few times when it's been wet and the mist looks amazing. Would make for some good photo ops.

Sunshine Coast Hinterland loop

8988d6d2a07239e73546ada053bdbebe.png

These link open up nicely in Google Maps app, but how to do save the Map.

I'll have to convert the others to a Maps Engine Map, but you should be able to download 'Maps Engine' app for your phone, log in to your Google account and load a saved map, then hit Directions to start navigation.

To create maps for the Maps Engine go to https://www.google.com/maps/myplaces, create a map, then save it.

Let me know if you can save the Mt Nebo route to your own maps, if not I'll have to set the permissions to allow everyone to edit them.

  • 3 weeks later...

Yes, many many goods roads are up out north east of Brisbane. Be careful though as motorbikes, police and trucks can appear so always keep well within the limits and on your side of the road.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nah, OEM washer bottle and brake fluid reservoirs are fine I don't know what it is with the plastic that Mazda used, some plastics, like the washer bottle and brake fluid res are fine, and still look new after 20 years use, where as the coolant expansion tank, and PS reservoir, that I replaced with new OEM items when I first got the car, turned yellow and started getting brittle a few years later If the dirty yellow stained plastics didn't trigger me there wouldn't be an issue, but they did, much like the battery bracket....... Meh As for going back to work full time to support car stuff, nope, why, because I own a Mazda NC MX5, not a Nissan R series Skyline 🤣
    • I've never heard of CJ-motor, so can't advise you on them. I'd just go straight to GCG for a GCG highflow though. Seems no point to use a middleman. I'm somewhat surprised that the price on the CJ site is lower than the GCG retail price. Even though CJ would get a discount of some sort, you would hardly expect them to give up so much margin. Maybe the price is out of date? Having said that "I'd go to GCG"...when I did my highflow, I went to Hypergear. I did this https://hypergearturbos.com/product/rb25dethighflow/#tab-dyno-results with the R34 OP6 450HP profile. With the BB centre (extra $400) and intially with the standard boost actuator, but I eventually got him to send me the high pressure one when I got to the point of being able to actually use it. Ends up costing the same sort of money as the GCG highflow, but this is, of course, the turbo that I KNOW has a shorter length core and so moves the comp cover rearwards. The GCG apparently doesn't do that. My mechanic also swears by the GCG highflow, given that we have another turbo rebuilder who does something essentialy the same as theirs, using Garrett wheels. He says it stands up at really low revs and makes good power. I haven't pushed my HG highflow past ~240-250rwkW yet (should have a little more in it, but unclear how much) and it does have a fairly gentle boost ramp. OK, it's much better now that I have gotten my boost controller tuned up on it.  A lot of my earlier unhappiness was because I couldn't keep the wastegate flap as closed as it needed to be (including some mechanical issues). I'd still prefer it to boost up nearly as quickly as the stocker, and it certainly a bit slower than that. So maybe the GCG one is worth the first look (for you).
    • Ok thanks 🙂 I will higly consider this. Any "known" company for a good reviews and experience to send that off? Is that CJ-motor good one? Or go straight to GCG site? I need to use VPN to even find some of those "shops" let alone access them 🙂 
    • You can literally put in as much WMI as it takes to quench the combustion totally (and then back it off a little, obviously), and it will keep making more and more power. The power comes from the cooling effect of the water (and the meth) and the extra fuel (the meth, which also has massive octane). It is effectively exactly like running E85. One might be slightly better than the other, but they are damn close. But with either you can lean on the boost or the timing (or both) waaaay more than with just petrol and the results are similar. Here's the first thing I googled for an anecdotal bit of evidence. Can't access the attachment without being a gold member, but it is there for the getting if able to, or searched up elsewise perhaps. https://www.hpacademy.com/forum/general-tuning-discussion/show/wmi-vs-e85/
    • Dang, those BBS are so nice! 
×
×
  • Create New...