Jump to content
SAU Community

Hsd Coilovers Help

suwidji
 Share

Recommended Posts

suwidji Experienced

suwidji

Posted
Posted (edited)

Hey guys,

I hit up streettotrack.com about BC BR coilovers (for r34 gtt) but they no longer stock them and have recommended the HSD DT coilovers.

Can someone shed some light on these, preferrably those who are using/have used them, as I'm not too familiar with them.

Are they good for street/track use and are they equivalent to the BC BR's?

Edited by suwidji
Link to comment
https://www.sau.com.au/forums/topic/446375-hsd-coilovers-help/
Share on other sites
Scott Black Rising Star

Scott Black

Posted
Posted

ive got a set for my 180sx with an rb25 yet dont know how they go as yet to install, yet the dualtech series are a twin tube shock istead on monotube, ment to be a less harsh ride on the road, yet less suited for track use. hsd also do a more expensive monotube shock (the dts retail around the 1k mark, or for about 1.3k the monotube hsd) you can also get them from wholesale suspention, who would be happy to talk to you about the differences.

AMR33 Mentor

AMR33

Posted
Posted

Had some adjustable HSDs on S13 Silvia a few years back. Can be harsh (as in stiff) on road but I found them to be quite good. HSD is a relatively well known brand in the field. I think HSD equivalent to whatever BC set you were going to by will be just as good if not better.

My 2c

Cheers

Amir

sweefu Mentor

sweefu

Posted
Posted

Had some adjustable HSDs on S13 Silvia a few years back. Can be harsh (as in stiff) on road but I found them to be quite good. HSD is a relatively well known brand in the field. I think HSD equivalent to whatever BC set you were going to by will be just as good if not better.

My 2c

Cheers

Amir

The DT (as above, twin tube) should be less harsh than the monotube dampers, from my experience the monotubes are quite harshly valved and perform much better on the track than street.

  • 2 weeks later...
LTHLRB Grand Master

LTHLRB

Posted
Posted

ISC coilovers are a good bang for buck set. you can also choose your own spring rates when ordering. i have 8/6kg springs in the r33 and its a pretty sweet ride considering how the car goes full noise on the race track, street driving isnt harsh at all

AMR33 Mentor

AMR33

Posted
Posted

ISC coilovers are a good bang for buck set. you can also choose your own spring rates when ordering. i have 8/6kg springs in the r33 and its a pretty sweet ride considering how the car goes full noise on the race track, street driving isnt harsh at all

Im glad yo said that mate. Im in the process of setting my car up for track. Currently has JIC coilovers on it but might upgrade later on and get some with camber adjustment etc. So 8kg front and 6kg rear?

Cheers

LTHLRB Grand Master

LTHLRB

Posted
Posted

yeah mate, thats a drift kind of setup with those spring rates, but its a good combo if you have a street car that likes to go sideways from time to time... a full on circuit car would have heavier spring rates but then it becomes too much on the street if you like to live a life of luxury

AMR33 Mentor

AMR33

Posted
Posted

yeah mate, thats a drift kind of setup with those spring rates, but its a good combo if you have a street car that likes to go sideways from time to time... a full on circuit car would have heavier spring rates but then it becomes too much on the street if you like to live a life of luxury

What spring rate do you think would be good for circuit car? Not too fussed if its bumpy or stiff on the road as I dont plan to drive it on the road too often; its mainly going to be for track

Cheers

Amir

sweefu Mentor

sweefu

Posted
Posted

You can change the spring rate on all coilovers.
Especially easy on the generic models such as HSD, BC etc

If you buy HSD from the Aus distributor you can choose your spring rates, I'm sure it would be the same for BC

Otherwise springs are generally $100/pair up to ~12kg or so, then a little more expensive.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The king 2.0
      Nissan fuga 450gt android screen

      By The king 2.0 · Posted

      Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • MBS206
      NC MX5

      By MBS206 · Posted

      My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • dbm7
      Automatic Power Button Light Flashing

      By dbm7 · Posted

      Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • The Bogan
      NC MX5

      By The Bogan · Posted

      Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Duncan
      R34 Plug Identification

      By Duncan · Posted

      Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...