Jump to content
SAU Community

Recommended Posts

It is not "better" and "more tunable".

Air flow meters measure the load directly. They are therefore actually a better way to measure load. They do have a few problems though, particularly with big turbo cars. These being a few age/reliability/dirtiness issues but mainly reversion from poor turbo intake design/execution. Particularly poor design/execution of the BOV return.

MAP sensors do not measure load directly. You need air temperature and a few other things (including engine speed) to work out what the load is from manifold vacuum. You also need to have a "model" of the engine's volumetric efficiency. In reality no-one has that model so MAP sensored ECUs are tuned using the engine as the model - ie you just add and subtract fuel to get the mixture right. That might sound trivial and normal, but in reality, if you then change something about the engine (say a freer flowing exhaust or something else that affects the VE of the engine) then you actually change the relationship between manifold vacuum and load, and hence the tuning changes. Might not be much, might be bad. This is why famously you couldn't just put bigger cams into many MAP sensored engines without them cracking the shits at you. You can do it with an AFM engine and it will probably still need a tune to get it really nice, but it will still get the fuelling pretty much right without much help.

So the choice between MAP and AFM for PFC tuning on Nissans is really one of taste and capability and what your plans for further mods might entail.

  • Like 1

gtr jet what would you suggest?

I'm only going with pfc because they're proven and the price suits me, I'm not willing to go all out on a haltech or anything like that, way too expensive for the power I'm chasing.

That's some good information GTSBoy, I'll keep it in mind, I'm really not sure what direction to take my car yet...

I was going to say a Haltech but they are a little on the pricey side. I run a PFC and it does what I need but if I had the money I'd upgrade.

If money is an issue then just stick with a normal PFC and grab a Z32 AFM.

AFM gives a 0-5v reading to the Ecu based on airflow (duh)

The z32 gives better resolution for higher airflow. The factory r33 Afms hit a 5v wall at around 220rwkw worth of airflow. The z32s go much higher, around 550 crank hp according to nistune

Where did you get the 400rwkw number from?

Is it a track car? because if its mainly street driven, you'd be better off running a little less power to make it more driveable

The D-Jetro makes it easier to setup intake pipes, run no/atmo bov etc. But as GTSBoy has said, the MAP sensor calculates airflow, where as a MAF actually measures airflow.

I'd suggest looking into a Link or Vipec. They will end up costing more then the Power FC but offer far more features and options for tuning. Keep in mind that this will mean you will have to change to MAP sensor (although not that bad, they have an inbuilt MAP sensor to get you started) and its suggested that you install an air temp sensor as well, which means you will need to fit it into the intake manifold or a cooler pipe near the throttle body. These arent major issues but worth noting. There will also be a small amount of wiring involved, but nothing to complicated

EDIT: The adaptronic as mentioned above I have heard some good things about, but having never used one I can't give any more advice then that

Edited by 89CAL

To put things in perspective.

D Jetro is worth say $1000? What's it gonna cost to pull the intake off, drill cylinder 3 and 4 runners for the MAP sensors positions and put it all back together. Let's call it $3-400.

L Jetro. Cost of ecu itself is $700 second hand. IF you need Nismo AFM's, let's call that $500 second hand or $700 new.

That's $1,400 either way

A Link G4 would be something around the $1,800 zone. No drilling, far more advanced ecu, can support things like ethanol sensors if you need it later on. (Never say never)

All of a sudden the old dinosaur FC isn't such "value for money" anymore.

  • Like 1

the power fc is fine...but the cons with the powerfc is that it doesn't have on board logging....but you have the handy controller which allows making changes without laptop, they are easy for tuners to tune.

...

just think about what your end goal with your car is....what GTSboy said is spot on...the MAFless ecu's take more time to tune properly as you have to do corrections that a MAF system will automatically do for you....

FWIW i started learning with a Powerfc and now i kinda wish i had a Link G4....hindsight is 20/20 if you can be patient and save the money then a link or equivalent that allows retention of MAF would be the way to go IMO.

I didn't realise 400rwkw was a lot, guess they're only 2.5ltrs, I've just come from the world of xr6t's where a reliable 400rwkw is less than 5k away lol.

I still have much to learn about skylines.

I might look into the link g4, ethanol is another thing I've put into the future and being able to run a flex sensor would be good.

Thanks for all the info guys.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...