Jump to content
SAU Community

Installing High Impedance Injectors In Gtr

ethan

By ethan,
in Engines & Forced Induction

 Share

Recommended Posts

ethan Enthusiast

ethan

Posted
Posted

hey guys,

Before you ask i have searched for this heaps and cant find an answer,

I have a R32 gtr with a vipec ecu, How do i go about installing the ID1300 i have bought and they are high impedance and stock gtr injectors are low... as far as im aware.

I have heard about connecting all the wires and removing the resistor but i cant find the resistor and wont this cause all the injectors to fire at the same time wasting alot of fuel?

Cheers

Ethan

Ben C34 Grand Master

Ben C34

Posted
Posted

Well seeing as you will have to get it tuned why not ask your tuner?

And no it won't make all injectors fire at once. That would be a silly thing to do that no one would do.

Ben C34 Grand Master

Ben C34

Posted
Posted

yeah is sounded silly,

yeah ill ask my tuner, thought there might be an easy fix i just didnt know

Getting rid of the resistor pack is easy. But to be sure ask your tuner and he will have you sorted in a minute.

jiffo Mentor

jiffo

Posted
Posted

I think I see what you're asking.

The system runs a 12V positive feed to the resistor bank and from that bank, 6-individual feeds head off, one to each injector.

The injectors are fired by the ecu grounding each injector.

Joining all 6-feeds to that 12V positive and removing the resistor bank, you're setting it up the same as a high impedance Rb20.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • JC71
      gauge needle removal

      By JC71 · Posted

      I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Roy
      A Boy's Love For His Rb20

      By Roy · Posted

      Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • GTSBoy
      gauge needle removal

      By GTSBoy · Posted

      Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • GTSBoy
      Wheel refurb?

      By GTSBoy · Posted

      Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • GTSBoy
      R-chassis INNER tie rod torque spec?

      By GTSBoy · Posted

      Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...