Jump to content
SAU Community

Recommended Posts

ok well i lost my car keys 2 days ago. and ive pretty much given up looking for them... but i dont have a spare key and the car is stuck at my cousins house

what can i do? can i get a key moulded to my current lock? or do i have to get a new one???

this has been pissing me off all weekend! does anyone have any ideas?

First get into the car, maybe a coathanger ? Then remove one of the doorlocks and take it to a locksmith on Monday.

He will be able to dismantle the lock and measure the pins. From this he will be able to make you a key. If it works, get several made !

Hide a spare key somewhere under the car where it cannot be seen. Or maybe bolt a spare key behind the numberplate or something.

Then one day when you loose your keys at 4AM, out in the middle of nowhere, in the pissing rain, with no money in your pocket, you will be o/k !

i know what its like. I sorta did the same thing. Was on holiday in Byron Bay and couldnt find the keys anywhere on the day we were meant to leave.

Lucky wrx's are easy to break into, so we managed to pack the car, go to the pub and forget about it.

Found the keys 2 days later in one of the girls handbags.... felt stupid, but we got 2 extra days of holiday!

Originally posted by Dragon18

if you lose your keys that means u cant start your car anywayz coz

of the immobiliser and alaram hehe

hehe just do what my dad does (being the extra cautious Camry driver he is :D )

he's got a key and a spare remote for the security system tucked away up in one of the bumpers. It's tied up with heaps of wire so it can't come loose and it's in a sealed plastic bag so that no water or dirt gets in.. :D

Well I also have an alarm/immobiliser and steering wheel lock. Both front doorlocks are disconnected so a thief cannot twist the locks around with a large screwdriver. That is how I lost my last car.

If I lose my keys, or the battery in the remote goes flat, my system is as follows.

Get the spare key from under the car, get into the rear boot. Inside the boot I have a spre remote for the alarm to gain entry, and a spare key for the steering wheel lock.

Originally posted by Warpspeed

If I lose my keys, or the battery in the remote goes flat, my system is as follows.

Get the spare key from under the car, get into the rear boot. Inside the boot I have a spre remote for the alarm to gain entry, and a spare key for the steering wheel lock.

Just make sure the battery is replaced every now and then! It would be so frustrating to find the spare remote wasnt working. I was stuck for a while in Chadstone late one night after a movie when my immobiliser battery died... I pulled the battery out and twisted it around and luckily it somehow had enough power to work so I could start the car.

Originally posted by Warpspeed

Hide a spare key ...  behind the numberplate or something.  

I did that once. One problem - the screwdriver to undo the number plate was in the boot - which required the key behind number plate to open it!!!!!

With regard to the alams and immobilisers - most immobilisers simply intercept the wire to the starter motor, they don't actually disable the car (all the lights on the panel light up, just the starter won't work. Solution (for manuals only) - kick start down a hill!!!! And the alarm should have some means to disable it without the module.

Bolting the key behind the numberplate was used as an example to get people thinking, but I have actually done this myself though.

If you use a stainless steel screw and a brass nut, with a shakeprook star washer, it will not vibrate loose. It will not rust up either. By twisting the key, the nut can be loosened quite easily. Try it and see ! Or maybe a brass wing nut.

Another way is to attatch a long piece of stiff wire to the key and poke the key down inside a chasis rail, gearbox crossmember, behind the front grille, inside a hollow towbar, or something. If you can feel the end of the wire with your fingers, then pull the whole lot out.

Use your imagination. Suerly you can find a place that does not require a full 250 piece toolset on a trolly to get at the key. Jeeeeez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...