Jump to content
SAU Community

I Am a Retard (can someone please help me!)

adam 32

By adam 32,
in General Automotive Discussion

 Share

Recommended Posts

adam 32 Grand Master

adam 32

Posted
Posted

ok well i lost my car keys 2 days ago. and ive pretty much given up looking for them... but i dont have a spare key and the car is stuck at my cousins house

what can i do? can i get a key moulded to my current lock? or do i have to get a new one???

this has been pissing me off all weekend! does anyone have any ideas?

Warpspeed Experienced

Warpspeed

Posted
Posted

First get into the car, maybe a coathanger ? Then remove one of the doorlocks and take it to a locksmith on Monday.

He will be able to dismantle the lock and measure the pins. From this he will be able to make you a key. If it works, get several made !

Hide a spare key somewhere under the car where it cannot be seen. Or maybe bolt a spare key behind the numberplate or something.

Then one day when you loose your keys at 4AM, out in the middle of nowhere, in the pissing rain, with no money in your pocket, you will be o/k !

dAVE Grand Master

dAVE

Posted
Posted

i know what its like. I sorta did the same thing. Was on holiday in Byron Bay and couldnt find the keys anywhere on the day we were meant to leave.

Lucky wrx's are easy to break into, so we managed to pack the car, go to the pub and forget about it.

Found the keys 2 days later in one of the girls handbags.... felt stupid, but we got 2 extra days of holiday!

Shell Grand Master

Shell

Posted
Posted
Originally posted by Dragon18

if you lose your keys that means u cant start your car anywayz coz

of the immobiliser and alaram hehe

hehe just do what my dad does (being the extra cautious Camry driver he is :D )

he's got a key and a spare remote for the security system tucked away up in one of the bumpers. It's tied up with heaps of wire so it can't come loose and it's in a sealed plastic bag so that no water or dirt gets in.. :D

Warpspeed Experienced

Warpspeed

Posted
Posted

Well I also have an alarm/immobiliser and steering wheel lock. Both front doorlocks are disconnected so a thief cannot twist the locks around with a large screwdriver. That is how I lost my last car.

If I lose my keys, or the battery in the remote goes flat, my system is as follows.

Get the spare key from under the car, get into the rear boot. Inside the boot I have a spre remote for the alarm to gain entry, and a spare key for the steering wheel lock.

mr180 Contributor

mr180

Posted
Posted
Originally posted by Warpspeed

If I lose my keys, or the battery in the remote goes flat, my system is as follows.

Get the spare key from under the car, get into the rear boot. Inside the boot I have a spre remote for the alarm to gain entry, and a spare key for the steering wheel lock.

Just make sure the battery is replaced every now and then! It would be so frustrating to find the spare remote wasnt working. I was stuck for a while in Chadstone late one night after a movie when my immobiliser battery died... I pulled the battery out and twisted it around and luckily it somehow had enough power to work so I could start the car.

blind_elk Grand Master

blind_elk

Posted
Posted
Originally posted by Warpspeed

Hide a spare key ...  behind the numberplate or something.  

I did that once. One problem - the screwdriver to undo the number plate was in the boot - which required the key behind number plate to open it!!!!!

With regard to the alams and immobilisers - most immobilisers simply intercept the wire to the starter motor, they don't actually disable the car (all the lights on the panel light up, just the starter won't work. Solution (for manuals only) - kick start down a hill!!!! And the alarm should have some means to disable it without the module.

Warpspeed Experienced

Warpspeed

Posted
Posted

Bolting the key behind the numberplate was used as an example to get people thinking, but I have actually done this myself though.

If you use a stainless steel screw and a brass nut, with a shakeprook star washer, it will not vibrate loose. It will not rust up either. By twisting the key, the nut can be loosened quite easily. Try it and see ! Or maybe a brass wing nut.

Another way is to attatch a long piece of stiff wire to the key and poke the key down inside a chasis rail, gearbox crossmember, behind the front grille, inside a hollow towbar, or something. If you can feel the end of the wire with your fingers, then pull the whole lot out.

Use your imagination. Suerly you can find a place that does not require a full 250 piece toolset on a trolly to get at the key. Jeeeeez

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...