Jump to content
SAU Community

Recommended Posts

I can't be the only one who's heard of left-foot braking in performance driving, surely, I mean i'm the first to admit I'm not even that flash a driver. And I'm not talking about the examples above of muppets driving round leaving their foot on brake, or not applying the technique properly.

The idea is to make for a more smooth transition of the car; making it more stable when getting on/off throttle rather than the car shifting direction suddenly. I've only dabbled with it but you can feel the difference, especially when coming back on throttle out of a corner. Would take a lot of practice to have as a skill, but would imagine it would be a good thing to have as a performance driver.

I'm an idiot as well then, always left foot brake in my cars, even the manual gearboxed cars. It have it to a point that using my right foot feels unnatural.

Your right hand is still left brain controlled.

Your left foot is still right brain controlled.

Overall, you're probably able to do a variety of things with limbs on both sides that other people will find awkward.

However, you might still fall short of what they call "ambidextrous".

Try playing Drums. It's very Zen trying to not concentrate on any one limb but having all 4 doing different things. :D

Great Fun!!!

I am left handed and left footed but seem to be right foot dominant. :unsure:

I had a mate demonstrate this. (Try this at home Kids). Get someone to give you a good shove in the chest to put you off balance and see which foot you naturally step back with to regain your balance. It may surprise you.

As I said before it still took some time to get used to the left foot braking on a Forklift but is Easy as once you get used to it. (20 year driving habits are hard to Brake!) :laugh: and I only drive cars on the roads and not on the track. (yet) but I can sure see the benefits it may bring in certain situations.

I'm an idiot as well then, always left foot brake in my cars, even the manual gearboxed cars. It have it to a point that using my right foot feels unnatural.

I'd be interested to see how you actually drive a manual.

So when an emergency stop occurs in a manual your brain now has to make a choice, push brake with left or right foot rather than just push brake woth the foot you always use.

See my concern? I certainly understand , but each to his own. Just remember driving on the street is substantially different to a race or rally so can't be compared in my eyes.

  • Like 1

So when an emergency stop occurs in a manual your brain now has to make a choice, push brake with left or right foot rather than just push brake woth the foot you always use.

after reading this, yes I agree wholeheartedly, that yes, *YOU* should not try it as clearly you will become confused and a danger to other road users. So what you're saying is that all those professional race drivers should not be allowed to drive on public roads or hold a license.

Just remember driving on the street is substantially different to a race or rally

farken lolll, thanks o wise one, i will be sure to remember your words of wisdom

can't be compared in my eyes.

, and you're certainly entitled to hold your own opinion, as is everyone else. My issue was with you crying down anyone who left-foot brakes as an idiot, without actually knowing anything about it.

As said earlier it's a valuable technique worth learning, if you have the time/inclination./finished.

Thanks for your well thought out and formatted reply.

A piece of information I would like to know is if race car drivers left foot brake on the road. You are simply assuming they do.

Anyway do what you want. That's the beauty of being in a car. No one can actually force you to do anything, brake woth your hands for all I care. Mick Doohan does. Oh wait, that's on a motorbike on a racetrack.

I suck all Internet arguments so humbly bow out to your superieror skills.

Ps.

I really like the assumptions you make about me.

Edited by Ben C34

As said earlier it's a valuable technique worth learning, if you have the time/inclination./finished.

Adjusted your post to contain the addendum...

"...time/inclination/aptitude..."

I can only add that one should only learn this skill (road or track) whilst there's no-one up your backside.

I'm right-handed but can write perfectly fine and at "normal" speed with my left hand, the only difference being it's a mirror image of what I write with my right hand, including the sloping of the letters. Am I clinically insane or just weird?

I've tried left-foot braking a couple of times but after nearly smashing my nose against the windscreen I decided I'd hold off on practicing further until I'm in a controlled environment.

Edited by Hertz Donut

Nice story! No neurological specialists on this forum alas.

I once had a tour guide in the Philippines. She'd write left handed from the bottom right of the page to the left bottom; and work her way up. When she turned the page upside-down, everything looked normal. I couldn't get my head around that one either.

I LFB in a manual

Anyone who's ever rallied a FWD or AWD should be intimate with left foot braking. RWD not so much, but still has benefits.

Most people don't have the fine control of the left foot because they're used to pushing the clutch in (not as much to do with whether you left or right handed)

On the road though, right foot it is.

  • Like 1
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...