Jump to content
SAU Community

Recommended Posts

Cars and motorsport are not cheap things. A drift day at QR can be pretty cost effective, Morgan Park track days are fairly cheap, if your car is set up for it, QR sprints aren't too bad either. Neither are skidpan days. The Dutton rally on the other hand, is over $1600 to enter. Plus tyres, plus accomodation, plus everything.

I know skidpan days well, so that's what I'll talk about. All you people who say you "can't afford it" or its "too expensive" should think about the following.

I am planning on having a full skidpan day every 3 months from now on. Say its $180 to enter. There are 90 days between skidpan days, so you only have to save $2 a day, to afford a full skidpan/time trial day every 3 months. As far as other costs go - you don't go through a set of tyres, its not hard on the clutch, or anything else for that matter. I probably wear my tyres more on a few mountain runs than a full skidpan day. It's a very cost effective low risk event. Yes something on your car might fail - but it somethings going to break, it's going to break no matter where you are. $2 a day for an awesome full day event (and lunch!) is very very cheap. You can run almost anything, its a fairly even playing field - stock VL's to GTR's, doesnt matter.

Morgan Park track days are also great, more tyre wear if you don't have your wheel alignment sorted (i didnt), but you can go out there in a road car and have a blast. Low entry cost, but it is a bit of a drive.

$2 a day.....

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/
Share on other sites

I went for a track day organised by a major manufacturer on wednesday and got to drive some pretty groovy machinery, and then got served continental lunch, and was given a gift before i left for home, and didn't cost a cent.

So unless your dealing i'm not coming.

on a lighter note $180 isn't alot, for a dayful of fun with a bunch of decent ppls

or u can go and sit at the local plaza and stare at the dredge of the society for nothing.

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-917330
Share on other sites

Hi slip,

I'm not having a go so dont take this the wrong way...

The only skidpan day I attended was about $90 from memory, however current days have doubled to $180.  

What has caused the price hike since I last went... More track time, lunch, more professional drivers?

Correct me if I am wrong Shane, but you attended the last one I went on last year and if was only a half day, pan only day. Not a full day, pan and LVMA day.

lol at SLIP

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-917394
Share on other sites

What is the track time expected for the day per driver ?

Morgan Park is great value, I organise a day there and it costs around $35 a head. And most people are sick of driving by the end of it. 40 to 50 laps for the really keen.

The track is also good. Reminds me more of the street than a race track. No worries with oil surge etc, like if you go to QR.

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-917870
Share on other sites

just lvma and skidpan.

the lvma is a large area with water bubblers on it that leak water onto the surface, some of its dry, some of its wet, and a small part of it is actually linoleum - which is tricky. They set out 3 time trial runs with cones. 1 slalom with a diamond at the end, you run through, round the diamond, run back. 27secs is quick. The other one is a launch, left turn, sprint down a straight, then a 4 cone clover leaf style section, then sprint back. 40secs is quick. Half the group does each one, then you swap. Then we use the whole area in a large time trial. I forget what the times are for that. In the now infamous words of Tze, you can go for time, or go for sick! Tze prefers the latter. If you try too hard to get a quick time and stuff up, the worst that will happen is you might tap a cone.

I think it's cheap, for what you get, the low risk, and low vehicle wear.

Check the last "skidpan day pics" thread for LVMA pics.

Also - how many other events can you do where an NA 31 has a chance against 33 GTSt's, noone cares what you drive, and with such a great friendly atmosphere? The lunch is good too.

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-917966
Share on other sites

just lvma and skidpan.

the lvma is a large area with water bubblers on it that leak water onto the surface, some of its dry, some of its wet, and a small part of it is actually linoleum - which is tricky. They set out 3 time trial runs with cones. 1 slalom with a diamond at the end, you run through, round the diamond, run back. 27secs is quick. The other one is a launch, left turn, sprint down a straight, then a 4 cone clover leaf style section, then sprint back. 40secs is quick. Half the group does each one, then you swap. Then we use the whole area in a large time trial. I forget what the times are for that. In the now infamous words of Tze, you can go for time, or go for sick! Tze prefers the latter. If you try too hard to get a quick time and stuff up, the worst that will happen is you might tap a cone.

I think it's cheap, for what you get, the low risk, and low vehicle wear.

Check the last "skidpan day pics" thread for LVMA pics.

Also - how many other events can you do where an NA 31 has a chance against 33 GTSt's, noone cares what you drive, and with such a great friendly atmosphere? The lunch is good too.

:cheers:

Pics from the last one are at: www.skylinesaustralia.com/members/strutto/skidpan

Link to comment
https://www.sau.com.au/forums/topic/44907-cost/#findComment-918038
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...