Jump to content
SAU Community

Recommended Posts

Well after driving a skyline for 6 years in the shit parts of sydney, I finally got pulled over and defected for my enclosed pod filter(which wasn't properly enclosed) and aftermarket exhaust.

I asked the guy where can I take the car to fix this and he said any place which does pink or blue slips. Is this correct?

Does anyone know where I can get a proper enclosure for my pod? These things we make here are no good, the cop will pry things into the box to get it open and sneak his camera in there.

Anybody have a stock exhaust?

Its a minor defect, I got 5 driving days left. Need to get this one fixed asap. Any info would be good.

You don't need a stock exhaust, it just needs to be quiet enough to be in the legal limits with a print out as evidence.

A lot of repital exhaust places have a db meter capable of providing a print out

My 3 inch exhaust is under 90 db and flows 305 rwkw at the moment. (I think it was 86 at the revs they check here in sa.)

Hooker aero chamber centre muffler and a Berklee straight through at the back. No drone ever.

first, has to be BLUE SLIP (AUVIS) to clear defects on a non Australian delivered car.

second, borrow air box.

third, as stated, doesn't have to be factory exhaust, so long as under 90db at 75% rpm of peak power (iirc).

and a working cat fitted.

shove a massive wad of steel wool to quieten down if needed, pass test, remove and play on....

  • Like 1

Ok just fitted on the nismo exhaust. With this turbo setup theres no way in hell i can fit the standard box in there without fab work to the induction pipe.

Ive got a work cat and the car is quiet as shit now. This steel wool trick, do you stuff it behind the cat? Would it melt?

Ill try my luck with the updated enclosed pod. If no dice the wool i the exhaust and hit up wolverine for the stock box. Thank f**k its only a partial inspection for the two ticked items.

Also whats the go with being fined for the pod filter and not the exhaust? I was defected for the exhaust and pod, and fined because my pod was not enclosed. AFAIK I thought you could not be fined and this is the whole purpose of a defect notice, to give you time to fix an issue. Why was I fined for the pod filter and not for the exhaust?

Edited by SargeRX8

In regards to the steel wool, you shove it up the exhaust pipe art he rear.

Further from the cat the better.

They use it as a trick at certain tracks to quieten cars, but, if yours is quiet now, leave it.

And they can fine you because revenue raisers.

Although I was not defected for ground clearance, this nismo exhaust sits awfully close to the ground. He did the roll test and I was about 1cm from clearing his roller. This nismo exhaust sits about a whole inch lower than the diff. The lowest point of my car is the damn exhaust and my car isn't lower than stock! You could fit your head under my front bumper!

Car passed. Nismo exhaust came in just under with some packing. The workshop suggested the cop did actually have no leg to stand on in regards to the pod filter enclosure and said the current setup is fine.

He told me to clean all the engine crud off the engine too. He also said i need to get my exhaust mounts shortened to raise the exhaust and since the ground clearance was not on the list he let it go.

  • 3 weeks later...

Actually police are on a different level, I'm auvis so pink and blue slips and therefor know whats legal and police can defect whatever they like legal or not because there on another level and then it's up to people like me to confirm it's legal, also for what it's worth it does technically need to be a stock exhaust,even though places will clear it anything made post mid 70s need to be oe or oe equivalent, only thing u can put aftermarket is extractors really. The dB limits are there yet anything non factory needs engineering

Actually police are on a different level, I'm auvis so pink and blue slips and therefor know whats legal and police can defect whatever they like legal or not because there on another level and then it's up to people like me to confirm it's legal, also for what it's worth it does technically need to be a stock exhaust,even though places will clear it anything made post mid 70s need to be oe or oe equivalent, only thing u can put aftermarket is extractors really. The dB limits are there yet anything non factory needs engineering

Is my exhaust valid now since it is built by Nissan, being a Nismo exhaust and a bolt on option for the R33?

Actually police are on a different level, I'm auvis so pink and blue slips and therefor know whats legal and police can defect whatever they like legal or not because there on another level and then it's up to people like me to confirm it's legal, also for what it's worth it does technically need to be a stock exhaust,even though places will clear it anything made post mid 70s need to be oe or oe equivalent, only thing u can put aftermarket is extractors really. The dB limits are there yet anything non factory needs engineering

no, they're not.

They give you a defect, pink slip inspector can clear, same level.

Something is engineered, get defect because copy doesn't think it's right, go back, cleared because it is.

Same level.

That's what I'm getting at.

People who know virtually nothing about cars, are on the same level as those who know the law, and have the authority to say it's legal.

Is my exhaust valid now since it is built by Nissan, being a Nismo exhaust and a bolt on option for the R33?

factory options are legal, providing the meet the noise requirements, yet even though most exhuasts arnt technicaly legal according to rms design rules, the cops only dick you if there to loud realistically

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
    • I checked spark on all cylinders and they all visually have spark with the plug pulled and grounded, but plug 1 is the only one that fouled. This was a running swap that blew up and was rebuilt by a machine shop, put a new wiring specialties harness and did all gaskets, studs, and bolts while it was out.  compression is 135-150 across all cylinders. Aside from that from my understanding with the z32 ecu and maf the car should start regardless. The wiring for TPS and the dual 02 sensor/ dual knock sensor stuff shouldn’t actually stop the car from starting or even running well, (just slightly rich)  they just give fault codes. Car supposedly is supposed to start as long as you have z32 afm and ecu with the nistune base map and that’s info coming from a well known and trusted tuner who does a lot with SR/RB (Rsenthalpy). After more trouble shooting today where I’m at right now is that the cas is sending signal to the injectors they click while spinning the rotor, Fuel pressure is now set at 43psi, all cylinders have good compression and all of the plugs looked great (just wet with fuel) except for cylinder 1 which was very black (cylinder 1 has 150psi compression). all of the coils generate spark if pulled out and grounded out on the head. On the fuel pump car just pops into the exhaust. On starting fluid car will fire off. Hard to tell if all cylinders are firing off but definitley a couple. sounds like all of them but it’s only for 3-5 seconds hard to tell. 
    • Final update!!! Got the front bar fitted and sprayed and all sorted now. My cutouts worked great and the indicators aren’t just falling off. 😂  
×
×
  • Create New...