Jump to content
SAU Community

Recommended Posts

Hi Guys,

I've got some new wheels on the way so I have no need of these anymore. They are TE37SL's that I had powder coated gloss white as you cant get normal TE37's in 11" wide.

They come with 285/30/18 Federal RS-R's all round. Fronts have done about 100km and the rears have done about 1000km so a huge amount of tread on them. Also have some 50% tread Dunlop hard semi slicks that have plenty of grip left in them that can come with the rims if they go for the right price.

62YUfYg.jpg
9xjQrpB.jpg
4XJ5sHR.jpg
6eveLH2.jpg
mx8Rxj7.jpg

Price is $3800 ONO and pickup is preferred but will post at buyers expense. Wheels located in Rouse Hill, NSW and my number is 0403858714.

I put genuine blue TE37 stickers on them to replace the SL ones. I also have genuine blue valves and valve covers to go on just forgot to put them on when the tyres went on (to replace the red SL ones).

Thanks,

Brett

post-19753-0-87999400-1416023461_thumb.jpg

post-19753-0-23724000-1416023466_thumb.jpg

post-19753-0-61276000-1416023472_thumb.jpg

post-19753-0-38149300-1416023487_thumb.jpg

post-19753-0-18296500-1416023499_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/450734-18x11-18-te37-in-gloss-white/
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...