Jump to content
SAU Community

Recommended Posts

My 32 gtr is up for sale made 560hp on 22psi on pump 98. Was rebuilt less than 10k ago by cs mmotors. Running a gt4094r eboost street. Full adjustable Coilovers. Os giken twin plate cluth. Chasing 23k ono. Located in Townsville. I have probably missed a few things so if your interested send me a pm or msg on 0423041840 cheers

post-115677-0-05320600-1417668680_thumb.jpg

post-115677-0-63192600-1417668703_thumb.jpg

post-115677-0-69035200-1417668722_thumb.jpg

post-115677-0-19372800-1417668749_thumb.jpg

post-115677-0-42317500-1417668764_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/451385-wts-my-32-gtr-560hp-on-22psi/
Share on other sites

  • 3 weeks later...
  • 4 weeks later...
  • 2 weeks later...
  • 4 weeks later...
  • 3 weeks later...

I hope this is a bit better.

I bought the car early in 2013 with 98000ks. As it stands now it's at 107000ks. It was rebuilt 3 weeks after I got it by cs motors here in Townsville.

The motor.

The turbo is gt4094r.

je pistons 0.020 over size.

scat rods. 2000 series rod bolts.

Std crank with collar and oil gallery mods.

Tomie oil pump with external adjustable regulator.

ARP head studs.

Modified oil and baffled oil sump.

External and drains and restrictions fitted to the head.

Supertech duel valve springs.

adjustable hks cam gears.

Camtech camshafts 272s.

Microtech LTC15C ECU.

Microtech x6 ignition.

Microtech LTC dash display with gps.

Id1000 injectors.

Sard fuel rails.

Magnafuel fuel pressure regulator.

Twin 044 fuel pumps and 2.5L surge tank.

6 boost manifold.

Other points on the car.

Gearbox is Reconditioned from previous owner.

Os giken twin plate clutch.

Brand new Pwr radiator.

Eboost street boost controler.

50mm blow off vale can't remember the name of it.

Brand new battery and alternator.

The interior.

It has an alpine cd player that I never use.

It has aftermarket speakers.

No bubbles or cracks in the dash.

Seats are in good condition no rips or tares.

The steering wheel and the drivers side apiller are a bit ratty.

The outside.

Still have the standard rims as that's my style stock sleeper.

adent/scratch on the bonnet.

Some scuff marks on the front bar also.

The paint is on good condition otherwise.

I have run the car once at palmyra drags in Mackay it run an 11.6 @ 126 mph.

I'm not sure how to add more photos other wise I would. Il add more when I remember it cheers joey for the help.

  • Like 1

Great looking GTR, love the single setup! And in gun grey. Almost exactly the same as my old one only far neater.

Good vid on CS Motors FB page too.

What is its drivability on the street like with the GT40, when does it come on boost and how does it pull?

And no E85 tune?

Cheers Ben. It is laggy but I haven't really been in any other gtr to compare it too. I don't find it that hard to drive As I only drive it to and from work. I think full boost is about 4500rpm but it's only limited to 7000rpm at the moment with plenty left in it. In 2wd pretty much useless with stock rubber. Pulls hard in 4wd tho. There is no e85 on pump here that's the only reason why I haven't done it...

Cheers guys. It also has pedders adjustable coiloves. Walbro in tank lift pump I think its a 250lph but will find out. Had a service last month also. Will be getting new DBA t3 rotors and qfm pads in the next few weeks.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
    • FYI: Racebox RE7R Custom Tunes Released!   https://goracebox.com/.../2017-infiniti-q50-q60-re7r-tcm...   FOR GEN 2 (21+) VEHICLES, PLEASE SEE NOTE AT BOTTOM See more   But whomever tuned your car is the tuner you should go back to, AMS, Sonictune or BT Tune....
×
×
  • Create New...