Jump to content
SAU Community

Recommended Posts

Hi guys,

My poor 33 s1.5 looks like it will be written off from the hail last week, I might need a replacement Skyline really soon.

I am looking for something around the $7.5k mark. Interested in R33 s1.5s or R32s, would prefer something with an RB25, if I end up with an RB20, I will wanted to have a few mods to compensate.

Something where a safety cert can be organised without too many hassles would be good.

Link to comment
https://www.sau.com.au/forums/topic/451386-wtb-r33-gtst-s15-or-r32-gtst/
Share on other sites

Hi guys,

My poor 33 s1.5 looks like it will be written off from the hail last week, I might need a replacement Skyline really soon.

I am looking for something around the $7.5k mark. Interested in R33 s1.5s or R32s, would prefer something with an RB25, if I end up with an RB20, I will wanted to have a few mods to compensate.

Something where a safety cert can be organised without too many hassles would be good.

have a look around melbourne, drift sales and the like.... you find a 33 for half that easily.

32 not so much.

series 1 but you get the idea....

if you wanna project some minters out there....

http://www.gumtree.com.au/s-ad/braeside/cars-vans-utes/1995-nissan-skyline-r33-gts-4-coupe/1062687760

gt4.... gtr box, couple of grand 4wd awesome ness....

http://www.gumtree.com.au/s-ad/silvan/cars-vans-utes/r33-gtst-skyline-/1063136188

pretty much done 2k under your budget, fly down drive it home have change lol

they have had a minor resurgence in price recently according to gumtree....

Everyone has a 33 or a 32. What you really want is this: http://www.sau.com.au/forums/topic/443726-for-sale-1988-f31-leopard-ultima/

I'm actually tempted, i have only seen a couple of them

'Tis pretty rare. Hit me up if you're keen to check it out. It's not as fast as a 32 or 33 but I'm negotiable on price so you'll have some money left over for mods. And it's way cooler ;)

about mods, would it be all z33 shit that i would go for? I would prob eventually put a manual box in but have no idea which box to go for

Most parts are either Z31, Z32 or R31. When I did the 100k service almost everything was Z32.

For manual conversion you'll want a Z31 or Z32 gearbox, flywheel, clutch, etc. Pedals from an R31. Tailshaft Z31 might work, or custom.



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...