Jump to content
SAU Community

Recommended Posts

I've always assumed its because more people = bigger economy (easy way to keep growth going) = more power. If you look at population density, resources etc, compared to other countries, Australia is no-where near full, even if you take out all the useless desert. Personally I would prefer to keep the population low, but I believe expanding the population enjoys support from both sides of politics

The actual population growth policy was around ensuring we have enough people should another country decide to invade following how close we came to this in WW2

Can't remember who it was, but pretty sure the line was - "lets populate ourselves, before someone else does it for us"

There was an estimate that we needed to grow by approx 200k people per annum.

It was viewed that around 70k could be achieved through birth rates, the rest would come from migration.

The UK was unable to meet the 130k needed, which then led to the ending of the "White Australia" policy and commencing migration agreements with several countries.

^ Interesting - that's another aspect of larger population = more power. Also, letting in younger immigrants could be used offset the ageing population, but i don't know if the system is setup that way, but it should be.

MHM had no right to be out on bail. He had not right to Centrelink benefits. And he had no right to be here. But I do pray for families and friends of the barista, the barrister and the bastard.

Seems like criminals have more rights/protection around here than non-crims. If I smash a would be robber over the head, he can sue me and will probably win.

The court's defence regarding his bail was that the prosecutors didn't have a strong enough case against him for the alleged murder. Disregarding his previous convictions of course!

Will things change regarding crims on the street? Probably not.

  • Like 1

Seems like criminals have more rights/protection around here than non-crims. If I smash a would be robber over the head, he can sue me and will probably win.

If he's taking your stuff, yes. If you think he's going to harm/kill you then you can defend yourself. For example, if you think "i am in fear of my life" and you accidentally smash him harder than is required so stop him killing you, because you're not an expert fighter, then you may be ok. I'd imagine that if it was a his word against yours thing in court, you'd probably be more believable being the victim.

If he's taking your stuff, yes. If you think he's going to harm/kill you then you can defend yourself. For example, if you think "i am in fear of my life" and you accidentally smash him harder than is required so stop him killing you, because you're not an expert fighter, then you may be ok. I'd imagine that if it was a his word against yours thing in court, you'd probably be more believable being the victim.

I've read a few too many Australian articles to say otherwise.

I've been listening to this shit since 10 o'clock this mourning, suprised it took this long for someone to post up about it

1 dude, really, don't we have snippers

No but we have media taking snaps of him in perfect view with no hostages as shields. just shot the dude in the head and save 2 innocents lives.

I've read a few too many Australian articles to say otherwise.

Me 2. tbh if someone steps on your property with the intent to steal something or hurt you or any of your family. laws should go straight out the window. Same when there is a sketchy muslim sending hate mail to deceased australian soldiers families and you don't have enough evidence to convict him of murder. keep him in jail until you can can find him guilty or innocent. don't send him into public to allow him to walk the streets among everyone else. I blame the courts/justice system more than the nut job that did it.

Edited by SkylineR33RB25

The police did do amazing 2 dead is pretty good for so much hostages. No blame on polices part.
But look at this image, no hostage as shield. any sniper in the world could make that. 999/1000 times

1418779188127.jpg

Me 2. tbh if someone steps on your property with the intent to steal something or hurt you or any of your family. laws should go straight out the window. Same when there is a sketchy muslim sending hate mail to deceased australian soldiers families and you don't have enough evidence to convict him of murder. keep him in jail until you can can find him guilty or innocent. don't send him into public to allow him to walk the streets among everyone else. I blame the courts/justice system more than the nut job that did it.

You would be ok with a "sketchy Christian" sending hate mail to dead soldiers? There's a group of Christians in america who do that and protest at funerals.

I assume you wouldn't like it.

Makes me wonder why you specified Muslim in your post. Makes no difference.

Edited by Ben C34

You would be ok with a "sketchy Christian" sending hate mail to dead soldiers? There's a group of Christians in america who do that and protest at funerals.

I assume you wouldn't like it.

Makes me wonder why you specified Muslim in your post. Makes no difference.

You're right. I wouldn't care who they are. If you don't support what we are doing over there then that's not the way to protest..

Me 2. tbh if someone steps on your property with the intent to steal something or hurt you or any of your family. laws should go straight out the window.

Your system requires a way to quickly and accurately establish intent. How would you do that?

The police did do amazing 2 dead is pretty good for so much hostages. No blame on polices part.

But look at this image, no hostage as shield. any sniper in the world could make that. 999/1000 times

1418779188127.jpg

Was that photo taken before Police could establish what was happening? Did he then stay away from the windows, with victims holding up flags in the windows, because he was worried about getting sniped?

The only story i heard was that he had a sawn off double barrel shot gun. If that's the case, then he was only ever likely to kill two people.

The whole "should have sniper ed him" armchair hindsight train of thought also assumes there was a sniper next to you camera man.

Um, get it right, it was an excavator chair, and I suggested it less then 2 hours after the shit started and they had 16 hours to organise something before the baristor did something

  • Like 1

Um, get it right, it was an excavator chair, and I suggested it less then 2 hours after the shit started and they had 16 hours to organise something before the baristor did something

Maybe you should change careers.....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...