Jump to content
SAU Community

Recommended Posts

trying to confirm some info i have been given, unsuccessfuly so i might as well just ask.

in later years i.e.94, did the R32 gtr adopt an early version on the R33 RB26?

if so, what were the main differences?

any other differences with late model 32gtrs?

if im spastic and missed some informative sticky post just redirect me.

cheers.

Link to comment
https://www.sau.com.au/forums/topic/451967-32-gtr-late-model-engine-change/
Share on other sites

I suppose what you're asking is, "Did the late R32 26s get the better oil pump drive?", because that's really the only noticeable difference between the engines AFAIK.

And I may be wrong, but I thought that the change from skinny to full fat collar was in 1991.

Edited by GTSBoy

Correct from in 1992 they had a full drive collar.

Does not mean by any stretch of the imagination that the old oils pumps won't fail. I had a failure which dropped a bearing.

20+ year old super cars needs attention and love :)

The longer collar is built into the crank, not a actual collar added on, its part of the crank.

No it does not stop oil pumps from breaking.

Edit, just to add, it does reduce the chances of breaking a oil pump by speading the load and wear across a larger area, however oil pumps still break with the long nosed oil pump drive cranks.

Edited by GTRPSI

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Can u check this way it works for power supply?
    • These coils draw 10amps that what i read online
    • I appreciate the detailed explanation, think I understand now. I spent the better part of last night reading what I could about shuffle and potential solutions. I had replaced the OEM twin turbo pipe with an alternate Y pipe that is separated further away from the turbo. The current one is from HKS and I had a previous pipe that was separated even further away, both have shuffle. I had heard that a divider can be welded in to the OEM pipe to remove turbulence, and figure that aftermarket pipes that are more separated would achieve the same thing. From what I read, most people with -10 turbos get shuffle due to their size, though it's a bit less common with -5s on a standard RB26. I think Nismoid mentioned somewhere it's because OEM recirculation piping is common in Australia with -5 cars. It seems that the recommendation tends to vary between a few options, which I've ordered in what I think is most feasible for me:  1. Retune the MAP or boost controller to try to eliminate shuffle 2. Install OEM recirculation piping 3. Something called a 'balance pipe' welded onto the exhaust manifolds. I don't know if kits for this are available, seems like pure fabrication work 4. simply go single turbo My current layout is as follows: Garrett 2860 -5s HKS Racing Suction intake MAF delete pipes HKS racing chamber intake piping hard intercooler piping,  ARC intercooler HKS SSQV BOV and pipe Haltech 2500 elite ECU and boost solenoid/controller HPI dump pipes OEM exhaust manifolds HKS VCAM step 1 and supporting head modifications Built 2.6 bottom end All OEM recirculation piping was removed, relevant areas sealed off I'll keep an eye out for any alternative solutions but can get started with this.  Only other question is, does shuffle harm the turbo (or anything else)? It seems like some people say your turbo shafts will explode because of the opposing forces after a while and others say they just live with it and adjust their pedal foot accordingly. 
    • That worked out PERFECTLY! Thank you big time to JJ. He was able to swap me his stock diff. He drove all the way to me as well. Killer! Removal & install was pretty straightforward. The diff itself is HEAVY. So that’s a 2 man job.  Man does the car drive nice now! Couldn’t have worked out any better 👌
×
×
  • Create New...