Jump to content
SAU Community

Recommended Posts

Enkei RPF1 18x10.5 +12 (Black) with brand new Hankook RS3 285/35/18s. All done max of 500km. You can still see the Hankook where the tyre meets the road. $2000.00 Wheels don't even have brake dust on them.

Trust T517z 8cm Turbos. Chris at racepace has inspected thinks they are in good condition. No play. Come with the front pipes to match $1000.00

Dump pipes. Trust I think. $100.00

ATS & Across Twin Plate Ceramic Clutch. Luke at Racepace has had apart if you want an opinion on it. In great condition. Pics attached. Done less than 1500km. $1000.00

Recirculation catch can $50.00

80 mm afms from RB25 series one motors. Seem perfect $100.00

Carbon Fibre front lip. In perfect condition. $200.00 You can see it on the car here http://www.sau.com.au/forums/topic/449000-rare-opportunity-r33-gtr-new-fresh-forged-rb26/

ACL Race series Forged pistons. These seem fine but as I don't know for sure what happened to motor they can go for $100.00

Custom 3.5'' exhaust with Varex 4inch muffler. I believe it is the vmk 18-400. With controller. $400.00 the lot. Muffler pretty much brand new. Pick up only.

Pod filters. They have drift written on them. Near new. Also has a guard. $100.00

Carbon Fibre cam cover. Brand new $50.00

R33 GTR crankshaft. Been modified for N1 pump etc. I havn't had tested but supposedly just redone by mechanic who had the car. $200.00 because I personally havn't had it tested to say what condition it is in.

All the photos are attached because I couldn't seem to post photos on the thread.

Everything is ONO and preference will be given to pick up buyers who can do cash. I will post at buyers expense.

If you want more photos just ask. There will be more parts to come as car is pulled apart further including 50mm radiator, Tein shocks with EDFC etc. I have priced everything I think to move fast however if anything is truly over prices please let me know.

I am in Croydon Victoria.

P.M. me for number.

Mick.

post-882-0-39502600-1419219822_thumb.jpg

post-882-0-44389400-1419219840_thumb.jpg

post-882-0-67251800-1419219852_thumb.jpg

post-882-0-05692600-1419219865_thumb.jpg

post-882-0-83257800-1419219875_thumb.jpg

post-882-0-48662000-1419219888_thumb.jpg

post-882-0-02020200-1419219937_thumb.jpg

post-882-0-07836100-1419219948_thumb.jpg

post-882-0-60808500-1419219956_thumb.jpg

post-882-0-71470100-1419219964_thumb.jpg

post-882-0-97142900-1419219972_thumb.jpg

post-882-0-43515000-1419219980_thumb.jpg

post-882-0-30108000-1419220192_thumb.jpg

post-882-0-31371200-1419220199_thumb.jpg

post-882-0-03937200-1419220549_thumb.jpg

post-882-0-44317100-1419220556_thumb.jpg

post-882-0-84983400-1419220563_thumb.jpg

post-882-0-86555500-1419220731_thumb.jpg

post-882-0-14944400-1419220745_thumb.jpg

post-882-0-80891000-1419220753_thumb.jpg

post-882-0-58976800-1419220765_thumb.jpg

post-882-0-54468200-1419220837_thumb.jpg

post-882-0-04330500-1419220845_thumb.jpg

post-882-0-58509300-1419220857_thumb.jpg

post-882-0-12301900-1419221140_thumb.jpg

post-882-0-30064600-1419221155_thumb.jpg

post-882-0-05674800-1419221162_thumb.jpg

post-882-0-38287000-1419221197_thumb.jpg

post-882-0-00517300-1419221209_thumb.jpg

post-882-0-26140200-1419221222_thumb.jpg

post-882-0-35998500-1419221293_thumb.jpg

post-882-0-19759300-1419221303_thumb.jpg

post-882-0-02316700-1419221311_thumb.jpg

post-882-0-49412900-1419221466_thumb.jpg

post-882-0-38032700-1419221511_thumb.jpg

post-882-0-63656100-1419221524_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/451971-gtr-parts-wheels-turbos-etc/
Share on other sites

Hey mate,

Any idea of mileage the turbos has done?

What power/boost have they ran before removing if you've any idea.

Hey mate,

Any idea of mileage the turbos has done?

What power/boost have they ran before removing if you've any idea.

No idea mate. Mopst of the car has done very few miles since being modified but I don't actually know.

Is that the right price for the trust dumps/front pipe?

Yes. Someone has said they want them already so I assume they are too cheap. Oh well his gain.

Hey mate,

any other info. of ACL Race series Forged pistons

and the way to deliver or post them to my place

thankx alot

What do you want to know about them? I don't know much about them other than they were going to be put back in the car when rebuilt but I'm going another way so using other pistons, rods etc so can sell these.

Where are you? Saudi Arabia?

Edited by Mick Trainer

hi there

i wanna take the item as its shown in your pic but pistons brand name? and champer ring missing from one of them?, connection rod brand name? any damege of their bearing means unuseful connection rod

yes i m from saudia arabia

so sorry about all of that Qs but looking for connection rod in good condition and heavy duity

last not lest how match money they will cost for you and delivery post in US Dollar

serious buyer

thankx

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • @Murray_Calavera  If I were an expert I wouldn't be in here looking for assistance.  I am extremely computer literate, have above average understanding on how things should be working and how they should tie together.  If I need to go to a professional tuner so be it, but I'd much rather learn and do things myself even if it means looking for some guidance along the way and blowing up a few engines. @GTSBoy  I was hoping it would be as simple as a large vacuum leak somewhere but I'm unable to find anything, all lines seem to be well capped or going where they need to be, and when removed there is vacuum felt on the tube.  It would be odd for the Haltech built in MAP to be faulty, the GTT tune I imported had it enabled from the start, I incorrectly assumed it was reading a signal from the stock MAP, but that doesn't exist.  After running a vacuum hose to the ECU the signal doesn't change more than 0.2 in either direction.   I'll probably upload a video of my settings tomorrow, as it stands I'm able to daily drive, but getting stuttering when giving it gas from idle, so pulling away from lights is a slow process of revving it up and feathering the clutch until its moving, then it will accelerate fine.  It sounds like I need to get to the bottom of the manifold pressure issue, but the ignition timing section is most intimidating to me and will probably let a pro do that part.  Tomorrow I'll try a different vacuum line to T off of, with any luck I selected one that was already bypassed during the DBW swap. @feartherb26  I do have +T in the works but wanted to wait until Spring to start with that swap since this is my good winter AWD vehicle.  When removing the butterfly, did it leave a bunch of holes in the manifold that you needed to plug?  I thought about removing it but assumed it would be a mess.   I notice no difference when capping the vacuum line to it or letting it do its thing.  This whole thing has convinced me to just get a forward facing manifold when the time comes though.
    • Update: tested my spark plugs that are supposed to be 5ohms with a 10% deviation and one gave me a 0 ohms reading and the rest were 3.9ohm<, so one bad and the others on their way out.
    • 9" wheels are a little too wide for a RWD 32. They can fit. People have put R33 GTR wheels on 32s for years and years. But they are a very tight squeeze. This has been known for about 30 years. As I said - there is no difference between a 17 and an 18 in terms of what will fit. The rolling diameter needs to stay about the same as stock - not very much larger. If you increase that, you will start to have problems. If you increae rolling diamater at the same time as yo increase width, you will have problems earlier. as 9" wheels are pushing the boundaries already, you would need to be careful with tyre choice. I would put 8.5s on the front of mine, but would expect problems with 9s.
    • post up screen shots of your injector tables
    • Diagnostic flow for a code 21 says check signal at the ECU pins, on a voltmeter of some kind it should read 0.1V at idle, 0.12V cranking, 0.15-0.25V at 2000 rpm. Check each coil such that +1, -3 is infinite or very high resistance, -3, +2 should do the same. (-1, +3), (+3, -2), (+1, -2), and (-1, +2) should all be somewhere between 0 ohms and high resistance. If you trace the path from the coil pin all the way back to the ECU in the diagram the resistance you measure at the coil vs connected to the harness should be pretty much the same. 
×
×
  • Create New...