Jump to content
SAU Community

Recommended Posts

Looking at getting a 350GT but after reading these forums I'm a bit skeptical.

I like the look of the 2008 350GT with Paddle Shift but scared about the studdering issue?

I could get a 2006 but then worried about the 8 speed gearbox packing up.

Is there a reliable 350GT or either way could I be looking at problems down the track?

Link to comment
https://www.sau.com.au/forums/topic/452176-v35-or-v36/
Share on other sites

I'm in the same boat but because of budget ($10 to 14k)I've been mainly confined to searching in the 03/04 model range , I've looked at importing in order to get low K's and where there may be a better chance of a a trouble free vehicle as some of the issues seem usage related but this thinking has it's flaws also, I'm sitting on the fence at the moment.

I think if a good clean OE R34GT-t auto popped it's head up right now within my budget I'd probably go for it , I've had a manual one previously and like the car a lot--even though a good 350GT is probably a better car in so many ways.

Edited by BASHO
Link to comment
https://www.sau.com.au/forums/topic/452176-v35-or-v36/#findComment-7452353
Share on other sites

Just avoid the V35 CVT if you don't want the problems associated with it.

It was only an option anyway.. you can still get the standard 5sp auto or 6sp manual on the V35 Sedan.

Or go with the KV36 (2008+) 370GT. (not sure which ones come with paddle shifters though)

Link to comment
https://www.sau.com.au/forums/topic/452176-v35-or-v36/#findComment-7452360
Share on other sites

Ah. Is there a way of telling by looking at online auction photos which is a CVT model?

So you would recommend to stay away from the v36?

The CVT equipped V35 has paddle shifters on the steering wheel, and usually carries the name 350GT-8, although not on the actual badge on the rear.

I wouldn't have a problem with a 350GT V36 if I had the option and wanted an auto, the main reason I went for a V35 is because I wanted a 6sp Manual Sedan. If money wasn't an issue, I would look for a 2010+ V36.

Link to comment
https://www.sau.com.au/forums/topic/452176-v35-or-v36/#findComment-7452430
Share on other sites

The stuttering issue? Is that on the 3.5s or the 3.7s? Not noticed anything on my 3.7

Would it be covered under dealer warranty in NZ? And I would also think a lot more mechanics would be able to fix up any issues on imports in NZ because of the different regulations and just the shear volume of them..... I know that when I had my R33, my local AUS Repco contacted their NZ collegues for the service and parts info. Were able to confirm things like the VL water pump being a suitable replacement part.

Wow just found an infinity in NZ

http://www.trademe.co.nz/Browse/Listing.aspx?id=824377307&open_homes=&region=&district=

I like the look of this.

This is a 350GT Type S with Infinity badges fitted... Steering wheel still says Nissan and I bet the stereo does as well... :-)

On the V36, anything with a S (Type S and Type SP) have the paddle shit and 18"'s. Type P has no paddle shift and is also on 17"'s

Edited by nickcorr
Link to comment
https://www.sau.com.au/forums/topic/452176-v35-or-v36/#findComment-7452483
Share on other sites

The stuttering issue? Is that on the 3.5s or the 3.7s? Not noticed anything on my 3.7

This is a 350GT Type S with Infinity badges fitted... Steering wheel still says Nissan and I bet the stereo does as well... :-)

On the V36, anything with a S (Type S and Type SP) have the paddle shit and 18"'s. Type P has no paddle shift and is also on 17"'s

I believe there was some issues on the early V36, but there was an ECU update to fix it, problem was Nissan Japan refuses to supply the update to Australian Dealers. If the car was recently imported, chances are it has had the update applied before it left Japan. Not sure if there is any easy way to tell though.

And yes, it is a Skyline. If it was an Infiniti, the steering wheel would be on the other side. I don't think there were any RHD Infinitis in 2008, but plenty of people that put Infiniti badges on their Skylines. They are the same car anyway.

Link to comment
https://www.sau.com.au/forums/topic/452176-v35-or-v36/#findComment-7452492
Share on other sites

Fyi the dreaded CVT gearbox was only in 2001-2003 GT-8 sedans.

Yes, as mentioned, I am pretty sure there has never been a stuttering issue with 370GTs. And for a small extra amount of money, why would you not want the extra power anyway?

Be careful looking at cars from NZ - I have a feeling you cannot import them - -I remember something about them having to come straight from Japan, not an import of an import.

Talk to Iron Chef - he is by far the best bet to get the exact car out of Japan at the exact price you want. Once you start getting lists/photos/details of cars coming up for auction, it will blow your mind.

Link to comment
https://www.sau.com.au/forums/topic/452176-v35-or-v36/#findComment-7452516
Share on other sites

Fyi the dreaded CVT gearbox was only in 2001-2003 GT-8 sedans.

I am fairly sure the CVT was available at least until 2005.. possibly through to the end of the V35 sedan run in 2006.

EDIT - yep.. 2006 - https://www.tradecarview.com/used_car/japan%20car/nissan/skyline/15080873/

Edited by sonicii
Link to comment
https://www.sau.com.au/forums/topic/452176-v35-or-v36/#findComment-7452523
Share on other sites

So was this some approved used Nissan import vehicle? Like the Toyota Signature?

I had been lead to belive that these were all tip top vehicles.

Excellent work on hanging out fro the V36 as well... :yes: any pics?

Link to comment
https://www.sau.com.au/forums/topic/452176-v35-or-v36/#findComment-7459581
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, I started this repair and got as far as "fixing" the holes with some fibreglass. God all those years working on boats came back quickly. I decided I'd reach out to some rust guys just to see what they would say about it. I came across a guy about 40 mins away and went to see him. He said the windscreen needs to come out, that there might be some more bits around the windscreen and he'd quote them at the time. But his quote was $300 to remove and replace windscreen and $3k for the damage he can see. He said he could respray the roof for $1200 and the bonnet for another $800 (somebody has previously rattle canned it, its horrendous). This is $5300 + any small additional bits. It's a lot, I get that and the name of one of my fave youtube channels 'Not Economically Viable' comes to mind.  I'm not being financially rational, but I've taken him up on the quote. He's opening a new shop in November with more room, so we're waiting for that. I'll leave the currently missing headliner out until then. I'm looking forward to it being fixed and having the paint looking nice again (lots of clear coat issues on the roof too). / flame suit on.
    • Oh and some up-and-comings; New rear drivers wheel bearing. I'll do that this weekend while the diff is out. The car is already up and the d/c axles and missing exhaust will help with space. This is the last bearing for me to do and I've been dragging my feet on it. I also have some new EBC blue stuff pads for the car and some new brake fluid. I haven't ever flushed the fluid in this car and looking forward to it. I have 600 degree fluid to put in. Not exactly "race fluid" but better than the typical stuff I have been using.
    • A proper clutch/plate type mechanical diff with quite a lot of pre-load and high locking % is better for drifting. Much more consistent in its behaviour. A helical can be annoyingly vague and inconsistent in how it responds under the sorts of abuse found in drifting.
    • Some updates here. I pulled the entire interior out, minus some trim to respray the seats with Colourlock dye. It turned out really nice though I accidentally let the dog in the car after and she scratched up the front seat.  This is what it looked like before, the colour was just washing out everywhere but thankfully the leather was in good nic. Then after the respray   And after the bloody dog jumped in The headliner is out waiting to be retrimmed, but it will stay out now until Nov - see why below. I replaced the stereo/headunit with a period-styled Android headunit. I have no after pics, but I'll get some. This is because of the missing pixels. I tried to fix this twice with replacement ribbon cables but couldn't. Also the bluetooth interface I'd bought for this was crap. Then there's the rusty roof. Pics and info in this other thread. I have decided to get this repaired professionally, but I'll update that thread. This is why the headliner will stay out for now. I'll be getting the roof and bonnet resprayed at the same time the rust is fixed. I also had an interesting issue with my drivers door lock.  For a small period I was having issues getting any 12v power to the car - I mean *any*. It would have no dash lights, nothing. It happened while I was at the shops and I couldn't get in the car. So, we had 2 problems. The most pressing here is that I was locked out. I have only a single physical key hole on the car, the drivers door and no amount of turning would unlock the car. Surely it doesn't need power for this? The second issue is why am I losing all power periodically, The battery isn't dead, its almost like the battery isn't even there. Two issues that were surprisingly easy to fix. You fellow BMW over-engineering lovers will appreciate this. The lock in the door has 5 states; mechanical lock, electric lock, neutral, electric unlock, mechanical unlock achieved at -90 degrees, -45 degrees, 0 degrees, 45 degrees and 90 degrees. Although, the unlock is towards the front of the car, so opposite for LHD countries. Sticking the key in and turning 45 left or right is what is used 99% of the time. It activates the central locking etc. 90 degrees is for dead battery access and, obvs, only un/locks the one door. But because the mechanical lock is never used and is 27 years old, it seizes up. I was totally unable to turn the key far enough to get to the mechanical unlock (At the time of locking myself out, I didn't even know this was a thing). I eventually did it with some vicegrips and teflon spray.  I made a quick vid for other E39 peeps.   The battery issue is totally new to me also - It wasn't making sufficient contact between the post and the terminal. The terminal was bolted on tight, but the car wouldn't have power. After checking the battery with my multimeter I accidentally contacted the terminal and the battery post and the car got power. The battery was only a few years old and in good condition. I cleaned the post and the terminal with a wire brush, bolted it back on tight and never had the issue again. I'm still surprised that despite having solid contact it didn't work. Also, the car was getting Warragamba sized pools of water in the back when it rained. My initial concern was another rust problem. But when I went out on Weds while it was raining and while I had no headliner in I could see a steady stream of water coming through the roof mounted aerial. As this aerial is for the (now removed) car phone I pulled it out and whacked a blanking grommet in the hole. It seems fine now. I'm thinking I might get the hole permanently filled when the rust is fixed. Moving forward and things in progress; The tailgate needs some attention. I have taken all the trim off to clean it all and address some small rust spots. I have partially done all of this but I'll finish it up hopefully this weekend. As all the trim are now entirely devoid of trim clips I have bought a heap of strong velcro and I'm hoping it does a good enough job as any of this trim in good condition is super expensive and usually in Europe as we dont have many of the wagons here. Suspension and brakes!!! This is exciting. In the front; New control arms New sway bar links New lower Eibach springs (the only modification I'm planning on this car) M Sport shocks (these came with the car and will replace the longer shocks in the car) New top mounts Used 540i calipers (stock brakes suck!) New 540i disks and pads (22x296 mm for 528 and 30x334 mm for 540i) New front wheel bearings (thank all that is holy for bolt on bearings!) Annnnd in the back; New control arms New sway bar links Adjustable air suspension arms (fool the car into what the current height is so the self levelling suspension can match the new front ride height) New ball joints I'll also be doing a brake fluid flush while I'm in there. I'm planning on switching the car over to the 16's that came with it so I can clean up and respray the M Sport 17's. They've lost a lot of colour over the years and have some gutter rash. None of this will start until the E90 is back.
    • You mean you will regret it for drifting duties? I don't quite follow.
×
×
  • Create New...