Jump to content
SAU Community

Rb25det Neo Needs Some Revs To Help It Start?


DoseVader
 Share

Recommended Posts

Hi Guys,

So basically I had 550cc injectors, Z32 AFM and a highflow installed in my r34 and ever since getting the car back from being tuned while starting the car i need to give the car some revs while turning the key to get it stated, the warmer the car the more revs that are needed to get it started. Any ideas what might be causing this, I am really hoping it's just a shitty tune as the car was never doing this before?

I am thinking about getting the car retuned in a couple of weeks at a different shop but just want to see what other people think to try eliminate other factors first.

Link to comment
Share on other sites

Sounds like a shit tune as it wasn't doing it before.

I would ask who ever tuned it to fix it. But realistically I would probably just want to go somewhere who knows what they are doing. if they can't get it to start nicely I wonder how bad the rest of the tune is.

  • Like 1
Link to comment
Share on other sites

Injectors are brand new so too so fuel should be flowing pretty freely through them. Not going to name the shop that tuned it but they are ranked one of the better ones in QLD. Last time they tuned my car it was hitting boost cut in second gear and would not rev past 4,000rpm so I took it back but don't think I will this time will just change shop all together.

Link to comment
Share on other sites

You dont give it any revs if the car is running

I think you mean you need to press the throttle pedal

If you need to give it some throttle, then you need to give it more air, sounds like the car is to rich on start up

cranking enrichment needs adjustment

What ECU?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hi! Is it possible to use and swap the RB25DET/RB25Neo manual gerbox on to my RB20DE Neo engine with an automatic transmission?
    • my current daily - BiTurbo Diesel SQ5 8R with a remap and some light cosmetic mods. Which is sitting in front of my old daily that hasn’t been driven in 7 years now, home to numerous redbacks no doubt. MK4 Golf GTI with a boser hood extension, air ride airbag suspension, factory RHD Xenon’s from the Japanese R32 and stubby electric mirrors (also from Japan) sitting on custom made 18x10” Work Meisters for the golf’s bolt pattern and offset. one day I’ll revive it as a project, pull the engine out, put some forged bits in, chuck a big turbo on it and tune it to somewhere around 250kw and call it a barn find to make millions off YouTube views. Till then, it is a good breeding home for redbacks and the boot is good for storing my Christmas tree for 11 months of the year.
    • Thanks for jumping in guys, suggested @Sbluatx post here for help. Was hoping one of the guys with a RWD stages could confirm if the tank was the same as the AWD one
    • I got another MAF and installed it. Idle misfire was still present. Finally got the tank low enough to refuel and did so. Did a short drive to warm the car up and no issues, pretty short drive. Going to attempt soon to take a longer drive to see. I don't think the MAF fixed it if anything, definitely thinking it was fuel related. As soon as I put fresh fuel in the car felt so much better. But, still need a longer test drive to verify. I'll report back once done.  I'm definitely going to be getting monitoring and tuning parts soon as my next upgrade (decided on the link after talking with my tuner), just been real tight with just purchasing the car and sudden onset of issues. I've also ordered a new exhaust stud kit and gasket to fix that obvious problem. Once it's back up to par I'll start with the goodies
    • Meant it’s 2WD. And my tank is cracked.  
×
×
  • Create New...