Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

What do you mean sneaky?

I ran a hooker aero chamber and a Berkeley straight through at the rear. Was under the legal vole by a fair bit, no drone and flowed over 300 rwkw.

Research exhaust design. Two mufflers the same don't do much more than one. Fit the biggest mufflers you can fit. Look at branch resonators if you have a particular frequency drone you want to cancel.

I tried a few combos until I was happy with the result.

That exhaust system in the pics looks identical to what I have, but mines 3 1/2inch and a 3inch large oval Xforce muffler on back and is perfect, sounds quiet enough and on boost nice...

the muffler I have snakes inside the muffler and works great.

heres a brief clip, pretty quiet, got loose in first 3 gears lol

Edited by AngryRB
  • 2 weeks later...

I can supply either a 3" or 3.5" muffler / resonator combo without any stepdowns that have max flow and a deep , quieter sound. AES is the name. If you want to go quieter check out active kits at www.activeexhaustsystems.com.au

Fujitsumo twin 2.5" is reasonably quiet. Not that you can buy it new anymore. Because it is twin 2.5" it has good ground clearance.

I've had one on the car 7 years and police pull me over probably 10 times in that period, at least. Only comment I have had from them on exhaust is that it sounds "reasonable".

Edited by simpletool

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Started sifting thru my brakes to decide which ones I will run on Clem   Made me think I should just put them all on Silver...for when brake fade just isn't an option   Should be able to bump rotor up from 343x32 to 348x36 off Supra. Not sure if the Supra annulus is right for the Alcons or APs but trying g to find a used Supra\M4 rotor to test fit The Alcons seem to gain 1-2mm clearance which all helps  
    • So car is getting a few mods to the cage and some jacking points welded in Meantime Ol Silver gets a new gearbox and shiny clutch.  Old Box is being set aside for Clem  
    • Probably speedometer itself if the odometer is ticking. If the needle is stuck from a bit of grease or something that can cause it to stay at 0. Or a cracked solder joint in the speedometer can do it too.
    • Thanks Fella’s   to take this off topic and to elaborate a bit more. I have an rb25/30 going into a r32 GTST.. expected to make around 600-700hp. Would you?   A) R34 GTT box   B) CD00#?  I’ve seen a few posts about the CD swap and sounds fairly involved with making it fit etc but if it’s worth the work then I’ll go that way
    • Lower at the hubs. Funny I forgot to mention that part. Do this pull here I turned the camera off too soon but the graph shows a drop at the top and that was because the pipe from the turbo blew off. The tuner said we could’ve made possibly another 15 whp. He also added if I switched to ethanol we could up the boost some more as well. I was comfortable capping it at the most of 20 pounds. Turns out the turbo pipe just needed a new worm clamp. Got home replaced that then did a third gear pull from 3k to 7200 rpm and the power was great to the top. I just got an ecu mounting bracket from IEE that I need to try and get everything to fit well. It’s a PITA to get the harness and ecu fit properly behind that kick plate 
×
×
  • Create New...