Jump to content
SAU Community

Recommended Posts

  • 8 months later...

Na, Jez just told me I can't run high boost like I wanted to.

Just fitted 570's and E-manage , he reckons the stock intercooler is holding it back.

I want to run over 20 psi but it's tuned at 16 as there's high risk of detonation.

219 rwkw though,on a safe tune , that was actually my goal.

It appears there's a fair bit more there if I want it, ... hmmm tempting :yes:

re: slim a/c fan.

Can I get any universal slim fan ?

Supercheap auto...

Any tricks I need to know about this install ?

cheers

Yes, any universal fan is fine.

No tricks; just make sure it's turning the right way.

Na, Jez just told me I can't run high boost like I wanted to.

Just fitted 570's and E-manage , he reckons the stock intercooler is holding it back.

I want to run over 20 psi but it's tuned at 16 as there's high risk of detonation.

219 rwkw though,on a safe tune , that was actually my goal.

It appears there's a fair bit more there if I want it, ... hmmm tempting :yes:

219 at 16psi? that's good. your mod list? i will meet Jez again later on this month

Edited by YangLIU

So looking at stock front bumper, only has 100mm slot for air to reach the intercooler.

Looking at the height of them they are around 300mm.

I'm thinking the front bumper restricts airflow .

Will the HDI GT2 pro really make a difference with the small air duct ?

Can't seem to find any front spoilers anywhere for M35.

Thinking of cutting a huge area to expose the HDI completely.

Anyone else done this ?

So looking at stock front bumper, only has 100mm slot for air to reach the intercooler.

Looking at the height of them they are around 300mm.

I'm thinking the front bumper restricts airflow .

Will the HDI GT2 pro really make a difference with the small air duct ?

Can't seem to find any front spoilers anywhere for M35.

Thinking of cutting a huge area to expose the HDI completely.

Anyone else done this ?

i have GIALLA front bumper and side skirts in white color if you want :)

http://www.hirano-tire.co.jp/gialla2/gialla2-63.html

post-137368-0-58117000-1463049930_thumb.jpg

So looking at stock front bumper, only has 100mm slot for air to reach the intercooler.

Looking at the height of them they are around 300mm.

I'm thinking the front bumper restricts airflow .

Will the HDI GT2 pro really make a difference with the small air duct ?

Can't seem to find any front spoilers anywhere for M35.

Thinking of cutting a huge area to expose the HDI completely.

Anyone else done this ?

I will soon have a m35 full aero kit for sale. [emoji6]

i don't think there is much difference if you can DIY with stock bumper for the lower grill. but i'd say aero bumper is much beautiful.

what i am worry about is the big FMIC will block air flow to the poor radiator. i saw the highest temp on stock intercool is 101-102C when hot day then it will go down after the small fan working.

after fit HDI FMIC with 2 thin fan running, i saw 104C degree on hot day and i don't know when will it go down if keep stuck in traffic.

also i will put a big square custom number plate on front bumper to block the lower grill more :rofl2::rofl2:

post-137368-0-48178700-1463094050_thumb.jpg

Edited by YangLIU

i don't think there is much difference if you can DIY with stock bumper for the lower grill. but i'd say aero bumper is much beautiful.

what i am worry about is the big FMIC will block air flow to the poor radiator. i saw the highest temp on stock intercool is 101-102C when hot day then it will go down after the small fan working.

after fit HDI FMIC with 2 thin fan running, i saw 104C degree on hot day and i don't know when will it go down if keep stuck in traffic.

also i will put a big square custom number plate on front bumper to block the lower grill more :rofl2::rofl2:

My engine temps did not change from running the stock tiny intercooler to running an HDi kit.

Scotty's cooling mod, and a larger capacity radiator will improve the cooling system's ability to shed heat.

IMO; the OEM (quite noisy I agree) is far superior to thermo fans for heat management.

I've run a number of different setups using high capacity fans, and custom made shrouds to ensure efficiency, and nothing works better than the stock Clutch fan.

Dolphin front bar for NM35 is unmatched for airflow.

I did notice an improvement in cooling system performance when I changed from the stock "smiley face" front bar to the Aero Kit front bar.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...