Jump to content
SAU Community

R33 Gt-r Handling


Recommended Posts

Hi all, not sure if im posting in the correct place, but i have an r33 gtr. i dont drive it very often but when i do the car feels very weird in the rear, unstable and seems to feel as though the rear is "walking out". the hicas seems to be working fine subframe bushes "appear" to be fine also tie rod ends etc are fine. iv'e tried a few wheel alignment settings, currently 1mm toe in rear 1mm toe out front. im runnning mines esca street coilovers and thats all as far as suspension items go. it doesnt feel normal at all, iv'e driven other cars with hicas before and owned an r33 gtst for 5 years previously, neither felt like this car. Anybody else had this problem? fixes? etc. cheers

Link to comment
Share on other sites

Hi all, not sure if im posting in the correct place, but i have an r33 gtr. i dont drive it very often but when i do the car feels very weird in the rear, unstable and seems to feel as though the rear is "walking out". the hicas seems to be working fine subframe bushes "appear" to be fine also tie rod ends etc are fine. iv'e tried a few wheel alignment settings, currently 1mm toe in rear 1mm toe out front. im runnning mines esca street coilovers and thats all as far as suspension items go. it doesnt feel normal at all, iv'e driven other cars with hicas before and owned an r33 gtst for 5 years previously, neither felt like this car. Anybody else had this problem? fixes? etc. cheers

1mm toe OUT front - geee, put it 1mm toe IN and you'll be sweet.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • A31 is pretty much the same thing without HiAIDS I mean CAS, no improvement lol. Not to late to send it.
    • Thanks for all the replies! I also wanted to ask if wheels that were fitted on Ford Falcons would fit the 350GTs as well? In the area I'm at there aren't that many options for secondhand wheels and new ones here are way out of my budget. From what I've seen, most of the wheels that are available that were fitted on Ford Falcons have an offset of +33 to +36, with a centre bore of 70.5mm whereas the stock 350GT's ones are 66mm, can't seem to find any hubcentric rings that fit that difference though. 
    • 215/45/18 tyres are probably a little on the low side compared to the factory tyre, it should be closer to a 245/45/19, which will get you about an extra 11mm of height, and should make you speedo read a bit closer to reality. 245/45/19s will be a bit too far the other way and you risk a speeding ticket as your speedo might read slower than your actual speed.  245/40/19s would be correct if you are going to 19in rims, they will give you a similar total diameter to the 245/45/18 tyres.  
    • That's something I forgot to put in my list. The aggressive anti-squat in R32 is a f**king menace. I still need to decide if I'm going to drag the subframe out of my car and weld in the GKTech corrector kit. The main reason to dither is the need to switch to spherical joints in the lower arm to account for the twist induced in the rear pivot caused by lowering the front pivot. And yes...we do put better subframes in R32s, and I wish I'd gotten an S14 one instead of an A31 when I did the "take off and nuke it from orbit" HICAS delete all those years ago.
    • I have been looking at some setting on the alarms for the Q60 and what buttons do and so and also been looking for details on the alarm in my V37 which is a standard issue with the car. settings like window roll up and a few others seem to not work at all. i cant seem to find exact info on V37 alarms so Q60 is all i can really go off i have not tried 400Z alarm settings or info yet so that will be next. any one got like a sheet of info on the alarm system in the V37 as all my documents are in japanese but i thought the system would basically be like standard through similar models? 
×
×
  • Create New...