Jump to content
SAU Community

Recommended Posts

only considering selling or swapping due to baby on the way and in need of something with four doors. For reference, only looking to swap for a manual 03-05 wrx wagon or sedan, or a manual mitsubishi legnum. cash price is 11,500 firm no offers please. rego till 8/5/15.

mature mechanic owner I'm fussy with all my cars mechanically and aesthetically.

basic rundown.

'93 r32 gtst in gunmetal. paint is amazing.

ENGINE:

-series 2 rb25det 160psi across all 6

-rb25det 5 speed

-op6 turbo running 10psi

-walbro in tank fuel pump

-3" turbo back exhaust with varex cannon

-blitz return flow fmic painted black

-nismo engine mounts

-gates racing timing belt kit incl. water pump, rocker cover gaskets and tomei poncams fitted within last 1000km

-hks intake with pod inside factory airbox.

-nistune with base maps tweaked by toshi

DRIVELINE:

-exedy heavy duty clutch

-nismo big bore clutch slave cyl

SUSPENSION AND BRAKING:

-bc gold coilovers

-all adjustable hard race arms front and rear

-r34 gtr rotor upgrade with brand new rda rotors and remsa pads fitted in last 1000km

- genuine SSR koenig 3 piece wheels 18x8.5 +28 front and 18x9.5 +23 rear with 235/40/18 hankook tyres all round less than 1000kms old.

INTERIOR:

-very clean and stock bar an omp steering wheel with nrg quick release

Have yet to find a 32 gtst with factory paint this clean, a mint interior and just all round cleanliness like this one. they're getting rare. There may be more that i have missed, most likely actually. but thats mostly it. located penrith area western sydney. contact zach on 0433 652 959. cheers!

10959506_818085384929673_179400575228298

10984478_818085681596310_334344036345238

10959319_818085871596291_368105827566363

10959690_818085571596321_877331144191995

IMG_2296_zpsfa952a80.jpg

Edited by the_wolf
  • Like 1
  • 2 weeks later...

aircon works i regassed it myself about 2 weeks ago (am a qualified mechanic and automotive electrician)

only dyno sheet i have is 181kw when it still had the rb20. it basically feels like every other rb25 that has the same bolt on mods. hazard a guess at somewhere around the 200-210kw mark. the end figure isn't the interesting part anyway compared to the shape of the graph itself...

I only asked dyno figure because it has a nistune, was wondering if was tuned properly on a dyno or just on the street.

I wouldn't expect much with those mods and that turbo,but I have seen too many engines destroyed from dodgy tunes.

Also you said it had cams fitted 1000kms ago,seeing as it hasn't been dynoed, has it been checked with a wideband?

Edited by FBOOST

yes it has been checked with a wideband on the street. toshi did the initial tune on the nistune before the poncams and all is safe since they've been fitted. my current tuner(who is a very good friend of mine) is extremely good and has been tuning cars to an extremely high standard well before i was born. (which was 26 years ago)he knows his shit.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
    • I do have loctite 243 and 246 and a few more models. I could drill it now in place and make new threads for m12 and order an4 - m12 coupling and fit that to the turbo. Run a braided hose to the EBC which I could get a an4 to 1/8npt 
    • So M12 and sealant should be fine?    NPT ” because that’s what I had and what I could get atm. 
    • Wouldn’t touch par if they gave it to me. You need to ask how much power you’re looking to make and then add about 50% to it because that’s what you’ll end up making  The factory box says no more at about 350kw or so, the upgraded synchro boxes won’t handle much over 500kw for long and at that point you’re looking at an auto or dog engagement manual,  once you’ve gone dog engagement you may as well go sequential, they cost a little bit more but it’s worth it  also while you’re at it you should upgrade the transfer case with 10 friction plates 
×
×
  • Create New...