Jump to content
SAU Community

Highing flowing Injectors Good or Bad??


Recommended Posts

well I have heard of hiflowed injectors being checked and they had a huge difference in flow for each injectors if you can't afford the proper injectors you can't afford the up grade. raising the rail pressure will get you a higher tolerance of power I would do that b4 hi flowiing injectors or even use r x7 injectors as tony said.

there is no cheap way to get performance

btw note you said the approx flow rate is 590 cc you buy a nissan sard apexi or denso injecotr and they tell you exactly what they flow not approximates.

how big is your turbo stock injecotrs can support p 400 hp @ the fly wheel when the pressure is raised

meggala

Guest darrinspencer
well  I have heard of hiflowed injectors being checked and they had a huge difference in flow for each injectors if you can't afford the proper injectors you can't afford the up grade.  raising the rail pressure will get you a higher tolerance of power I would do that b4 hi flowiing injectors or even use r x7 injectors as tony said.  

 

there is no cheap way to get performance

 

btw note you said the approx flow rate is 590 cc you buy a nissan sard apexi or denso injecotr and they tell you exactly what they flow not approximates.

how big is your turbo stock injecotrs can support p 400 hp @ the fly wheel when the pressure is raised

meggala

They are 590cc each. was told they would be within 1cc of each other. I should not have used the word "approx"

The same guy told me to be aware of Sard injectors from his experience he has had too many failing to reach there specified CC rating.

The only RX7 injectors that are side feed for the rb25 are 13b S6 or cosmo or 20B primaries.

Try finding them under about $200 each!!! second hand $1200 set of 6. I have.

To use top feed rx7 injectors requires a new fuel rate etc. more cost.

I am actually seriously considering going down this path, I can apparently get it done for around $200 for all 6 injectors through a connection I have.

When I get around to having it done, after I will get them flow tested and post up the results. That way we can have some solid data on the benefits, if any.

Adam

Well, according to SK in a previous thread, proper hi-flowing costs about $200 per injector -- a little less if labour is free -- and on that basis its cheaper to buy new ones.

http://www.skylinesaustralia.com/forums/sh...19&postcount=15

Haven't been able to find the thread warning against hi-flows yet (as per Megalla's post).

LW.

They are 590cc each. was told they would be within 1cc of each other.

I seriously doubt that :( :Oops:

The same guy told me to be aware of Sard injectors from his experience he has had  too many failing to reach there specified CC rating.

Wow... A member of the automotive industry putting a bad word on a competitor's service/product?!?! Well I'll be!!!!!!!!!

Bottom line is, high flows are made by attacking the injectors with a drill. Ask him for a 100% MONEY BACK guarantee of a 1cc difference across the range of injectors, to be tested by an independant source, and see what he says :)

Even new injectors have upto a 5-6cc difference across the range. You can tune this out via a programmable ECU like the PowerFC, or fit the higher flowing ones in the leaner cylinders.

If your budget can accomodate new injectors, go for it...

If not, I suggest second hand injectors of your required size and have them ultrasonically cleaned and flow tested...

If you're building an "N1" spec car like Dundan, then I guess you have no choice but to take a gamble and get your injectors drilled out, but that would be the last option on my list :spcow:

Guest two.06l
The same guy told me to be aware of Sard injectors from his experience he has had  too many failing to reach there specified CC rating.

so that comment would mean that all nippon denso injectors are unreliable as the brand name SARD merly applies to the box they came in .Nearly all aftermarket japanese injectors are made by nippon denso to be resold by these companies eg.hks sard nismo etc

so that comment would mean that all nippon denso injectors are unreliable as the brand name SARD merly applies to the box they came in .Nearly all aftermarket japanese injectors are made by nippon denso to be resold by these companies eg.hks sard nismo etc

Thats a very good marketing tool, call everyone elses product shit and then claim 1cc difference between the products you butcher/highflow :cheers:

Guest two.06l
Thats a very good marketing tool, call everyone elses product shit and then claim 1cc difference between the products you butcher/highflow :D

someday people will realize that this industry is full of fallicies and old wives tales(read:bull5hit).Unless i see or prove something with my own eyes or have the info coming from a trusted and/or reliable source it cannot be trusted. There is nothing like the self satisfaction of proving results for yourself.

Guest darrinspencer
someday people will realize that this industry is full of fallicies and old wives tales(read:bull5hit).Unless i see or prove something with my own eyes or have the info coming from a trusted and/or reliable source it cannot be trusted. There is nothing like the self satisfaction of proving results for yourself.

The company offering to do the work are a "Advanced Performance Centre" without mentioning names

They build plenty of fast cars to PROVE their work

9.97 GSR and

Australia fastest front wheel drive CRX

Just to name a few

So I can only assume they know what they are talking about.

someday people will realize that this industry is full of fallicies and old wives tales(read:bull5hit).Unless i see or prove something with my own eyes or have the info coming from a trusted and/or reliable source it cannot be trusted. There is nothing like the self satisfaction of proving results for yourself.

The very same can be said about internet forums.....

Adam

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...