Jump to content
SAU Community

Charles' R34 Gtt - C89

Charles89
 Share

Recommended Posts

Charles89 Grand Master

Charles89

Posted
  • Author
Posted

Mountain run? What's that?

When I owned my boaty NA R33, I never really went to any mountainy or hilly cruises with lots of twisties, since I know the stocky whale won't be able to handle it (no offence to anyone driving a R33!). So I didn't really have any experience in hilly driving.

One day after TAFE, I jumped on SAU just to see that SAU VIC was running a Mt Buller 2 day cruise (for those who don't know Mt Buller is, Mt Buller is a town located in the Shire of Mansfield in the Alpine region of Victoria. The town is located approximately 200 kilometres east of Melbourne on the slopes of Mt Buller. In short, it's where people go to ski in the winter months). Without having any second thoughts, I put my name down and paid for the accommodation and dinner that was provided ($100 all up - which was a bargain!).

(After looking back at that thread, the noob me asked "Do we need chains to drive up buller?", just shows how much I knew back then haha...)

Anyway, the cruise comprised a lot of driving from Melbourne to Mt Buller, some fun driving going up and down the mountain and then back to Melbourne the next day. Have to say... It was such an amazing experience with some quality bonding time with the car, since I only owned it for 3 months. And I must say, as it was, the R34 handled so much better than the R33, even with just Tein Mono Flex and front Cusco camber arms. It drove like a dream (compared to what I had), carried me through the corners and straights, never realised mountain roads were so much fun!

From that point on, I knew the R34 was worth modding.

This is what Mt Buller looks like in the winter.
019.jpg

Having a blast with the R34!
020.jpg
021.jpg

After a couple of runs, the R34 was just as exhausted as I was, and in fact, it was the first time I had the sensation of "brake fade". By the time I got to the bottom of the mountain, smoke was pouring out from the brakes and I was adviced to roll the car onto a flatter surface so I can let the brakes cool down without the need of the handbrake.
022.jpg
023.jpg

  • Like 1
  • 4 weeks later...
  • 2 weeks later...
Charles89 Grand Master

Charles89

Posted
  • Author
Posted

Not having a lot of luck...

After having such an awesome weekend at Mt Buller, only to come home to find out there was a massive crack on my windscreen, most likely happened on the way home on the freeway. I was fairly shuttered at the time (pun intended), having something damaged on the R34 for the first time... But rest assured, it wasn't going to be the last time...

On the plus side, I did get a brand new windscreen that has a little strip of tint at the top, which I think it looks better than the OEM windscreen.

024.jpg

Unfortunately... The run of bad luck didn't just stop there...

One Sunday morning in December 2009, I was just about to head to work, it was pouring down that morning, visibility was close to being zero. There were cars parked on each side of my drive way, and as I was pulling out slowly, thinking there was no car coming. A girl in her Ford Fiesta just flew around the corner and did not bother to try swerving to avoid me. Ended up clipping my front bar and bonnet.

I was devastated, having an accident in the R34 only 4 months after owning it. Worst part was, at the time, I only had 3rd party fire and theft, as I couldn't really afford full comp with JustCar for $3,000, considering I didn't work full time and was still a uni student. So I basically had to fork out $1950 for excess and just live with the scars on the 34 from the accident.

I decided not to get the 34 fixed, not yet. As it was only cosmetic damage. But my plans to make the car looking nice and pretty, has taken a step backwards...

025.jpg

026.jpg

Charles89 Grand Master

Charles89

Posted
  • Author
Posted

Gotta wrap it all!

April 2010, it's been 4 depressing months since the accident happened. Although the car is still relatively new in my possession, it just doesn't feel that new anymore, perhaps the accident has really demotivated me. As I felt, no matter what I do to the rest of the car, the front bar and bonnet is still wrecked...

BUT, I still tried to motivate myself, realising I can't just leave the car like this for the rest of my life.

By taking a baby step, I wanted to rectify the problem of the black paint chipping off from my intercooler piping, as it was slowly becoming more and more noticeable. Knowing that if I spray it again, it will just get chipped again, so I thought... Why not just wrap it in CF vinyl?!

027.jpg

028.jpg

Charles89 Grand Master

Charles89

Posted
  • Author
Posted

To brighten things up!

September 2010, 9 months since the accident and 5 months since I last did anything to the car. I can slowly feel the passion coming back, hands getting shaky, kind of itching for the next mod.

Back in those days, HIDs were not as common as they are now. Even though my 34 came out of the factory with Xenon headlights, they were unfortunately ripped out during compliance, as it was one of the earlier 34's to get into the country, so they had to do it right. And sadly, they did it too well...

They didn't just disconnect the Xenons and put a H1 bulb in, they chopped every single loom from the ballast while fabricated a plate to suit a H1 bulb... So there was no way I could just rewire the ballast to get the D2R Xenons working again... Decided to take the cheapest and quickest option, drop in a H1 HID kit. In which, in hindsight, was pretty inconsiderate and silly, because the reflectors in the housing were designed to reflect light from a D2R bulb, and not H1, so it would have glared and blinded on coming cars. Lesson #2 kids, don't install random headlights into your car, if it's not meant for it.

Having said that, it did look pretty cool at the time and definitely lit up the road better.

029.jpg

030.jpg

031.jpg

While I was at it, I also polished up the headlights with a bit of toothpaste, yes toothpaste, and it works!

032.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Marek
      Hi everyone.

      By Marek · Posted

      Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • ARB26
      S1 Autech 260RS Wiring Diagrams

      By ARB26 · Posted

      Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • DanMac34
      R34 Speedo not working after manual swap

      By DanMac34 · Posted

      Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...