Jump to content
SAU Community

Recommended Posts

Car is gone so time to clean out all the parts. Prices negotiable and postage is at buyers expense from QLD. Contact via PM for more pics/info.

GTT Nistune package $550 – everything you need to get the most out of your bolt on mods. Never got around to installing this in my car, but all parts were purchased in working order.

R34GTT Manual ECU

Type 4 Nistune board and cable
Turbotech manual boost tee
Blitz 52mm mechanical boost gauge and cup
https://www.dropbox.com/s/zltyv6tx49ptvz6/2015-03-30%2020.48.21.jpg?dl=0

R34 plastic eyelids $80 – in sonic silver. Slight bend in one as per picture, does not affect ‘performance’. Affix with double sided tape.

https://www.dropbox.com/s/tbx9o9c0vok64k7/2015-03-28%2015.22.57.jpg?dl=0

R34 coupe front and rear standard bumper $120 for both – in sonic silver. Front bar is off a GT so no SMIC vent. Both in good condition with a few scratches from being in storage

https://www.dropbox.com/s/lwre91y656wf3qr/2015-03-28%2015.21.30.jpg?dl=0

R34 sub box $50 - fibreglass, moulded to fit corner of the boot. Small hole as per picture. sold pending

R34 coupe LED Tail lights $150 – same as these. All leds working when last fitted. Plug and play

http://www.ebay.com.au/itm/99-02-NISSAN-SKYLINE-R34-GTR-LED-Tail-lights-GTR-GTT-RB-/221143857491?pt=LH_DefaultDomain_15&hash=item337d337953

R34 GTT stock wheels $150 – gutter rash on most of the wheels. Average rubber.

R34 GTT stock coilovers $50 – cracked dust boots, came out of car with <100thousand k’s and were working fine

R34 GTT stock front indicators and side repeaters $80
https://www.dropbox.com/s/du7i20nmdwyb7zo/2015-03-28%2015.23.28.jpg?dl=0

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/455244-r34-parts-clean-out/
Share on other sites

What would you be after for just the Nistune board and cable?

PM me an offer, will have to be compelling to split up the pack

R34GTT Stock airbox and snorkel $100ono also available.

Edited by sonnyQ

Car is gone so time to clean out all the parts. Prices negotiable and postage is at buyers expense from QLD. Contact via PM for more pics/info.

GTT Nistune package $550 – everything you need to get the most out of your bolt on mods. Never got around to installing this in my car, but all parts were purchased in working order.

R34GTT Manual ECU

Type 4 Nistune board and cable

Turbotech manual boost tee

Blitz 52mm mechanical boost gauge and cup

https://www.dropbox.com/s/zltyv6tx49ptvz6/2015-03-30%2020.48.21.jpg?dl=0

R34 plastic eyelids $80 – in sonic silver. Slight bend in one as per picture, does not affect ‘performance’. Affix with double sided tape.

https://www.dropbox.com/s/tbx9o9c0vok64k7/2015-03-28%2015.22.57.jpg?dl=0

R34 coupe front and rear standard bumper $120 for both – in sonic silver. Front bar is off a GT so no SMIC vent. Both in good condition with a few scratches from being in storage

https://www.dropbox.com/s/lwre91y656wf3qr/2015-03-28%2015.21.30.jpg?dl=0

R34 sub box $50 - fibreglass, moulded to fit corner of the boot. Small hole as per picture. sold pending

R34 coupe LED Tail lights $150 – same as these. All leds working when last fitted. Plug and play

R34 GTT stock wheels $150 – gutter rash on most of the wheels. Average rubber.

R34 GTT stock coilovers $50 – cracked dust boots, came out of car with <100thousand k’s and were working fine

R34 GTT stock front indicators and side repeaters $80

https://www.dropbox.com/s/du7i20nmdwyb7zo/2015-03-28%2015.23.28.jpg?dl=0

Sub box and taillights gone, everything else available. make an offer

Edited by sonnyQ

Prices revised, willing to separate Nistune package. PM offers

GTT Nistune package $500 – everything you need to get the most out of your bolt on mods. Never got around to installing this in my car, but all parts were purchased in working order.

R34GTT Manual ECU

Type 4 Nistune board and cable
Turbotech manual boost tee
Blitz 52mm mechanical boost gauge and cup
https://www.dropbox.com/s/zltyv6tx49ptvz6/2015-03-30%2020.48.21.jpg?dl=0

R34 plastic eyelids $70 – in sonic silver. Slight bend in one as per picture, does not affect ‘performance’. Affix with double sided tape.

https://www.dropbox.com/s/tbx9o9c0vok64k7/2015-03-28%2015.22.57.jpg?dl=0

R34 coupe front and rear standard bumper $100 for both – in sonic silver. Front bar is off a GT so no SMIC vent. Both in good condition with a few scratches from being in storage

https://www.dropbox.com/s/lwre91y656wf3qr/2015-03-28%2015.21.30.jpg?dl=0

R34 GTT stock wheels $150 – gutter rash on most of the wheels. Average rubber.

R34 GTT stock coilovers $50 – cracked dust boots, came out of car with <100thousand k’s and were working fine

R34 GTT stock front indicators and side repeaters $50
https://www.dropbox.com/s/du7i20nmdwyb7zo/2015-03-28%2015.23.28.jpg?dl=0

R34GTT Stock airbox and snorkel $80

Also have an R34GTT AFM (pink label) in working order - $70

bump sat alone in a boggy marsh....

Will have access to wheels on Wednesday so will be bringing them to my house and posting pics.

All prices adjusted!


GTT Nistune package $450 – everything you need to get the most out of your bolt on mods. Never got around to installing this in my car, but all parts were purchased in working order.

R34GTT Manual ECU

Type 4 Nistune board and cable
Turbotech manual boost tee
Blitz 52mm mechanical boost gauge and cup
https://www.dropbox.com/s/zltyv6tx49ptvz6/2015-03-30%2020.48.21.jpg?dl=0

R34 plastic eyelids $60 – in sonic silver. Slight bend in one as per picture, does not affect ‘performance’. Affix with double sided tape.

https://www.dropbox.com/s/tbx9o9c0vok64k7/2015-03-28%2015.22.57.jpg?dl=0

R34 coupe front and rear standard bumper $90 for both – in sonic silver. Front bar is off a GT so no SMIC vent. Both in good condition with a few scratches from being in storage

https://www.dropbox.com/s/lwre91y656wf3qr/2015-03-28%2015.21.30.jpg?dl=0

R34 GTT stock wheels $150 – gutter rash on most of the wheels. Average rubber.

R34 GTT stock coilovers $50 – cracked dust boots, came out of car with <100thousand k’s and were working fine

R34 GTT stock front indicators and side repeaters $50
https://www.dropbox.com/s/du7i20nmdwyb7zo/2015-03-28%2015.23.28.jpg?dl=0

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...