Jump to content
SAU Community

Recommended Posts

10862455_801401346574935_115709750507784



After the success of SAU:NSW's South Circuit track day last year and the resounding feedback from the entrants we have secured another booking!

Okay, so here are the details:



DATE: Monday 24th August 2015

WHERE: Sydney Motor Sport Park - South Circuit

SCHEDULE:

6:00: Gates open

7:00 - 7:20: Drivers sign on - all drivers report to the main desk next to the pit garage, bring your licences with you

7.20am - 8:15am Scruitineering, if you're late you need to wait until the day has started so the rest of the group isn't held up.

8:30/45 Drivers briefing in the main room, Next to scruitineering garages.

9:00 - Group format beings, this will be run in an alternating timed/ un-timed format. This format allows for passengers/driver training in the un-timed sessions.

PRICE:

SAU-NSW members $250 per driver,

Early bird non-Members price $265 until 1st July

Non-Members after 1st July $280

per driver yes that means double entered cars pay twice. Why not become a member and receive member discounts. More info on membership can be found at www.saunsw.com.au


PASSENGERS:

$10 on the day after signing a waiver. Must be over 15 years and if under 18 years have parent or guardian permission. All Passengers must have full head to toe clothing and an approved helmet. This will be checked prior to payment once cleared you will be issued with a wristband and allowed out in un-timed sessions.

LICENCE REQUIREMENTS:

CAMS L2S or AASA club licence

Motorsport licence and current club membership card must be shown on the day at the sign in desk.

PLEASE NOTE ALL AASA and CAMS LICENCES MUST BE ACQUIRED PRIOR TO THE EVENT, APPLICATIONS CANNOT BE MADE ON THE DAY ANYMORE!! CHECK YOUR EXPIRY DATES PEOPLE!

How the day runs:



If you've never driven on a track before and want someone experienced to give you instruction and help with how to drive better, faster or safer, or even if you've done a couple of track days and just want to ask some questions (no matter how silly they may seem), we have this at no extra charge available throughout the day.


Firstly, when you arrive at the track, find a place to park and empty all loose objects out of the car. Ensure there's nothing loose in the engine bay and that there are no leaks, that your brake lights work and you have all your wheel nuts on and have tightened your sump plug etc. Next step is to go to the office and sign on for the day, take your licence with you and you will be given a scruitineering sheet. Once you receive that, it's time to drive your car to the scruitineering shed, it's the only building right next to the parking.


Your car will be checked to make sure it's safe to go on the track, and it will then be assigned a number which is your number for the day.


Once you've done all that, it's now time to wait for the drivers' briefing to begin (which will be announced on the loud speakers throughout the pits, and starts at 8.30am sharp).


Once the drivers' briefing is over, all the drivers are split into groups based on experience so that everyone is comfortable in their group. One group is then allowed on the track at a time for evenly-timed sessions. Once one group comes off, another goes on. This repeats until the end of the day with a short break around lunch so officials and helpers can get some food and drinks. Groups are small to ensure we have lots of space on the track. Groupings will be based on previous lap times and experience


That's basically it!

The only way to secure a spot is through sending in an entry form/email and payment through Eventbrite or Bank Deposit.

PAYMENT:

Please note there will be no refunds unless the event is sold out and there are reserves waiting.

Credit Card payments please pay through Eventbrite. Link provided below.
http://www.eventbrite.com.au/e/saunsw-smsp-trackday-tickets-15398229519

or Bank Deposit. (Please PM Crashdown once payment made)

SAUNSW bank details:

Bank - NAB
Branch - Marrickville
Account name - Skylines Australia NSW
BSB - 082 356
Account number - 546 393 766

Please put your FULL NAME in the description, eg "SMSP JOE SMITH"



ENTRY FORM:
PM Electronic entry details sent to crashdown on SAU forum

'Italics are for reference only'


Full Legal Name: (as entered on bank deposit)

Forum Alias:

Car Make:

Car Model:

Experience: (New to Track Days) (1 or 2 non-timed events) (multiple events with timing)

Times: (List track & official time, e.g. Wakefield 1:13 SMSP 1:08 etc)


One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general.

When attending one of Skylines Australia NSW events please try to:

* Be aware of surrounding environment and act accordingly.
* Drive courteously on the states roads as a true enthusiast should.
* Understand how important it is to maintain the good name of SAUNSW and thus, treat others accordingly.
* Any misbehaviour will not be tolerated and you will be asked to leave.


*** Details may change. check back regularly.
*** On the day please bring your Motorsport license and current membership card as we need to visually see it, We will have you fill out a entry form and waiver on the day. Your Eventbrite receipt is your confirmation of entry.
*** Supp regs will be put up closer to the date






Any Questions Just ask

See you at the Track

SMSP Supp Regs.pdf

1. Deka (E)
2. Urogue (NM)
3. Aggroman (E)
4. JLM
5. GTofuS-T (M)
6. Denis Chung (NM)
7. Liz (M)
8. Jacobidgaf (NM)
9. Fez25 (M)
10. Bazil_1 (M)
11. Michael's R33 (M)
12. BlackTemplar (M)
14. Fatz (M)
15. Jenna (M)
16. BunsenBurna (M)
17. ianjb (M)
18. Duff (M)
19. LukeGTR (E)
20. e-Dog (M)
21. blackjack404 (M)
22.
23. PN-Mad (M)
24. Udi (M)
25. Kila32 (M)
26. Quinnie (M)
27. WAGON_BOY (M)
30. Clinton (M)
31. niZmo_Man (M)
32. deongster (M)
33. Victory (M)
34. 34GeeTeeTee (VP)
36. r32-25t (M)
46. Applin (NM)
88. GTR32G (M)
90. Calsonic14u (M)
91. BakemonoRicer
133. Evil_Weevil (M)
222. stagea pete (M)
666. RiseofBrutality (M)
679. MrFijiGold (T)

Reserve list.

1.
2.
3.

*list updated 08/08/2015

  • 2 weeks later...

Starting to fill up. Not many spots left.

Non-member early bird entry closes soon.

Or even better become a financial club member and reap all of the benefits of cheaper Trackday entry, members only tech events, tyre discounts etc.

Starting to fill up. Not many spots left.

Non-member early bird entry closes soon.

Or even better become a financial club member and reap all of the benefits of cheaper Trackday entry, members only tech events, tyre discounts etc.

And multiple track day offers coming soon!! :whistling:

  • Like 1
  • 1 month later...

If you are a Financial member of the club, we have a special offer in the members section, for any member who has also entered our South Circuit day.

http://www.sau.com.au/forums/topic/457132-18th-october-smsp-north-circuit-interclub-track-day-limited-offer/

Spots are limited so get in now before they are gone.

  • 2 weeks later...

Damn, should have put my name down earlier.

Let me know if any spots become available.

Hi Liam, I will put you on the reserve list, that way if a spot come available, you will be the first offered.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
    • Also, I logged some data from the ECU for each session (mostly oil pressures and various temps, but also speed, revs etc, can't believe I forgot accelerator position). The Ecutek data loads nicely to datazap, I got good data from sessions 2, 3 and 4: https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-2?log=0&data=7 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-3?log=0&data=6 https://datazap.me/u/duncanhandleyhgeconsultingcomau/250813-wakefield-session-4?log=0&data=6 Each session is cut into 3 files but loaded together, you can change between them in the top left. As the test sessions are mostly about the car, not me, I basically start by checking the oil pressure (good, or at least consistent all day). These have an electrically controlled oil pump which targets 25psi(!) at low load and 50 at high. I'm running a much thicker oil than recommended by nissan (they said 0w20, I'm running 10w40) so its a little higher. The main thing is that it doesn't drop too far, eg in the long left hand fish hook, or under brakes so I know I'm not getting oil surge. Good start. Then Oil and Coolant temp, plus intercooler and intake temps, like this: Keeping in mind ambient was about 5o at session 2, I'd say the oil temp is good. The coolant temp as OK but a big worry for hot days (it was getting to 110 back in Feb when it was 35o) so I need to keep addressing that. The water to air intercooler is working totally backwards where we get 5o air in the intake, squish/warm it in the turbos (unknown temp) then run it through the intercoolers which are say 65o max in this case, then the result is 20o air into the engine......the day was too atypical to draw a conclusion on that I think, in the united states of freedom they do a lot of upsizing the intercooler and heat exchanger cores to get those temps down but they were OK this time. The other interesting (but not concerning) part for me was the turbo speed vs boost graph: I circled an example from the main straight. With the tune boost peaks at around 18psi but it deliberately drops to about 14psi at redline because the turbos are tiny - they choke at high revs and just create more heat than power if you run them hard all the way. But you can also see the turbo speed at the same time; it raises from about 180,000rpm to 210,000rpm which the boost falls....imagine the turbine speed if they held 18psi to redline. The wastegates are electrically controlled so there is a heap of logic about boost target, actual boost, delta etc etc but it all seems to work well
×
×
  • Create New...