Jump to content
SAU Community

Best Cams To Drop In For Hks Gtss Turbos On A 32 Gtr Getting 310rwkw With Standard Internals?

boobeedoobee
 Share

Recommended Posts

boobeedoobee Community Regular

boobeedoobee

Posted
Posted

Hey I know a lot of people will say stick with standard cams but I'm about to do the timing belt water pump and heater hose upgrade on my 32 gtr. I thought at the same time I will change my cam gears to adjustable and drop in some cams.. here is a little list of what my car has done to it;

Hks gtss turbos

Midori seibi dumps

Full exhaust

E85

1000cc injectors

Its getting 310 rwkw with standard internals

If anyone could recommend a good cam setup for this that would be great thanks

Anfanee Grand Master

Anfanee

Posted
Posted

Yes they are pretty minimal.

I would spend the extra cash on something more important.

But i didn't... So that statement is void.

Type B FTW!

r32-25t Grand Master

r32-25t

Posted
Posted

Type Bs are great as long as you're happy with a car that drive terribley down low for the benifit of it going wank wank wank at idle.

I thought so much of those cams I literally gave them away cause I couldn't justify taking anyone's money for them

  • Like 2
SiR_RB Grand Master

SiR_RB

Posted
Posted

How can type bs make a gtr with gt-ss drive Terribley down low

They already responsive as f**k ! I been in my mates before and after type bs noticed no difference down low

I should find out what gains he got with cams....

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Looking for someone with a R34 front bar

      By GTSBoy · Posted

      That looks good, but I think you're going to need much beefier side skirts now.
    • GTSBoy
      Most women will agree that parking is the most taxing part of driving

      By GTSBoy · Posted

      They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • GTSBoy
      new 1.5 LSD issues/concerns

      By GTSBoy · Posted

      I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • GTSBoy
      M35 Brake caliper replacement

      By GTSBoy · Posted

      Define "starting to fail". Wy not just rebuild them?
    • GTSBoy
      S1 rb25/s14 starting problem

      By GTSBoy · Posted

      Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...