Jump to content
SAU Community

V35 Car Computer

CucumberError
 Share

Recommended Posts

CucumberError Rookie

CucumberError

Posted
Posted

I've recently bought a 2001 Nissan Skyline V35 300GT and I'm looking at how to put a computer in it.

In my previous car (Toyota Mark II/Chaser X90), I had a Raspberry Pi in the boot. It powered on with the car (took ~30 seconds to boot) had wireless, decent USB sound card, USB drive with music etc. You could use an Apple device to AirPlay to it or use an iPhone/iPad app to control the media player installed on the Pi. The centre console perfectly fit an iPad mini in it, so it made controlling via wifi really easy. I'd mounted an iPad dock in the centre console so that the iPad charged. I just used Apple Maps for turn by turn GPS.

So, onto the V35. When I sold the Mark II I took the Pi etc out and kept it, with the plan of putting it in the Skyline, but now I'm thinking I might do it a tad nicer. I've come up with two concepts:

Idea 1: Put the Pi in the upper glove box where the MD stacker was, then mount a dock for an iPad mini in the coin pocket above the heater controls. Then when you're doing a road trip, just throw the iPad in, otherwise just use AirPlay from my phone to play music etc, pretty much the same system as was set up in the Mark II.

Idea 2: Mount an Intel NUC in the upper glovebox. Run Windows 8.1/Window 10 on it, have it running as a wireless hotspot so that iPad/iPhone can connect to it and play music via Airplay. When I purchased the car, the guy before me had purchased the pop up TV for the GPS stuff, so I've pulled that apart and thinking about mounting a 7" touch screen in place of the original screen, having a HDMI and USB cable running from the screen back to the NUC and then using the Windows 8 style metro apps for music, Windows Maps with a USB GPS receiver, maybe setup a USB camera as a reverse camera using the windows 8 camera app to see it etc.

I was then looking at the possibility of getting a printed circuit board made up for the GPS control buttons in front of the screen to do things like media control, a hardware Windows key to get back to the main screen, make the top row of buttons short cut keys to music, maps, camera etc.

I'm also of the understanding that if I'm using Windows, I could possibility get the OBD2-ish (I know it's not OBD2) details and feed them into the computer, making it give real time engine readouts while you're on the road, to get fuel usage etc?

Has anyone done anything like this? Any tips or advice?

<tl;dr I want to make my car into a giant Microsoft Surface. >

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/455863-v35-car-computer/
Share on other sites
PaulReeves.com - GPOWER.TV Community Regular

PaulReeves.com - GPOWER.TV

Posted
Posted

that my friend, sounds like a great idea

an idea i have no clue what to do but if you do figure it out make a DIY so we all can learn from your ways :)

Indeed :)

t5iv Grand Master

t5iv

Posted
Posted

I'm setting this up using an Android tablet with the assistance of Chris Rogers. Only stumbling block that I have is which tablet? I like installing custom ROMS and having full usability of the system. Planning on running everything from music to nav to live engine stats through it. ;) Can update with details when I get it set up.

CucumberError Rookie

CucumberError

Posted
  • Author
Posted

I've had a bit more of a play with things, and I've got the GPS screen stuff all pulled apart, but it seemed that it's still held together by the hinge. It's not a screw or a nut or anything, just some round thing with a weird flat edge on the top. Has anyone ever pulled the screen out of one of these?

I've found a few touch screens with HDMI and USB that I think will fit in the enclosure, I just need to be able to get it apart to see how much space is actually inside the screen casing. Has anyone done it before?

t5iv Grand Master

t5iv

Posted
Posted

I've had a bit more of a play with things, and I've got the GPS screen stuff all pulled apart, but it seemed that it's still held together by the hinge. It's not a screw or a nut or anything, just some round thing with a weird flat edge on the top. Has anyone ever pulled the screen out of one of these?

I've found a few touch screens with HDMI and USB that I think will fit in the enclosure, I just need to be able to get it apart to see how much space is actually inside the screen casing. Has anyone done it before?

Chris Rogers has. Apparently the screen size that you need is 6.4" or something strange. Really hard to come across.

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Speed Sensor replacement

      By joshuaho96 · Posted

      Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
×
×
  • Create New...