Jump to content
SAU Community

Forged Rb26 Plus -5s 410awkw Aftermarket Upgraded Gearbox

HKS26T
 Share

Recommended Posts

HKS26T Experienced

HKS26T

Posted
Posted

Hi all,

Bought the car but have my own setup to replace this package. Fresh, no track work. Tuned by unigroup built by west end

Engine

Fresh build by west end performance (only run-in and tuned) 86.5mm CP pistons

Manley rods

arp2000 rod bolts

linished r34 crank.

full supertech head with 1mm oversized valves.

Ports cleaned up.

brand new -5 turbos.

Comes with standard sump

No oil pump (setup for dry sump)

hks cam gears

tomei poncams (260 degree 9.15mm lift).

twin hks pod filters

hks dump pipes

$9k

Gearbox

Looks to me like a Yokohama auto gallery box.

Had one in the past, essentially a os gearset. Completely overhauled by Mark berry and Includes multiplate clutch

$4k

Link to comment
Share on other sites
HKS26T Experienced

HKS26T

Posted
  • Author
Posted

Is the box a 5 or 6 speed? Straight cut or helical? Ratios? Kms since overhaul?

5 speed, helical cut.

Kms - not sure (a couple of track days I belive) have receipts for overhaul new syncros

Ratios unknown (I'll confirm with previous owner)

Jim berry clutch (I'll confirm whether it's a single or twin)

Link to comment
Share on other sites
  • 3 weeks later...
  • 1 month later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      Don't leave a wrapped skyline out in the sun

      By MBS206 · Posted

      I could show you guys photos of wrap having been removed properly, and where the wrap was removed, paint underneath is perfect. Sections of the vehicle didn't have wrap on it, and in those areas, the paint work is destroyed because of how long it had been sitting in the hot QLD sun for many many many years. Wrap even still looked decent. Good quality wrap, and removing it properly shouldn't rip off the paint work, unless the paintwork was already shot to pieces before hand.
    • jacobzking
      R33 Window motor replacement (not switch or amp)

      By jacobzking · Posted

      Any write ups on replacing the window motor?  I've never messed with them (or window regulators) before.   Ever since I've had the car, the driver window would roll down just fine, but most often I'd have the try a few times to get it to go up.  As soon as it started to go up, it always goes up smoothly and quietly.  Seemed like a bad switch.  But now, its stuck in the fully down position and won't come back up.  I get =12/-12V coming out of the relay/amp when pressing the switch up/down.  So the switch and amp are working.  Just a bad motor.  I've also applied 12V directly to the motor and nada.   Any help on replacing the motor?  Can the glass and regulator stay in, and only replace the motor?  Or not possible?  Thanks!!!
    • GTSBoy
      Rear suspension upgrades

      By GTSBoy · Posted

      You are wrong. That's just Whiteline going along with the incorrect slanguage of the sheeple userbase. They are only correctly known as anti-roll bars. They are only incorrectly known as swaybars. They do do anything to prevent "sway". The swaybars that are fitted to trailler hitches do prevent sway. In the trailer. And they do not look like anti-roll bars. So, take your incorrect infopinion away.
    • morboost
      Rear suspension upgrades

      By morboost · Posted

      wrong wrong
    • morboost
      Rear suspension upgrades

      By morboost · Posted

      https://whiteline.com.au/front-and-rear-sway-bar-vehicle-kit-to-suit-nissan-skyline-r32-awd-9986-bnk009.html whiteline calls them a sway bar, the topic of this post.
×
×
  • Create New...