Jump to content
SAU Community

Pnm35 Manual Conversion

tomo123
 Share

Recommended Posts

Beregron Community Regular

Beregron

Posted
Posted

Cheers Lee but i have zero desire to keep the auto IF i intend on more tuning with my M35.

I know i could build an auto to handle more power but it's the manual i enjoy. People will no doubt ask straight away "Why did you buy an M35 in the first place then???" and to be honest i didn't think i'd be this keen to build the thing as i am. I figured i'd add nice wheels, exhaust and do a few interior bits and be happy but the old modifying bug has hit again and instead of selling the M35 and buying something else (which is still an option) i'd like to continue exhausting options with this car first.

:cheers:

scotty nm35 Grand Master

scotty nm35

Posted
Posted

I don't really disagree...

I saw all the pictures on facebook of the build photo's which was why i spoke to them months ago. The above is what i was told. I agree that if the thing was a success there would be pictures or some kind of vids showing it off.

Two different cars mate. The first one has stalled from going broke I think.

PM Kinkstah about his auto setup. his spent big coin on his auto. shift kit, TCU tune, full paddle-shift setup. loves it. handles 400rwkw with no slip (apparently)

http://www.sau.com.au/forums/user/63726-kinkstaah/

The RE5 is a little different the the RE4 in the 34, and no-one is confident enough to fit the PCS auto controller (around 2K) just to find out there is a reason PCS discontinued releasing the RE5 kit.

After driving his car, I realised it is better than any manual I have ever driven. Auto ftw, if only they didn't overheat...

  • Like 1
Beregron Community Regular

Beregron

Posted
Posted

Two different cars mate. The first one has stalled from going broke I think.

That makes sense Scotty...

Plus i'm not building a race car or a drag car or anything of the sort.

I'm now building what i consider to be "cool" and to me RWD 6 speed in a M35 is cool. Other people will say that a built auto is "cool". A manual M35 would be a blast to drive in my opinion assuming i can continue to funnel money into it :yes: (which i certainly can)

scotty nm35 Grand Master

scotty nm35

Posted
Posted

Fair bit slower though, due to gear changes, and the whole rwd thing is what put me off. Skids and sliding are for Commodore owners. (and Craig)

If it were a decent box, like an air shifted hollinger sequential with the awd transfer case spliced behind... Now we are talking. :)

  • Like 2
Beregron Community Regular

Beregron

Posted
Posted (edited)

Yeah i agree it's certainly slower but It's old man in me that i enjoy shifting gears and the feeling of being involved in the process. Even in manual mode at high revs / boost my M35 isn't that keen on shifting at all... it does with my direction but it just doesnt feel right and is far from my above "cool".

I agree that a built auto would be the best from a performance point of view and be all "supercar" like but i would have to draw the line at $$$ at some point (i just get the feeling my line at the moment is higher than others)

I always think of it like this... (as i'm good at making money but fairly inequiped at working on my car)

1) The decide on the job i want do (in this case RWD manual + stand alone tuning)

2) I need to know the parts i need plus anything that will be custom made (HELP ME!!!)

3) Someone willing to not only undertake the job but i'd hope be interested in the result

So whatever this will roughly cost i decide if i am happy to make that financial committment. I don't think about if it's worth it based on how much the M35 is worth... i work out if it's worth it to me (ie. based on how long it would take to either save that cash or how long it would take to replace it from my finances..)

For me based on inital quotes from the tuning side i'm happy to spend that coin. The so far blank, bottomless hole is the manual conversion... if i can get a rough idea of the parts / costs i can make the same decision (which i think i'll be able to fully support).

and yes.... it will be cool!!

(and no not burn out / sideways cool... that is for commo drivers) :whistling:

Edited by Beregron
Beregron Community Regular

Beregron

Posted
Posted

have fun reading this thread first mate

http://www.sau.com.au/forums/topic/252088-m35-manual-conversion/page-11?hl=%2Bm35+%2Bmanual+%2Bconversion#entry7375859

I have read it plenty of times but not having any experience in conversions it's a bit confusing for me... i get a lot of the jist tho.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      S1 rb25/s14 starting problem

      By Duncan · Posted

      Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      Sorry. Front brake calipers
    • MBS206
      S1 rb25/s14 starting problem

      By MBS206 · Posted

      Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • 25zenki
      S1 rb25/s14 starting problem

      By 25zenki · Posted

      I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...