Jump to content
SAU Community

Recommended Posts

18 minutes ago, ElleAli76 said:

Thanks Corey, I'll ring GS now and check the time frame , if it's going to be another couple months, I'll ring you and go from there, prob get everything done at the same time , the break pads, rotors and the titanium tip ?

No worries, I will see if veales can get an ETA on them just to let us know

  • Like 1

 

7 hours ago, t_revz said:

Work sucked but I left early so wasn't all so bad. Fell asleep on the couch n just got up. Luckily fire is still going.

You?

Friday was ok, went to a builder after work to discuss a new build, today got to catch up with the olds then looking at land then catch up with Justin about a camera with any luck. other than that nothing much.

Hey trev. Worked this weekend. got a fair bit done. How was yours?



Hung blinds through all the bedrooms, chopped heaps of wood and various small jobs. Guy coming to check fire shortly and probably change flue cap to Venturi.

Heap of weeding to do around fruit trees now bit being sandy they come out easy.

Come round for a beer after work today-Wednesday if you want. Bring jade if she wants
3 minutes ago, shoey85 said:

Was a good weekend, caught up with my olds, looked at some land then saw Justin and Dean and bought a camera finally emoji6.png

Go karts sound like a good idea, Belmont or somewhere else?

What camera did you buy?




  • Similar Content

  • Latest Posts

    • HELP   Hey all, Is there an accelerator cable from another Nissan that can be used on the R33 GTST RB25DET with a Greddy forward facing plenum?  Thanks in advance  Rob 
    • Or do we think it was installed to give 1 bar of boost max, all day, everyday?
    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
×
×
  • Create New...