Jump to content
SAU Community

Recommended Posts

2 green thumbs,
 
30 plants put in the ground today to form a hedge,  3 hours weeding,
 
10 trees to plant tomorrow

3 hours weeding, way better than 3 hours welding! Are you going to put a bore and reticulation in? One of the best things I've ever done for the house, green all year round.
  • Like 1
Just now, Beyond Blue R33 said:


3 hours weeding, way better than 3 hours welding! Are you going to put a bore and reticulation in? One of the best things I've ever done for the house, green all year round.

yeah guy from work has his own bore drill. he already has the casing for me...just waiting for a day we have a day off together to put it in

  • Like 2
yeah guy from work has his own bore drill. he already has the casing for me...just waiting for a day we have a day off together to put it in

It's definitely the way to go. I Was so keen to get the driveway crossover in I forgot to sink the 25mm with the solenoid wires in first. Was a hassle to put it in afterwards and backfill it all.

haha yeah i bet it was. we are on an acre so im running a boundary supply with lines running from the fence in to their selected areas. im gonna put a 90mm pipe under the driveway so if i wanna put things through in the future i have plenty of room

  • Like 2
haha yeah i bet it was. we are on an acre so im running a boundary supply with lines running from the fence in to their selected areas. im gonna put a 90mm pipe under the driveway so if i wanna put things through in the future i have plenty of room

Bore water fuel pump to 1 acre square fuel rail to 25mm injectors.



  • Similar Content

  • Latest Posts

    • Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
×
×
  • Create New...