Jump to content
SAU Community

Recommended Posts

had the safety manager come out this morning saying that we hadnt done enough hazard reports for the year. the system has been down so until this week they couldnt track how many had been entered. 

 

but on the same page showing how few were done for us... it also showed that he had done fark all too!  so many muppets!! 

The last few months thay been banging about gloves in meeting prestarts big billboards roads signs must wear glove ppe coz we have too many cuts and scufs anyway today thay say think if you need the gloves coz last week some dude degloved his thumb bye bye thumb [emoji106]

Safety justification for job

 

  • Like 2
had the safety manager come out this morning saying that we hadnt done enough hazard reports for the year. the system has been down so until this week they couldnt track how many had been entered. 
 
but on the same page showing how few were done for us... it also showed that he had done fark all too!  so many muppets!! 

We had the safety lady come through work after we moved to new premises. Put a yellow auto lock cabinet in for hazardous materials. (paint, thinners, de-greaser, anti-seize, silicone. Etc.) she went off saying so you've put the cabinet painting and everything in the least ventilated corner of the workshop blah blah blah. Then I switched on the new massive smiths spay booth with full screens and ducting though the roof with a timer so it runs for a minute after you switch it off? She didn't even know what it was till I explained it to her? Madness!
  • Like 1
had the safety manager come out this morning saying that we hadnt done enough hazard reports for the year. the system has been down so until this week they couldnt track how many had been entered. 
 
but on the same page showing how few were done for us... it also showed that he had done fark all too!  so many muppets!! 

We have had weekly pre-start on ppe tools machinery forklifts etc. Pain in the ass every Monday morning! So I did a new word document condensed all the pre-starts ppe machinery forklifts into a first Monday of the month with everything included. Check boxes to tick off sign and date with a full machinery maintenance schedule for every piece of equipment. Lubrication tension levels etc. Has been saving time and working great unless I get a paper cut!
  • Like 1
The last few months thay been banging about gloves in meeting prestarts big billboards roads signs must wear glove ppe coz we have too many cuts and scufs anyway today thay say think if you need the gloves coz last week some dude degloved his thumb bye bye thumb [emoji106]
Safety justification for job
 

Thumb is a highly regarded piece of equipment that should last 80yrs! All the rolling folding crushing action machienes we have recommend fingerless gloves.
Left 20170520_172322.thumb.jpeg.b54e43b2a6ad4669b76450b7aa0db8e8.jpegleft20170520_172335.thumb.jpeg.01795b507186232251a1ef53164f7f6f.jpeg
right 20170520_172429.thumb.jpeg.743c4d01c4a45991d65ad80c69ee2a57.jpeg

And i dont think my boot liner fits in nice i think.......
As it dont have holes for plugs or i dont think it ment to interlock on the right i dont know .

All mine lines up pretty good in there and has the original studs for the strut brace with the plastic still on them. I would eventually like to get rid of the middle of the boot 12"sub deck it out with 2x10" subs on the sides with a mdf piano hinge panel with the amps on the back and a simple lift up for the spare wheel with the new rear Cusco brace?

All mine lines up pretty good in there and has the original studs for the strut brace with the plastic still on them. I would eventually like to get rid of the middle of the boot 12"sub deck it out with 2x10" subs on the sides with mdf a piano hinge panel with the amps on the back and a simple lift up for the spare wheel with the new rear Cusco brace?

I found a awesome looking greddy twin washer motor/ bottle setup. And need to fabricate a minimum 1ltr catch can then put a fire extinguisher in. I was going to enter the roll on event at barbagello on saturday night. But had a rattle near the turbo and found this. Then fixed a exhaust manifold bolt. Finished by 3:30pm and thought I'll take it for a spin? Fu## that ridiculous on a damp road let alone rain?DSC_0361.jpeg

I found a awesome looking greddy twin washer motor/ bottle setup. And need to fabricate a minimum 1ltr catch can then put a fire extinguisher in. I was going to enter the roll on event at barbagello on saturday night. But had a rattle near the turbo and found this. Then fixed a exhaust manifold bolt. Finished by 3:30pm and thought I'll take it for a spin? Fu## that ridiculous on a damp road let alone rain?DSC_0361.jpeg.5858b07dc8e537b674abcaadd9592c3c.jpeg

Bottom stud loose with no nut. Pulled piping and oil feed line cut a 10mm nut in half with grinder locked it up removed it loctited stud back into manifold and replaced with high tensile grip nut. Modified a 17mm spanner. DSC_0369.JPG
  • Like 2
1 hour ago, pol1on1 said:

The last few months thay been banging about gloves in meeting prestarts big billboards roads signs must wear glove ppe coz we have too many cuts and scufs anyway today thay say think if you need the gloves coz last week some dude degloved his thumb bye bye thumb emoji106.png

Safety justification for job

 

theres a great podcast by Freakanomics called"the dangers of safety" 

 

basically says if you drown people with JSA's and too many safety procedures they spend less time during the job thinking about safety. they also said before the NFL enforced helmets there were no deaths in its history. now with helmets mandatory people die every year from taking bigger risks and putting their body on the line

  • Like 2

All mine lines up pretty good in there and has the original studs for the strut brace with the plastic still on them. I would eventually like to get rid of the middle of the boot 12"sub deck it out with 2x10" subs on the sides with a mdf piano hinge panel with the amps on the back and a simple lift up for the spare wheel with the new rear Cusco brace?

Hmm d/s looks sweet. P/s looks like it's missing the back off the side part that would lock the rear in with the plugs?
6 minutes ago, Beyond Blue R33 said:


Hmm d/s looks sweet. P/s looks like it's missing the back off the side part that would lock the rear in with the plugs?

i have no idea what this means...

 

care to explain? lol

theres a great podcast by Freakanomics called"the dangers of safety" 
 
basically says if you drown people with JSA's and too many safety procedures they spend less time during the job thinking about safety. they also said before the NFL enforced helmets there were no deaths in its history. now with helmets mandatory people die every year from taking bigger risks and putting their body on the line

Flew up to a place called cs01 a few years ago. First pumping station on the natural gas pipeline to Perth. Had to put full s/s 22" spark arresting mufflers on the roof of fully insulated engine enclosures on wakeusha gas fired engines. Was mental. Spent the first day filling out forms down to what knot we were going to tie on the ladders to the roofs. Had to wait for a crane to come out from Karratha and lift the mufflers on the roof even though they had a big manitou that would have done it easily. Then more suits came out and purged the engine with inert gas and monitors to measure the atmosphere in and out side before I done any welding on the roof. Enerflex was doing a refit on the gas turbines at the time and it was crazy. Had to do the same on cs02 a bit later. No one there. Lifted with manitou, blocked off manifolds with plate filled out 1 jsa. First one took 3 days. Second one took a day? Same job? No wonder the state is broke.
  • Like 1

All mine lines up pretty good in there and has the original studs for the strut brace with the plastic still on them. I would eventually like to get rid of the middle of the boot 12"sub deck it out with 2x10" subs on the sides with a mdf piano hinge panel with the amps on the back and a simple lift up for the spare wheel with the new rear Cusco brace?

DSC_0370.JPGDSC_0371.JPGthe rear part of the p/s trim that goes behind the rear panel and mounts to the bracket.
  • Like 1



  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...