Jump to content
SAU Community

Recommended Posts



If he can be trusted with this:

IMG_0731.thumb.jpg.03f55f80fd9af0ba928f5dd6e5a45b2a.jpg

IMG_0732.thumb.jpg.9593da70e4248aba38fae5f6fa6fb714.jpg

My shit box won't be an issue! ?[emoji23][emoji6]

I thought the same thing when I took my car to 1st repairer (did/specialised in mustangs and restorations) ended up doing such a botched job, all i can say is some who specialises in imports. Anyway if marc can vouch for em should be ok


Active Red would be more appropriate

Drivers side speaker box sorted.DSC_0250.JPGHey Dean. Was just wondering. Cadence amp does 2x100w @ 4 ohm. Or 2x150w @ 2ohm both in L+R stereo. Speakers are 200w rms. 2x10" dual voice coil 2 off. Should I hook them up at 2 ohm or 4 ohm?. Sealed boxes.

Drivers side speaker box sorted.DSC_0250.JPG.d68a8334c3000d8e1e97f83082671afd.JPGHey Dean. Was just wondering. Cadence amp does 2x100w @ 4 ohm. Or 2x150w @ 2ohm both in L+R stereo. Speakers are 200w rms. 2x10" dual voice coil 2 off. Should I hook them up at 2 ohm or 4 ohm?. Sealed boxes.

Individual L+R off amp not bridged?
5 minutes ago, Beyond Blue R33 said:


Individual L+R off amp not bridged?

Ud wanna run them over powered wouldnt ya? If ur speakers are 200wrms ul need a amp of atleast 200wrms to power it properly.

  • Like 1

So 2ohm at 150w? Not going Going to buy a new amp.

I do know what you mean though. Amps are mounted and rubber insulated got full size 16x205x55 spare in with false floor. Speakers are going left and right hand side of boot. DSC_0251.JPGDSC_0252.JPG

Drivers side speaker box sorted.DSC_0250.JPG.d68a8334c3000d8e1e97f83082671afd.JPGHey Dean. Was just wondering. Cadence amp does 2x100w @ 4 ohm. Or 2x150w @ 2ohm both in L+R stereo. Speakers are 200w rms. 2x10" dual voice coil 2 off. Should I hook them up at 2 ohm or 4 ohm?. Sealed boxes.


4 ohm will go all day. 2 ohm could hit thermal cut out if loud for long.

I'd start at 2 ohm and switch to 4 if it doesn't work well
  • Like 1


What resistance are the subs?

4 ohm?

4 ohm single voice coil. 2 ohm dual voice Coil. Easy to change out. Might start at single 4ohm for less load on the amp at 100w If not happy change to double 2ohm 150w from the amp. Rockford fosgate prime r/2 10" shallow dual 4ohm subwoofer. Sealed boxes will put more load on the amp so maybe start at 4ohm then switch up to 2ohm. Only really crank rock and metal when the boy is in the car. I'm quite happy with the RB soundtrack except for cruising at 3000rpm at 120kph. Just weekend jobbing for fun really to play with my new nail/staple gun. Plus full size spare and L+R separation. [emoji4]



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...