Jump to content
SAU Community

Recommended Posts

Sup guys my mate Avacardo is gosting a cruise (quite a big long one about 2hrs) for anyone interested

I'm in for it Dean if nothing crops up! How's the recovery going? Not trying to get me arrested again? [emoji23] Seen a beast exactly like your 34 parked in Bennett Springs today but a coupe. Same colour and rims. Put some pics of your car in my screen saver at work. The boys loved it! She's a tidy machiene. Hope all is well with the wife and baby!
  • Like 1

Car stereo will never compete. 901's, gale gs401a, dual mordant short centres, 301 rears. 2x Yamaha 1x marantz and a 140wpc nad from the early 80s either watt meters.


Just a thought! Might have fitted the Nissan:-o DSC_0265.JPG.84668072bdd034387456de3d5f9f2ac4.JPGDSC_0268.JPG.6418231729271f783d2fbd5962b365e0.JPG

901's 250wpc at 8ohms, so beautifully efficient chained to the rafters. Running gale g's 401a's as subs. Audiophile at home. Got 2 Yamaha 1 marantz and a 140wpc nad with watt meters from the early 80's.
Anyone ready any of the hypergeat turbo thread? Currently up to page 539 since friday night, my head hurts


If you want the best balance, smaller highflow good for 250ish on 98 then run it on e85 for high 200s and minimal lag for everyday Street use. Enough go to get you solidly moving but without the 3500+ rpm boost threshold.

I'm not sold on the benefits of the 300kw+ ones vs off the shelf big buck engineering jobs. Surely a gtx3071/3076 will perform better for transient and response even if they make the same peak power.

  • Like 1

Yep. I normally go to Whiteman park and Malaga every year. 3 mins from home both directions. Followed every stage a few years back.

Went to the zig zag stage ages ago. Got all set up over the 3rd hairpin. Set up my camp chair got out the esky with some beers and chicken sandwiches. Looked down after about 15 mins to see I'd disturbed some Kalamunda locals being massive bull ants. All over the chair esky shoes and sandwiches were totally null in void with ants. Had to do a massive f##k dance shake everything down and spent the rest of the day with full paranoia and little itches that might have been more ants in the pants! Leeusseer:-)
  • Like 1


If you want the best balance, smaller highflow good for 250ish on 98 then run it on e85 for high 200s and minimal lag for everyday Street use. Enough go to get you solidly moving but without the 3500+ rpm boost threshold.

I'm not sold on the benefits of the 300kw+ ones vs off the shelf big buck engineering jobs. Surely a gtx3071/3076 will perform better for transient and response even if they make the same peak power.


I'm laggy up to 3500 with the SS2 but it doesn't affect it too much with the 4:1.1 and 5 speed if your in the right gear at the right time. With more power I'd definitely be looking at a lower ratio. So 115-120kph isn't 3000rpm cruising. Having said that the exhaust planes out pretty quiet for a 3" straight through and now we can give it "justice." On the stereo. Even 3-4 at 18psi didn't lag at the drags and it kept pulling hard at about 6750rpm over the line at 177kmph. Have shifted 5 at about 195kmph and it is always over 3500rpm in the rev range when you pull the next gear. With a kizza motor and tuning I couldn't see it being a problem?

Yep. Agreed. How did it run after the clean?


Same same. It starts better on cool mornings but only marginally. Perhaps a touch pokier taking off but maybe just my imagination. Fuel economy appears unchanged. I'll know by Friday when I refuel
  • Like 1
1 hour ago, TiTAN said:

 


If you want the best balance, smaller highflow good for 250ish on 98 then run it on e85 for high 200s and minimal lag for everyday Street use. Enough go to get you solidly moving but without the 3500+ rpm boost threshold.

I'm not sold on the benefits of the 300kw+ ones vs off the shelf big buck engineering jobs. Surely a gtx3071/3076 will perform better for transient and response even if they make the same peak power.
 

 

There isnt a whole lot of info on rb30dets in my desired relms of use. Most rb30dets area drag monsters...

  • Like 1
Im thinking atr43ss4/5. Ss2 mite chocke my rb30


Right rb30.

3076/3071 minimum. Anything that uses a stock rear housing isn't going to flow enough exhaust and will choke hard up top.

Gtx3071 with a 0.82 hot side should have full mumbo at 2500 but with 300kw potential. All the meaty ass midrange without making so much power that it's unreliable and laggy, if you want power more progressively use a 1.06 hot side.
  • Like 1
4 minutes ago, TiTAN said:

 


Right rb30.

3076/3071 minimum. Anything that uses a stock rear housing isn't going to flow enough exhaust and will choke hard up top.

Gtx3071 with a 0.82 hot side should have full mumbo at 2500 but with 300kw potential. All the meaty ass midrange without making so much power that it's unreliable and laggy, if you want power more progressively use a 1.06 hot side.

 

Gtx3582r with an 50mm external gate is what i was also thinking. Either way i think external gates gonna be better



Ss2 would be punchy on a 3.0l. What's your top end power goal?


High flows have been tried on an rb30 years ago. It was a cheap build basically stock Na bottom end with the 25 head and it came on like a light switch but come 5000 it hit a wall, by 5500 it had dropped about 100kw from memory.



  • Similar Content

  • Latest Posts

    • Manual boost controllers (where a little of the boost was bled off) were quite common back in the day, because they were cheap and easy. Generally they had a manual adjustment screw rather than being fixed like yours. Down side is they always bleed boost, not just when you want them to so an electronic boost controller that uses a solenoid will have less lag.
    • Hello , im new here and i have A31 home build  RB25det neo stock eng / turbo  aem ems 2 blue connector  aem 3.5 map aem cas disk aem wideband connected to ecu  355 lph pump 550 nismo yellow injectors side feed aftermarket regulator  and won’t start with base aem tuner basic tune eventually flipped cas 180 degree so it triggers on correct stroke not in exhaust cycle  Now it won’t start Wideband reads 10 and 11 at lowest fuel setting  and will share calibrations soon for aem tuner i think something is wrong in aem tuner    please if you have any information, am very grateful         
    • Legend. I ended up finding the facebook account of the owner of the first car i sent but sadly he deactivated the account. I think you’re right in saying it’s some sort of well done custom job. Really appreciate your help anyways.
    • Totally equivalent. Stock often goes from the comp cover because that's where the actuator is also installed and the factory needs 2" of hose to make the connection - and it comes as a pre-assembled unit. They totally have a boost reference from somewhere between the turbo and the throttle(s). Oh, jeez. Just do it in M12 then. We don't actually care that much. I would expect any such AN converter fitting to rely on an o-ring or some other seal onto a flat surface under the flange of the hex**, because bolt threads are no intended to provide a pressure seal. unlike..... pipe threads. **which also requires a suitably flat and smooth surface on the turbo's boss to provide the seal.
    • I also used NP   That’s were it’s seems to be the best place to fit it? All schematic shows also that it’s should be referenced from the turbo housing. But idk, I do see high hp cars without any connection or anything to their turbos, so I really don’t know how they connect their things
×
×
  • Create New...