Jump to content
SAU Community

Recommended Posts

thanks but im busy next few weekends.
work this weekend, camping in walpole following week then work next weekend
Man I love Walpole. Mum n dad's friends own the caravan park on the inlet. Funny Walpole stories. Me and my mate Jim rented a old van down there when I was 19, he's about 6'8" and 140kgs below zero temps. the whole bed on his end of the van collapsed snapped and dropped him on the floor outside he went crook and went to sleep in the landy with the engine on and heater running. I had beanie 2 t-shirt 2 jumpers 2 track pants 2 socks sleeping bag and sheets off all the beds. Wind was blowing in the hole like a hurricane and I nearly froze to death. Last time we went for Christmas. Took the gravel track down to the small rocky beach off the inlet. Family got out the car and charged to the beach. I opened the drivers side door got out and looked down at the massive f**king snake that reared it's head up and trapped me between it and the car. Just stood still for ages till it settled down then f**king bolted. Dad and I weren't catching much so took the dingy all the way out the inlet into the ocean. The outboard shit itself and we had to row the whole way back took hours, arms were burning for days. Have fun Trev. Still one of the best spots in w.a
  • Like 1
On 09/11/2017 at 4:22 PM, Beyond Blue R33 said:
On 08/11/2017 at 7:52 PM, R33kizza said:
+1 on beer after welding in this weather, nothin industrial like you bit still 2mm plates to 0.6 body steel.....

Did you mig or tig it? Butt weld with backing?

The plates come as direct fit so all we gotta do is clean and weld. Been running a small bead on the 0.6 first then turning the mig up to get a nice weld between the bead and the 2mm plate. Hot work inside the cars and u have to be careful u dont set fire to them lol

  • Like 2
Well thats not gd..... is it all over? Its not like ul be able to buff it out....


Mostly bonnet and right B pillar then there’s other imperfections in other panels, am I asking for too much here?
  • Like 1
20 minutes ago, shoey85 said:

 


Mostly bonnet and right B pillar then there’s other imperfections in other panels, am I asking for too much here?

 

I'd be taking it back to the painter,  you payed good money to have the car painted properly. Maybe take the car to other paint shops and ask their opinion on what the cause would be (in their experience) before you go back, so that you have an understanding.  

I wouldn't accept anything but perfection, if that's what you were paying for.

  • Like 1



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...