Jump to content
SAU Community

Recommended Posts

Hey guys,

I know this has been said to death about how to setup timing and all that, searched around and found a lot of info, but nothing definitive to this question i have.

Doing a 100k service, timing belt etc on my RB25 NEO. Upon taking the covers off and winding the engine over clockwise many times and double, triple and quadruple checking the timing marks, it would seem the exhaust cam gear is out by 1 tooth in the clockwise direction (i think advanced?).

I haven't taken the belt off or anything as yet, trying to make sure I get it all spot on when putting back together.

Is this a trick that some tuner has done for more power? The car has some odd daughter board in the ECU and was "tuned" by Dr Drift. Could they have done this to improve something? Should i put it back the same way?

Thanks, Kurt.

Link to comment
https://www.sau.com.au/forums/topic/456822-rb25-neo-exhaust-cam-gear-question/
Share on other sites

Here are some close up images with the stock belt still on. Haven't removed tensioner at all, this is how it was when I took the timing cover off.

Surely this isn't the right thing to have done, every thread i read suggests that 1 tooth is far to much to be of use and actually will kill engine power.

Inlet and Crank line up perfectly.

post-89402-0-76445100-1432224396_thumb.jpg

post-89402-0-55244800-1432224398_thumb.jpg

post-89402-0-01492000-1432224400_thumb.jpg

I suggest - buy ebay adjustable cam gear, the type with the steel outer gear not aluminium, install on exhaust cam. Adjust to stock position, see if it runs better or worser. Move back to 1 degree out if needed, or tune further to get max power. Problem solved for $80-90 and tuneability of engine increased.

One tooth on a cam wheel equates to 15 degrees on the crank.

Usual IGN static timing is 15 degree BTDC and has the CAS sitting pretty central in the slots.

Yours looks slightly retarded, perhaps compensating for the advance on the exhaust cam but one would need a timing light on it to be positive.

If the cam wheel had been set up a tooth retarded, there may have been a plan to bring boost on earlier or such, but set up a tooth advanced looks like a mistake to me.

  • Like 1

Yeah it's a real strange one. I have a timing light so that is no problem to check after. I've sourced an adjustable cam gear so i'll pop that in with it set to 0.. install the CAS at the same mark and see what it times at and adjust to 15 degrees if it's out. Would still love to know if it was a mistake or not... as you said, everything points to retarding it for any purpose.. but not advancing.

Unless you're going to degree the cam wheel I wouldn't bother with an adjustable wheel.

There's not much chance the marks on the adjustable wheel are going to be accurate enough to prove the point.

Handy if you decide to play with exhaust valve timing but you've also got the inlet to think about….too much hassle for me.

Well you have a point. We know that the timing should be on the mark, so really, i should just put it back on that marker. Also most people suggest that the NEO doesn't do much outside of the 0 mark anyway, so having the gear would be pointless? Ahh I dunno what to do now haha! I don't think the adjustable gear (Tomei) would give me enough adjustment anyway to go back to "one tooth out" would it?

Well i don't know what to do. The right thing to do is put it at the right marker. It is supposed to be on that really. From what i've read, i cannot see why anyone would want to advance the exhaust on a NEO by that much. Most say they lost significant power when adjusted outside of 0.

Completely stock. This looks like the first major service it's had in a long time. Certainly hasn't had any "engine work" as such. I just hope there hasn't been some drastic adjustments made in the ECU with the daughter board it has. Doubtful though as it seems to be a pretty basic chip anyway.

  • 5 months later...

Hi bro, just seeing how things went and did u need to set it out by 1 tooth again as I'very just changed all mine and yep 1 out so I set it all up correct and now runs like a bitch. Did yours do same thing? Cheers and I will look forward to your reply. Mick.

Hey Mick,

I haven't got around to getting the car finished yet, still waiting on a new CAS and then it should be good to go.

Strange that your having issues. What exactly is yours doing that is bad? The service manual suggests having the gear line up dead on the marks, and so do the opinions here, makes sense really, i don't know why it would ever need to be 1 tooth more and that info is not in the service manuals.

Hi bro, yeah mine was 1 tooth out on the exhaust side and now that I've lined all timing marks and put new belt on its holding back power a he'll of a lot and when I change into second gear it shoots a flame and just wants to die at times. I have a nistune board on the ecu (daughter board) like you. I'm thinking of putting it back to a tooth out again or leave it and see if a shop can fix it on a dyno tune and remap ect. It's doing my head in bad. Hopefully someone can help.. I will let ya know how things pan out. cheers talk soon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Maybe they'll look to do a bunch of presales to help inject some cash fast for their financial issues...
    • Does it also misfire equally when revving?   Josh is very correct in what you should do. The coilpack harness wiring loom itself is a known problem due to its age and the number of heat cycles it has gone through. Throwing parts at a vehicle to diagnose the issue isn't a smart or good way to do it. Secondly, you may have a bad coil pack, you pop replacements in, they fix that issue, but messing with the harness breaks it, so the issue persists. So now you think "well it wasn't the coil packs" and have to continue chasing your tail, potentially swapping back in your shit coil packs and returning the good ones (yes, I've seen people do this because 'it wasn't the problem' and they want to save money). And suddenly, you've got two issues with the same symptoms...   Diagnose, don't use the spare parts shotgun.
    • Well the articals keep saying a Q50s (Skyline in Japan) with a new Manual gearbox. I like the talk about the new looks with the round tail lights. I hope they bring back the retro look like they did with the Z
    • Off the back of feedback we have decided to mix up this next Motorkhana at Avalon to have some targeted skills practice for beginners to advanced. Saturday 6th September 2025 8:30am Capped 26 entries Standard Entry Fee: $89 Members Entry Fee: $55 (SAU Victoria Only) Entries Close: Friday 5th February  Where: 55 beach road Avalon. https://maps.app.goo.gl/HNUE3EuNue3sJxh38 Entries: Limited to 26 entrants (Passengers allowed over the age of 14 with a signed disclaimer and same safety gear) Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In. To compete in this event you will require A valid  AASA General Speed licence or (Day license via the AASA Website for $50) MA Licenses are no longer accepted by AASA https://aasa.com.au/  A helmet, long sleeve clothing and a 1KG mounted fire extinguisher recommended (But not Mandatory). Further details within Supp Regs on the enty link. Entry Link > https://www.sauvic.com.au/entry/deca/20250906 You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver. Bring your car and get to battle others, win, lose or draw. I can guarantee you will have lots of fun. Any questions email [email protected] Entry List: 1.Anna S 2. Luke S 3. Jesse Givens-Lamb 4. Luca Stamatescu 5. Madeleine Stamatescu    
    • Wanna rewrite all of that in, say, 2 or 3 separate sentences, so that we can read it?
×
×
  • Create New...