Jump to content
SAU Community

Recommended Posts

Hey guys, I'm quite new to the forum so forgive me if this was asked already. I'm in NYC, USA and was looking for a new performance exhuast option for my R34 GTT (Know of any other better options, please say!)

I stumbled on to the HKS HiPower and the HKS Slient HiPower. Does anyone know what is the exact mechanical difference? In your opinions, which sound better? The description of the two didn't help much, and low quality YouTube videos niether.

Also, if I want to get a exhuast silencer...would it make sense to install on the HKS Slient HiPower Exhuast? I feel the Silent version still has some strong sound from it, Or is it me?

How much power are you chasing?

Most Japanese systems need to meet the Jasma standard, which makes them very quiet, and usually flow less. Quite often there is a 70mm or 60mm restrictor inside the rear muffler which can be cut out with a die grinder cut off wheel if you want a bit more noise or flow.

I have the Silent HiPower on my GT-t and it's great. The difference between the two is that there is a second muffler added to the silent version just after the cat. For me it seems to kill any drone on the highway and makes the idle nice and quiet.

If you like in an apartment block or similar where your neighbours are quite close I'd recommend it, as its much quieter than other systems I've used

I was going to add a bigger turbo to hit +400HP. But how much would that change a exhuast sound? Louder or deeper/agreasive sound.

I tend to like exhuast sounds that are deeper (not lower just stronger sounding).

So check this. As soon as you put a 3 or 4" dump on that turbo your exhaust is going to sound worlds apart. It will be louder and aggressive.

Couple that with a hks whatever canon exhaust will be pretty loud I reckon.

Google the shit out of the exhausts you are looking at and check what people say.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...