Jump to content
SAU Community

Rb26 Engine Part Out And More......

Rowdyr32
 Share

Recommended Posts

Rowdyr32 Mentor

Rowdyr32

Posted
Posted

RB26DETT Engine for sale in Melb. Removed from a R32 GTR that was my weekend car. Sold the shell with plans to find a better shell. Have since moved on from the car scene. Note : These parts are from a running motor that hasn't had an exhaust wheel go through it unlike most stripped motors. All parts are in good condition as removed.

Complete head including inlet, inj, all sensors, all covers, coil packs and ignition module, exhaust manifolds and dumps, adjustable cam gears $1750

Complete bottom end with N1 pistons, sump, oil cooler etc $1250ono (can still see hone marks clearly). No scores. Beautifully balanced!

Starter motor $150

Alternator $150

AFM to turbo inlet pipes and BOV pipe $100

Twin turbo pipe $80

Trust hard pipe with two injectors. Guard to inlet $100

Factory PS oil cooler $100

Factory intercooler lower mounts $50

Engine alloy mounts to suit R32 $100

Engine loom to ECU $150

Resistor pack for injectors $150

Can do injectors and resistor pack for $350 for RB20 upgrade

Standard cam gears x3 $15 each

Coil packs $25 each

Cusco strut braces $150

3" cat back exhaust $150

I don't have anymore parts so please don't ask.

Also stupid questions will result in stupid answers :)

Link to comment
https://www.sau.com.au/forums/topic/457502-rb26-engine-part-out-and-more/
Share on other sites
Rowdyr32 Mentor

Rowdyr32

Posted
  • Author
Posted

Not sure on kms. I did roughly 10,000km in the car whilest owning it. First owner in Australia. Due to standard injectors I kept the power around 270-280. It hasn't had to a hard time.

Mr Skids the brand is"Cusco"

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Just_a_datsun
      RB26 block, rb26 head

      By Just_a_datsun · Posted

      Block bump. $400. As above cyl 6 needs bore or sleeve.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      I would think making the argument that the travel is limited by a spring flexing against a spring perch as "the same method". Later on in the document they do state that the spring can't bind on full bump travel and cannot come loose in full rebound travel as well. (which is all very sensible). The laws are actually pretty sensible and reasonable. It's just that the people who enforce and check them don't actually read them or know them accurately. "Oh, coilovers? Instant fail mate. Don't even need to look at it." - Guy who will be instantly reported by me. There is probably merit to people who do get defected for height also get defected for the suspension in that state that allows it. I did never consider the people who are complaining about coilovers being picked on are also running around at 50mm off the floor.
    • Kinkstaah
      Ethanol Content Sensor - Always at 11%?

      By Kinkstaah · Posted

      I think given SAU's knowledge of E85 we can strongly conclude that 10% ethanol in almost any situation is entirely fine. Almost all of the myths against E85 were overblown, let alone E10.
    • The Bogan
      Blue slip

      By The Bogan · Posted

      From your link See bold text, is this referring to damper settings, if so that may a issue for "some" inspectors, I cannot see aftermarket coilovers having the evidence that "must be available that its functional performance is equivalent to the original" Maybe just remove the adjustment knows and hope for the best???? Meh 5.2 Suspension travel In all instances, modifications to a vehicle’s suspension must ensure the integrity of the system and not compromise the ride quality. At least two thirds of the original suspension travel should be maintained in both directions (rebound (i.e. extension) and bump (i.e. compression)), and rebound must be limited by the same method used by the vehicle manufacturer or if this is not practicable due to the nature of the modification, an equivalent method. If an alternative method is used, evidence must be available that its functional performance is equivalent to the original.
    • Kinkstaah
      Blue slip

      By Kinkstaah · Posted

      They actually don't - They adhere to VSB14 rules just like Victoria. The rules are against CABIN adjustable height, and it quite clearly states that the height has to be within parameters. I asked the VASS engineer to confirm this when I got my car engineered and they refused to engineer the coilovers because they didn't meet the requirements for requiring engineering. (mine are height adjustable.) People "Not wanting to bother" with "Actually reading/knowing/adhering to the rules" should result in fines and immediately losing the ability to issue blue slips and/or RWC's in Vic.
×
×
  • Create New...