Jump to content
SAU Community

Recommended Posts

Hey guys, so currently I've got a gizzmo EBC installed in the car, but recently got my hands on a greddy profec b spec 2 which is now just lying around. Anyone had experiences with both of these ? I've read good things about both but obviously the greddy is more well known. Just wondering what people's opinions are and if I should just leave the gizzmo and sell greddy and avoid the hassle of installation costs and stuff. Running in a Rb25det r33 skyline, thanks for any feedback

Link to comment
https://www.sau.com.au/forums/topic/457649-boost-controller/
Share on other sites

  • 3 weeks later...

Profecs are the stupidest thing to tune. Warning boost pressure and start boost can be set in psi but actual boost is set in a percentage (face palm). Also what makes it stupider is that apparently it's the percentage of your actuator but if my 34 has a 3psi actuator and it's set at a full 100% higher how does it manage to boost past 6psi? Save yourself the headache and unless you plan on getting your car retuned I'd keep it as is

Its not a percentage of your actuator, its a percentage of duty cycle. Differenet types of cars have different actuators so the base pressure is different for each, a setting that equals 12psi on one would not automatically equal 12 on another. Its just a number, once you understand it its quite easy to work with.

I swear I've read somewhere that it had something to do with your actuator. My apologies, but I think the real culprits are greddy for not being able to set your boost in psi

Not many have that option. And even then they don't really work properly.

I think the real culprits are greddy for not being able to set your boost in psi

I agree, curse them for making a simple and effective well-priced boost controller that has been used worldwide successfully on countless cars ;)

Like I said, once you get used to thinking in duty cycle it's easy enough. You should try tuning an avcr including using the gear based option, lot more dicking about there rather than just a couple of settings.

The duty cycle has everything to do with THE actuator, it's just not a straightforward equation to YOUR actuator....you need to figure it out how much percentage duty cycle bleeds boost away from your actuator until you reach the target boost you're after, and then use start-gain and gain to make it come on quick, and then hold the boost level you want. I'll stop now, as this is all 'search results'.

Profecs are the stupidest thing to tune. Warning boost pressure and start boost can be set in psi but actual boost is set in a percentage (face palm). Also what makes it stupider is that apparently it's the percentage of your actuator but if my 34 has a 3psi actuator and it's set at a full 100% higher how does it manage to boost past 6psi? Save yourself the headache and unless you plan on getting your car retuned I'd keep it as is

My profec was easier to adjust than my old hks evc

I fail to see how this is problem?

  • Like 1

Please explain

I got a Ninja edit in while you were quoting and posting. I snuck in the word "2nd". Such a response would have been a response to the "real culprits are greddy" post and it would have been extremely well thought out and bitingly witty. Sadly I got sidetracked and allowed a lot of others to post and it all would have seemed a little bit late-to-the-party. But I wanted to make sure that people understood that I was all set for a moment of internet glory as a placeholder for the actual glory that didn't eventuate.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I found a supplier for an arm in NZ. https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-rh-side?srsltid=AfmBOopMdfCFDc_8yVZZ9kq5nIngPHRTBzUU8v4SAptJaRO52Wjs0bC6 I looked closely at the photo of that one and the Z1 arm, and it's the same bloody arm. Scratches all match in the photo 😂 How hard is it to change that joint? Also they seem to be listing two options https://thrashgaragenz.com/products/nissan-skyline-v35-z33-350z-front-lower-straight-arm-balljoint-rh-side?_pos=1&_sid=229acde44&_ss=r And now I have no idea what size I'd need yay
    • Ill review it again, from memory when I first saw some of Trailer Park Boys I wasn't a huge fan. I ended up at Letter Kenny after watching Shoresy, which is a bit ass backward, ha ha
    • "lol dunno" either But like you, I can't see any reason they would need to be different LHD to RHD
    • I agree with you WRT the hard top. MX5's may be one of the better looking soft tops but I cannot think of ANY car, EVER that looks better with a soft top vs a hard top (or a designed roof). At all, ever. I also feel this way about the C5 Vette, the Z06 looks horrible compared to it's original form, it has an exaggerated version of the differences you're talking about.  
    • Hey crew, Failed my WOF cause of a lower control arm, and I've decided to hit both arms, and also the compression rods at the same time(seems they're gonna be the most likely upcoming failure points from some discussions with the lads over on the G35 reddit). I've looking at these form Z1:  https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-compression-rod-p-40716.html https://www.z1motorsports.com/front-suspension/hayaku-automotive/hayaku-g35-front-lower-control-arm-p-40674.html I asked Z1 if they'd work as it's the same platform, just RHD vs LHD. I basically got told "Lol dunno". Specifically they aren't aware of any difference but can't guarantee fitment as they haven't done it on a 350GT. So guess I'm asking is if there is any issues with using 2005 G35 coupe suspension parts on a 2005 350GT coupe? Orginally I thought it could be something in the way of the arms that each control arm is designed to be positioned around, but that'd be an engineering nightmare for Nissan needing two different shaped control arms 😅
×
×
  • Create New...