Jump to content
SAU Community

Recommended Posts

Unfortunately the time has come for me to part with my Nissan Skyline R32 GTR race car. I used this car in production touring events as it allowed less modifications and was therefore a more econonmical categroy to run. It has Cams approved full roll cage, sealed engine and log book for N1 specification so there are many N1 parts fitted. The engine is fresh with forged internals etc. and has only had a few practice laps after being dyno tuned. The list of upgrades is extensive and includes adjustable coilover suspension, digital dash with GPS track mapping, special sump and oiling system, new competition clutch, upgraded fuel system, full N1 Brembo brake upgrade, aftermarket ECU and boost controller etc.etc. The car owes me close to 50K but looking for offers around the 30K mark but may be negotiatable or possibly listen to offers for cheap trade in and cash adjustment. There is a large inventory of spare parts that come with car including some passenger car pieces.

Car is square and has not had any structural issues or major hits so good platform to work with. I believe the car could be very competitive but never had enough funding like larger teams to fully develop and parity issues in my category didn't help. Would be perfect for other forms of motor sports like hill climbs, gymkhana, targa or crank up the boost and throw more money at it to go improved production or sports sedan etc.

This car is so much fun to drive on track (GTR guys know the feeling)and only selling because I have another race car to complete (different class altogether).

Sorry but not big on writing a full spec page of mods or posting pic's but interested people can ring me if genuine on 0421 848 324.

Please note that this is a race car only and cannot be registered.

Thanks Karl

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...